Bluetooth Signal Strength Monitor

MWavelan is a kernel network device driver for the WaveLAN/IEEE wireless network card, which supports signal strength reading from all the access points in range, plus some more features. All three drivers lack the ability to provide the signal strength measurement from all the access points...

this algorithm predicts the received signal strength for the mobile user to avoid fluctuation in received signal strength during localization of the mobile user(finding mobile user's location)

NetworkControl is a utility to control and monitor network interfaces, including wireless ones (for which you see a signal strength meter, as shown). NetworkControl addresses a conspicuous lack in most Linux distributions — most tend to be short on easy-to-use network utilities, even...


Platforms: *nix

The Ultimate Speed Test: - Speed Test (Actual Maximum speed) - Monitor Upload/Download transfer - Ping Testing - Website Downtime/Error monitoring - Website response time, connection time and bandwidth - QOS - WIFI Signal strength - LAN/WAN/Home network bandwidth testing - CPU Usage - Memory...


Platforms: Windows

This little mac app provides you with signal strength, network mode (GRPS/WCDMA/HSDPA), network name control over your connection, and statistics about your current connection (current throughput, total data transferred, connection time). It does this through a little icon in your menu bar (and a...


Platforms: Mac

A freeware program for Mac OS X which searches for and displays nearby wireless (AirPort/WiFi) access points along with information about their percent availability, maximum signal strength, and last contact time. The grapher window allows you to graph multiple signal strength parameters for the...


Platforms: Mac

BluePhoneMenu is a small application that adds Caller ID functionality to your menu bar and desktop using your Bluetooth enabled phone.BluePhoneMenu does not need to sync with your address book or run any complex tasks. Simply add BluePhoneMenu to your startup items and it will wait for a call...


Platforms: Mac

GKrellM BlueZ is a plugin that displays a graph of RX/TX bytes of Bluetooth adaptors. It uses the same layout as a Net monitor.


Platforms: *nix

AirFart is a wireless tool created to detect wireless devices, calculate their signal strengths, and present them to the user in an easy-to-understand fashion. It is written in C/C++ with a GTK front end. Airfart supports all wireless network cards supported by the linux-wlan-ng Prism2 driver...


Platforms: *nix

AirFart is a wireless tool created to detect wireless devices, calculate their signal strengths, and present them to the user in an easy-to-understand fashion. It is written in C/C++ with a GTK front end. Airfart supports all wireless network cards supported by the linux-wlan-ng Prism2 driver...


Platforms: *nix

iNet SMS Pro 1.0.4 is authentic software and user-friendly SMS component that convey your message to your targeted customers in the right time and right method. It can be GSM modem or Phone handset connected to the PC serial port using the data cable or Infra red device or any other. You can...


Platforms: Windows

Modem.pl is a small script that scrapes the web interface of a Motorola SURFboard cable modem for various status conditions like signal strength and signal to noise. The results are sent to STDOUT where they can be easily piped into a log file. The modem values are also checked for reasonable...


Platforms: *nix

AP Grapher is a freeware program for Mac OS X which searches for nearby wireless (i.e., WiFi, Airport) access points and graphs the signal strength as a function of time for the base station you are currently connected to. Although the program has a ostumblero like mode, itls not a true a...


Platforms: Mac

AirGrab WiFi Radar is a tool to display information about Apple Airport base stations and other WiFi (802.11b/g/n) wireless access points. Using AirGrab WiFi Radar you can determine most popular WiFi channels and select optimal channel for your WiFi network. Signal level and Noise level helps to...


Platforms: Mac

wmwlmon project is a WindowMaker dockapp which shows the state of a wireless network interface In the title you see the network interface name and a led showing if the interface link is active. As next you see the signal strength from the conntected access point in dB (decibel). The bar shows...


Platforms: *nix

MAPI is a general API for interfacing with any wireless device driver that support wireless extensions. It is based on the wireless extensions and Wireless Tools. The current version of the API can be used to get most of the information provided by the wireless tools (iwspy, iwconfig, iwpriv.)...


Platforms: *nix

dvbshout takes an MPEG transport stream from a DVB card, extracts audio channels from stream, and sends the audio to an Icecast / Shoutcast server. It had only been tested with DVB-S, but should also work with DVB-C and DVB-T. Example run: ./dvbshout dvbshout.conf DVB card name: "Philips...


Platforms: *nix

AirPort Radar is a Dashboard widget that helps you quickly scan the area for local AirPort wireless networks. Features include:Signal Strength at a Glance: Visual signal meters tell you the strength of the AirPort signal for an easy-to-read radar screen. Sortable Network List: Click on a category...


Platforms: Mac

A free 802.11 wireless scanner and connection manager for Mac OS X 10.6 Snow Leopard or later. This will detect access points and clients in ad-hoc mode if the SSID is being broadcasted. It can be used for wireless site surveys, wireless discovery, and to connect to wifi networks. The tool...


Platforms: Mac

Scanning for wireless networks is now easier and more personalized! AirRadar allows you to scan for open networks and tag them as favourites or filter them out. View detailed network information, graph network signal strength, and automatically join the best open network in range. Whether you...


Platforms: Mac