Wavelength Frequency

You can use 4 types of filters:- Butterworth- Chebyshev 1- Chebyshev 2- EllipticYou can use them as:- Lowpass- Highpass- Bandpass- StopbandShowing theirs features in frequency, phase and the z plane. After the desing phase you can apply the designed filter in real time to incoming audio signal...

This routine computes the fft of the input signal and removes power at the annual (or any specified frequency) by replacing the power at that frequency with the average of terms on both sides; this is done in the sine and cosine terms so as to average the power and the phase.

function y = getiq(x,freq)this takes in the frequencies X that were received at a rate of FREQ and gives you a complex value which is I and Q - this is used when you have frequency X changing and the phase is cumulative - meaning it does not start each new frequency at the same spotORfunction y =...


Platforms: Matlab

I started with Adam Wyatt's FROG program (on this website) but added to it and edited it beyond recognition. I did, however, subtract one useful feature: This program, as written, is SHG-FROG and GRENOUILLE only!! (Adam Wyatt's program was more general.)--> The program "prepFROG" takes a raw...


Platforms: Matlab

This will ask for antenna heights then ask u for the frequency band..then it will use the okumura model and give u the simulated output....


Platforms: Matlab

Accepts temperature in Kelvin, pressure in millibar and wavelength in microns (accurate for wavelengths 0.20-4.00 microns) and returns the model atmosphere Rayleigh angular volume-scattering coefficient. Includes Chandrasekhar phase function.


Platforms: Matlab

A still atmosphere attenuates sound as a function of frequency, temperature, relative humidity, and propagation distance. This function uses equations published by Bass et al. to calcuate the attenuation of sound for the input parameters. The function returns the attenuation in decibels.


Platforms: Matlab

Frequency response signal analyzer for linear and non-linear control loops and dynamic systems. Simulink model. Sine sweep based similar to dynamic signal analyzers for physical systems. User specifies: freq limits, freq decrement, averages, phase criteria for moving to next frequency, start...


Platforms: Matlab

It is the version in global Heart VI1 simulator simulink where the electrical part of heart is followed by a frequency detector to pilot the feedback of CNS,central nervous system who loop and control sinus.Sometime you can have pile-cache problems compiling before computing.


Platforms: Matlab

This GUI can be used to analze control systems in time domain, in frequency domain and using using state space analysis techniques. It also provides an additonal feature of designing a second order system in state space design using pole placement approach.


Platforms: Matlab

If you have multiple figures (or one) with multiple axes (graphs) (or one) which all have the same (or similar) x-axis (time, frequency, order, ...), this function makes it possible to navigate (zoom, scroll) in all those graphs by easy keyboard control.


Platforms: Matlab

An M-File for automated tremor analysis which returns the amplitude and frequency of tremor recorded with Polhemus Fastrak.Relies on functions within the Signal Processing and HOSAtoolboxes.


Platforms: Matlab

URL Content Field is a Drupal 7 field type that pulls in content from a given URL on a given frequency. By itself, it's useful for applying Drupal search to non-Drupal sites or keeping an archive of a specific URL over time (as node revisions). Beyond that, future submodules should be able to...


Platforms: PHP

CoreMoid is a simple but usefull plasmoid to set the CPU frequency. It can display the usage and current clock rate. The applet use DBus to interact with the cpufreq subsystem. This version only runs on multi core/cpu systems. Single CPUs are not yet supported, but is the main target for version...


Platforms: *nix

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.


Platforms: *nix

c2ctl is an Intel Core and Core 2 frequency and voltage modification utility. Its main purpose is overclocking and / or "undervolting" and to enable SpeedStep.


Platforms: *nix

k10ctl is an AMD Family 10h (aka K10) P-State, frequency and voltage modification utility . Its main purpose is overclocking and / or "undervolting" the CPU and to configure Cool'n'Quiet settings.


Platforms: *nix

AJ Sealed Designer is a sub-woofer design program for solving the required calculations for sealed speaker box designs. AJ Sealed Designer provides accurate theoretical calculations for speaker and box enclosure parameters with an easy-to-use interface. It also includes a box calculator to...


Platforms: Windows

This free loan payment calculator for Windows allows you to quickly calculate loan payments based upon variable payment frequency! Offers Daily 365/year, Daily 360/year, Weekly, Biweekly 26/year, Bimonthly 24/year, Monthly, Quarterly, Biannual, and Annual payment periods. Free Loan Calculator...


Platforms: Windows

The powerful easy-to-use digital audio editing program you can use. With Audio Editor you can: 1-Open a lot of audio files lik. MP3,MP2,WAV,WMA,OGG,VOX,G726,RAW,DSS,CDA,MPC,PCM,GSM¦etc. 2-Save to several audio formats: MP3, WAV, VOX, OGG, G726, WMA, and RAW 3-Edit ID3 Tags of the following...


Platforms: Windows