Angles Angs

[coordSys,as] = animEuler(h,rotSet,angs) animates the rotation of a dextral coordinate system using three arbitrary Euler angles (angs) about three axes (rotSet) in figure (h). rotSet is an array of 3 numbers in the range of [1, 3] representing the three body axes, so that rotSet = [3,1,3] is a...

Real Cut 1D is a computer program used for obtaining optimal cutting designs of one dimensional pieces which may have angles different of 90 degrees at both extremities. You can use Real Cut 1D to cut linear pieces such as bars, pipes, tubes, steel bars, etc.

Euler Angles To Quaternion Conversion for six basic sequence of rotations around X(Roll),Y(Pitch) and Z(Yaw) axis.Allowed Sequences: xyz, xzy, yxz, yzx, zxy, zyx.


Platforms: Matlab

You can input the angles and the axis about which the co-ordiante has to be rotated to visualize the rotation and orientation.you will have full control of what elements to be shown in screen, like path,plane of rotation,initial co-ordinate frame,etcDescription in short: : An Educating...


Platforms: Matlab

Computes Direction Cosine Matrix from Euler angles (in radians) for six basic sequence of rotations around X(Roll),Y(Pitch) and Z(Yaw) axis.Allowed rotations sequences:xyz, xzy, yxz, yzx, zxy, zyxORrpy, ryp, pry, pyr, yrp, ypr----------------------------dcmfromeuler.mfunction to compute DCM from...


Platforms: Matlab

Easy to use GUI that gives Euler angles for different rotation matrices and gives rotation matrices for different Euler angles. Also it animates the angle rotations one by one for more understanding.


Platforms: Matlab

It makes visualization of rotation with Euler angles. phi theta psi are changeable. Also it makes automatic conversion to axis-angle form of rotation. Any rotation can be represented as axis of rotation and angle of rotation. See euler_axis_angle_relationship.doc. Push "rules..." button.See also...


Platforms: Matlab

SpinCalc is a consolidated matlab function that will convert any rotation data between the 4 types included. Will also convert between 2 different Euler angle set types.Multiple orientations can be input. For N orientations:DCM ===> 3x3xN multidimensional arrayEA### ===> Nx3 matrixEuler Vectors...


Platforms: Matlab

This simple function use three points as input which can be 2D,3D...nD. And will calculate the area and angles of this triangle / polygon.The last version also support the precise 'Orthogonal-triangular decomposition' area calculation method.


Platforms: Matlab

Cut 1D X is an Automation Component used for obtaining optimal cutting designs of one dimensional pieces which may have angles different of 90 degrees at their extremities. Cut 1D X can be used for cutting linear pieces such as bars, pipes, tubes, steel bars, or any other material used by...


Platforms: Windows

Real Cut 1D is a computer program used for obtaining optimal cutting designs of one dimensional pieces which may have angles different of 90 degrees at both extremities. A Real Cut 1D can be used for cutting linear pieces such as bars, pipes, tubes, steel bars, etc. Features: Pieces to be cut...


Platforms: Windows

Flow past a wedge is governed by the Falkner-Skan equation. This equation admits only numerical solution, which requires the application of the shooting technique. The program plots the velocity for various wedge angles. The result obtained is in agreement with figure 8-10 in page 352 of Deen's...


Platforms: Matlab

This is an instructional GUI to be used for learning how Euler angles, DCMs, quaternions, and Euler vector parameters relate in the rotation of cartesian frames (A to B). Can also be used to convert between all 4 values, however see below for a function that accomplishes this.Features:- All 12...


Platforms: Matlab

This program simulates Gaussian beam propagation through a Fabry-Perot interferometer with adjustable error angles. The result is the intensity behind the cavity at a screen perpendicular to the propagation direction. It contains a GUI for setting the parameters and viewing the result.


Platforms: Matlab

-function angles=satang4(strSys1,latA,longA,longsat,strSys2,latB,longB)-calculation of satellite angles: elevation, azimuth, and also relative azimuth and baseline orientation if input data-belongs to two sites-Sources:-Digital satellite communications, 2nd Ed. Author Tri Ha, for satellite...


Platforms: Matlab

findEulerAngs generates Euler angle sets and animates rotations in response to user manipulation of a 3D rigid body (a box).Use the mouse to change the orientation of the box. A wireframe of the original box position will appear. The 'Euler Axis' button animates the rotation about the Euler Axis...


Platforms: Matlab

If the current axes have been rotated away from the X-Y view, this function will calculate the angles of the current x, y and z axes with respect to horizontal. These angles are used to rotate the current x, y and z axes labels to align them with their axes' directions.This only works for equal...


Platforms: Matlab

FaceTracker is a webcam-based system for the recognition of face movement around various angles as well as translation of the face. It is intended to be used under Linux OS. Currently, pan angles can be detected up to 45 degrees.


Platforms: *nix

ratDVD allows online DVD movie download including menus, multiple audio tracks, video angles, subtitles, bonus materials and covers. ratDVD files can be viewed on the PC or get converted back to a DVD+-R(W).


Platforms: Windows

The program "Satellite Antenna Alignment" is used to calculate the angles necessary for installing satellite dishes. The main difference from similar software is the possibility to calculate the position for all satellites at once. Thus, you get a clear picture about what satellites can be...


Platforms: Windows, Windows 8, Windows 7