Local Mac Address

The only software for the Mac authorized by UPS for rating, shipping and tracking day to day domestic UPS shipments. Built in importers allow you to quickly bring in address books from UPS Worldship or UPS.com, making it simple to 'switch' to the Mac. Perfect for anyone who ships domestic...

How do you send a text message or SMS? Are you using the T9 input method? Are you also wondering why you are using these small keys with numbers on it to enter text while you have your Mac keyboard in front of you? Then SMS Mac is for you. Use your Mac to enter SMS text and send the SMS through...

Chase IP Allows you to view local computers on your network, shows remote ip address's that you are connected to and detects the country from the connection also. Raw information for each packet of information is shown. We have used this to monitor the xbox and the countries that it connects to....


Platforms: Windows

MobileMe Button (was Dot Mac Button) Now you can access all your MobileMe Mac apps and webpages from this tiny widget. Click on the left or right sides of the widget to move the widget in your Dashboard. Click on the top arrow of the widget to access the local Mac applications on your hard drive...


Platforms: Mac

NetCom is a software for system administrators, IT-professionals and advanced users. With NetCom you can give full control over local area network (LAN) and over INTERNET connections. - support for remote scripting (with Microsoft Active Scripting) and provide useful remote administration...


Platforms: Windows

NBTScan is a NetBIOS Name Network Scanner. NBTscan is a program for scanning IP networks for NetBIOS name information. It sends NetBIOS status query to each address in supplied range and lists received information in human readable form. For each responded host it lists IP address, NetBIOS...


Platforms: *nix

ArpSpyX is an ARP packet sniffer that displays a list of IP and MAC addresses found by analyzing ARP traffic on your network. Arp packets are an indicator of what machines are active on your network. ArpSpyX will passively sniff your network for ARP packets and display the IP and MAC address of...


Platforms: *nix

RogueScanner project is an open-source vulnerability management tool that is used to gain greater network visibility to enable you to quickly identify and remove rogue wireless devices that may provide a back door to access your critical data and infrastructure. Considering that rogue access...


Platforms: *nix

Regexp::Common::net is a Perl module that provide regexes for IPv4 addresses. SYNOPSIS use Regexp::Common qw /net/; while (<>) { /$RE{net}{IPv4}/ and print "Dotted decimal IP address"; /$RE{net}{IPv4}{hex}/ and print "Dotted hexadecimal IP address"; /$RE{net}{IPv4}{oct}{-sep => :}/ and...


Platforms: *nix

BridgeQuery is a Perl extension for retrieving bridge tables. SYNOPSIS use SNMP::BridgeQuery; use SNMP::BridgeQuery qw(querymacs queryports queryat); $fdb = queryfdb(host => $address, comm => $community); unless (exists $fdb->{error}) { ($fdb->{$mac} = "n/a") unless (exists...


Platforms: *nix

LaBrea is a intrusion detection / "sticky" honey pot technology using virtual servers to detect malware. LaBrea takes over unused IP addresses, and creates virtual servers that are attractive to worms, hackers, and other denizens of the Internet. The program answers to connection attempts in a...


Platforms: *nix

arp-scan sends ARP (Address Resolution Protocol) queries to the specified targets, and displays any responses that are received. It allows any part of the outgoing ARP packets to be changed, allowing the behavior of targets to non-standard ARP packets to be examined. The IP address and hardware...


Platforms: *nix

Typing the MAC-address of your ethernet card shows you its vendor. Useful for war-driving :-)


Platforms: Mac

SpoofMAC is a free program that can change the MAC Ethernet Hardware Address from, and only from, an AirPort Extreme card.


Platforms: Mac

Wake-On-LAN Sender can be used to turn on remote computers sending magic packets (UDP). This freeware utility supports SecureOn password and allows to identify MAC addresses of LAN computers. It can run hidden with command line parameters: WakeOnLan.exe /ComputerName, if the ComputerName entry is...


Platforms: Windows, Windows 7, Windows Server

The program receives magic packets and can be used as a Wake-On-LAN configuration troubleshooting tool. It allows to select local network adapters and create Windows Firewall exceptions. Requires administrator rights.


Platforms: Windows, Windows 7, Windows Server

For example you have a lab setup with 20 hosts. Each host can boot two operating systems. Maybe you want to know how many hosts are up and also which kind of operating system is running. In LabStatus you can define a set of hosts with hostname, ip-address and mac-address. You can also configure...


Platforms: Mac

This is application used to gather computer's configuration info. Collected data imported into Sklad application Collects data: 1. MAC address 2. Name of the logged-in user 3. IP address 4. Name of the computer 5. OS version 6. Date of collection 7. Type and count of CPU's 8. CPU's clock...


Platforms: Mac

This script can be used to control motors connected to Roboteq motor controller. Right now the code is for controllers which are accessed over a local tcp/ip network. Replace the ip address with yours. That should be enough to run the motors.


Platforms: Matlab

2X VirtualDesktopServer helps companies experience the full benefits of desktop and application virtualization by improving desktop manageability, security, accessibility and performance. Lower your overall operating costs by delivering secure, centrally-managed access to virtual desktops (VDI)...


Platforms: Mac