Device::SNP 1.2

Device::SNP is a Perl extension for the GE Fanuc SNP-X serial protocol as used by GE Fanuc DataPanel data terminals. See http://www.gefanuc.com/en/ProductServices/VisPCSolutions/DataPanel/index.html SYNOPSIS use Device::SNP; my $s = new Device::SNP::Slave( Portname => /dev/ttyUSB0, Debug => 0); $s->run(); Amarok serial interface program: datapanel.pl [-h] [-d] [-p portdevice] portdevice defaults to /dev/ttyUSB0 ABSTRACT This Device::SNP module contains an implementation of the GE Fanuc SNP-X serial protocol as used by GE Fanuc DataPanel data terminals. See http://www.gefanuc.com/en/ProductServices/VisPCSolutions/DataPanel/index.html DESCRIPTION DataPanels are usually used with PLCs to monitor and control industrial equipment. They provide a programmable bitmap display, programmable function keys, and can poll and display data values and set data values in a remote PLC using the SNP-X serial protocol. The Device::SNP::Slave object implements an SNP-X slave, opens a Device::Serial port and answers SNP-X requests to read and write data to a simulated PLC. This package also contains a sample application that uses a DataPanel 160 to implement a remote control panel for the Amarok music player on Linux, allowing you to play, pause, next, prev tracks etc. DataPanels are programmed with a GE application called DataDesigner, available from the GE web site for registered customers. Included in this package is a database for DataDesigner 5.2 for the Amarok remote control application. You will need DataDesigner 5.2 to download the datadesigner/linux.DTB database to the DataPanel 160 Tested on SuSE linux, but should run on pretty well any Linux or Unix..

Requirements:	No special requirements
Platforms:	Linux
Keyword:	Data,  Datadesigner,  Datapanel,  Devicesnp,  Fanuc,  Ge Fanuc,  Ge Fanuc Datapanel,  Ge Fanuc Snp,  Perl,  Protocol,  Serial,  Snp,  Used,  Used By
Users rating:	0/10