Transmitter Circuit

PCB Wizard was developed to be a powerful package for designing single-sided and double-sided printed circuit boards (PCBs). It provides a comprehensive range of tools covering all the traditional steps in PCB production, including schematic drawing, schematic capture, component placement,... Platforms: Windows

Use any simple radio transmitter to send Audio/Video or any other form of data via the soundcard. Rates up to 400kb/s possible. With two transmitters, 2way communication is possible. Uses quadrature amplitude modulation scheme (QAM). Robustness is done with Read Solomon coding, interleaving, and... Platforms: Windows, Linux

The 3 phase induction motor is modeled to accept the No-Load & Blocked rotor test results for determining the equivalent circuit parameters. The model is used to simulate various performance characteristics. these characteristics can be viewed using a scope. Platforms: Matlab

In biomedical applications it need to be using simple circuit for convey the data information ,this design it can be used as digital modulator for low bit rate. And select or programming the appropriate scheme modulation (ASK, FSK, BPSK). Platforms: Matlab

Chip Get Image is a plugin that grabs images by using its unique Short Circuit Speedy Logic. It is very flexible and easy to use plugin for adding thumbnails, featured images or other images to the blog posts.Short Circuit Speedy Logic is highly flexible that gives you power to grab an image by... Platforms: PHP

ProtoCAD is a tool for creating circuit schematics rapidly. It is developed for use with stripboards but can also be used with other methods. The development of ProtoCAD was inspired by another tool called StripCAD which had the disadvantage that besides being closedsource, it was sadly not... Platforms: Mac

A Software Defined Radio (SDR) QUISK is a Python module that controls a receiver and transmitter. QUISK rhymes with "brisk", and is QSK plus a few letters to make it easier to pronounce. QSK is a Q signal meaning full breakin CW, and QUISK has been designed for low latency CW operation. It works... Platforms: *nix

ShortCut is a printed circuit board (PCB) design software. It is intended for people who develop small electronic devices and do not want to be annoyed by the PCB design process.ShortCut has some advanced functionalities. Platforms: *nix

The PWA toolbox is a Matlab Toolbox for the definition and the circuit implementation of Piecewise-Affine (PWA) functions. It can be used to define and synthesize PWA solution of Model Predictive Control, state estimation and PWA approximation. Platforms: *nix

Private NetcastingO from EnjoyMyMedia is a free personal broadcasting system that is the safest, simplest way to share your life and stay regularly connected to friends and family. Private Netcasting continuously broadcasts personal multimedia--photos, videos, audios, docs, any file--over the Net... Platforms: Windows

Elplek is a short circuit and load flow program for small electrical networks. It calculates all currents in a network in the case of different faults (three phase fault, line to line fault, line to earth fault, line to line to earth fault). The initial short circuit currents Ik" are calculated... Platforms: Windows

A calculator for working out the length of Scalextric slot car tracks, calculates the difference between each lane of a circuit. Platforms: Windows

EnjoyMyMedia is a free personal broadcasting system that is the safest, simplest way to stay regularly connected to friends & family. EnjoyMyMedia broadcasts your multimedia--photo, video, mp3, doc, any file--over the Net in live, PRIVATE channels (RSS-feeds) & turns the act of saving a file into... Platforms: Windows

If you like motorbikes and obstacle circuits then you`ll love this 3D game.The game is simple to control. You start by choosing the bike depending on your preferences, as each bike has a different power and maximum speed.The bike is controlled by the moving the cursor up to accelerate, down to... Platforms: Windows

ControlX10::CM17 is a Perl extension for FireCracker RF Transmitter. SYNOPSIS use ControlX10::CM17; # $serial_port is an object created using Win32::SerialPort # or Device::SerialPort depending on OS # my $serial_port = setup_serial_port(COM10, 4800);... Platforms: *nix

KFilter is a tool to design acoustic loudspeakers in the theoretical way. It provides an interactive analysis of the equivalent analogue circuit design. This is useful to create a good draft construction which can be improved by further measurement. Future measurement features are planned.. Platforms: *nix

FLASH-PLAICE is a powerful in-circuit development tool that combines the features of a flash programmer, an emulator, and a high speed multi-channel logic analyzer into one device. The project runs uClinux. The logic analyzer features up to 200MHz sampling rates and up to 32 input channels. The... Platforms: *nix

MacSpice is an electronic-circuit simulator based on Spice 3f5.MacSpice is a superset of the Berkely release and includes new models and many bug-fixes and enhancements. Platforms: Mac

MI-SUGAR is a lightweight electrical circuit analysis environment which uses the free simulators SPICE and Gnucap. You can create analog circuits using the schematic entry tool or the netlist editor, then run the simulation and analyse the results in the graph plotter. Platforms: Mac

Slotcar race management system & track layout editor. The Race Management System: manages up to 8 lane lanes with a 1/1000 sec precision all statistics per driver, slot car and races direct publishing of your race, score, circuit, tournaments on the WEB easy and quick race parameters... Platforms: Windows