Telephone Network Interface Device

This script uses the Linux SIOCGIFADDR ioctl to find the IP address associated with a network interface, given the name of that interface, e.g. "eth0". The address is returned as a string containing a dotted quad. Platforms: *nix, Python, BSD

pktstat displays a real-time list of active connections seen on a network interface, and how much bandwidth is being used. Partially decodes HTTP and FTP protocols to show what filename is being transferred. X11 application names are also shown. Entries hang around on the screen for a few... Platforms: *nix

IFMonitor is a simple network interface monitor for KDE. With IFMontor you can see how you are using your network bandwidth. It depends by QWT library, by Uwe Rathmann and Josef Wilgen. Platforms: *nix

Local IP Takeover provides network link redundancy within a single server that has multiple network interface cards (NICs) with each NIC connected to separate network switches. If the primary NIC fails (i.e. it cannot ping its default gateway), the "service" IP (the IP that the outside world... Platforms: *nix

ifstat is a tool to report network interface bandwith just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. fstat gathers these statistics from the kernel internal counters, which is highly... Platforms: *nix

ifmetric is a Linux tool for setting the metrics of all IPv4 routes attached to a given network interface at once. This may be used to change the priority of routing IPv4 traffic over the interface. Lower metrics correlate with higher priorities. ifmetrics purpose Sometimes two network... Platforms: *nix

Arphound project is a tools that listens to all traffic on an ethernet network interface, and reports IP/MAC address pair, as well as events such as IP changes, IP conflict, IP addresses with no RDNS, various ARP spoofing, and packets not using the expected gateway. Reporting is done to stdout,... Platforms: *nix

ifGraph provides a tool to create graphs of network interface traffic via SNMP queries. ifGraph is a set of Perl scripts created to help network administrators to visualize network flow on a daily, weekly, monthly, and yearly basis. The graphics are created with RRDTool, and it shows bytes... Platforms: *nix

ZorbIPtraffic shows the IP traffic on a network interface in real time.It can display traffic statistics for each IP on your internal network, and it summarizes the total traffic for each IP per year, per month, and per day. Platforms: PHP

It's a Linux program for using char devices in a network. You may open, read, write, etc... any char device in a computer network. For example, you may open a remote /dev/dsp and run mpg123 on it Platforms: *nix

KWirelessMonitor is a small KDE application that docks into the system tray and monitors the wireless network interface. It supports both Linux (tested on several major distributions) and FreeBSD (tested on 5.2.1). I wrote this because I like the compactness of the Wavelan/Orinoco monitor in... Platforms: *nix

giwconfig is graphical user interface which displays information about a wireless (WiFi) network interface. Whats New in This Release: - The program now scans for a wireless interface on startup instead of using a hardcoded interface.. Platforms: *nix

FREE Network Management & Device Configuration Tools. Runs as a Service. CatTools is a utility for managing routers switches & other network devices. Provides automated configuration backups, password changes & scripted configuration commands. Multiple device types supported... Platforms: Windows

Netspeed is a simple network interface bandwidth monitoring program for Windows x86/x64. It requires Microsoft .NET environment 2.0. Displays current network download and upload speed on selected interface in small window and in system tray. Shows current internet uplink usage percentage. Platforms: Windows

barricade is a simple implementation of the door knocking method aimed to open your network service or firewall only if a special ICMP echo request packet is sniffed from the network interface. After the last valid packet received, barricade waits for a defined amount of time, then it closes your... Platforms: *nix

wmwlmon project is a WindowMaker dockapp which shows the state of a wireless network interface In the title you see the network interface name and a led showing if the interface link is active. As next you see the signal strength from the conntected access point in dB (decibel). The bar shows... Platforms: *nix

KNetStats is a simple KDE network monitor that show rx/tx LEDs or numeric information about the transfer rate of any network interface in a system tray icon. The source code of the current version (v1.3) is avaliable for download at Sourceforge download and CVS servers.. A simple KDE network... Platforms: *nix

ltraf is a simple utility to list traffic flowing through a computers network interface. It can categorize the traffic based on bpf rules. It uses libpcap to capture network traffic. The main goal of the project is to give systems administrators a chance to visualize the traffic flow through a... Platforms: *nix

KNetDockApp is a small application that docks in the systray and monitors the activity of the selected network interface. KNetDockApp also monitors the link status and can detect if a networking cable is attached to the nic or not. Supports session management, and runs on next logins. Whats... Platforms: *nix

Do you use VPN? So surely you had cases when it was necessary to perform some action after the VPN-connection has been established, for example to run some programs. If you are a system administrator, than from time to time you have to add or to remove routes when VPN-connection is going up or... Platforms: Windows