Multimeter

This is a MATLABdlT« instrument driver for use with v2.0 of the Instrument Control Toolboxd-OC?D? and higher. It supports the AdvantestdlT« R6552 digital multimeter.It is a MATLAB IVI instrument driver that requires the Advantest avr6552 IVI-C instrument driver to operate. This driver may... Platforms: Matlab

Gives a good understanding of using the linear transformer block to step down the given input voltages. GOTO and FROm blocks are also used for signal routing and selected measurements are plotted using multimeter and the scope. Platforms: Matlab

Mido is a GUI for MultiPlatform Digital Oscilloscope with a generic multimeter and a spectrum analyzer.Mido can work in demo mode or using variuos extern analogic-digital converter connected in the parallel port. Kernel drivers are included Platforms: *nix

The PyVISA package enables you to control all kinds of measurement equipment through various busses (GPIB, RS232, USB) with Python programs. As an example, reading self-identification from a Keithley Multimeter with GPIB number 12 is as easy as three lines of Python code: Platforms: *nix

QtDMM is a DMM readout software including a configurable recorder. A friend of mine asked me for a DMM readout software for Linux as the DOS software he had was not really usable. Additionally it featured numerous hefty translation errors in the GUI. To help him out I wrote this little piece of... Platforms: *nix

PicoScope is a comprehensive software application for Pico Technology PC Oscilloscopes. Used with a scope device from Pico Technology, it creates a virtual oscilloscope, spectrum analyser and multimeter on your PC. PicoScope 6 supports the following scope devices: PicoScope 6000 Series PicoScope... Platforms: Windows

AveDesk is a tool that enables desklets on your desktop: desklets are small graphically pleasing mini-applications that are useful and fun to use. A desklet can be anything, a small sticky note, a weather foresight, a calculator, etc. It all depends on the imagination of the desklet creator.... Platforms: Windows

kpib.m contains code for GPIB and serial port communication for a number of scientific instruments, organized so that a single common command syntax can operate them all. For example, the command:r = kpib(INSTRUMENT,GPIB,'read');will return the voltage and current reading from a number of... Platforms: Matlab

Tested in R13!!!================This app is designed to allow easier interfacing with interfaces such as GPIB, Serial, and others (though honestly I've never tried it on anything other than an iotech GPIB.)For information on interfaces, check out>> instrhelpNOTE: In this app, I refer to... Platforms: Matlab