Linksys Firmware

OpenPCD is a free and open RFID reader reference design platform. The OpenPCD firmware is software that runs in OpenPCDs AT91SAM7 ARM controller, and connects the RFID reader hardware (CL RC632 ASIC) with the Host PC via USB. The Firmware includes a custom USB device stack and drivers for the... Platforms: *nix

Wireless-G is the upcoming 54Mbps wireless networking standard that's almost five times as fast as the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country +¦ but since they share the same 2.4GHz radio band, Wireless-G devices... Platforms: Mac

This free version can only restore typical firmware malfunction of Maxtor 541DX series HDDs but not for others.If you need to restore other series of Maxtor HDD, you can purchase our professional version Maxtor Firmware Repairer PRO. Platforms: Windows

This free version can only restore typical firmware malfunction of Maxtor 541DX series HDDs but not for others.If you need to restore other series of Maxtor HDD, you can purchase our professional version Maxtor Firmware Repairer PRO. Platforms: Windows

LED Cinema Display Firmware Update addresses intermittent audio issues some users have experienced while using the 27-inch LED Cinema Display. This is a different update from the LED Cinema Display Software Update 1.0 released in September 2010. The updater application will be installed in the... Platforms: Mac

This update is for specific iMac computers with an ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card installed, running Mac OS X 10.5.2 or later. It updates the ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card firmware in the iMac to improve system stability. This... Platforms: Mac

This update is recommended for all Mac Pro (Mid 2010) models and addresses the following issues: * Resolves an issue that prevented the firmware password prompt from being displayed * Resolves an issue that prevented the Boot Picker from being presented if Ethernet is connected to a network... Platforms: Mac

This update includes changes to the Lights-Out Management environment of the Xserve (Early 2008). It addresses issues that cause frequent power supply and fan notifications to be sent. This update is strongly recommended for all Xserve (Early 2008) systems. The Xserve Lights-Out Management... Platforms: Mac

This update fixes several issues to improve the stability of Xserve computers. To complete the firmware update process, perform the following steps: 1) Locate Xserve EFI Firmware Update.app in /Applications/Utilities and double click on it. 2) Follow the onscreen instructions. If you will be... Platforms: Mac

This update fixes intermittent system freeze issues for iMac computers with ATI Radeon HD 4850 graphics and fixes wake-from-sleep issues in Boot Camp. To complete the firmware update process, please follow the instructions in the updater application (/Applications/Utilities/iMac EFI Firmware... Platforms: Mac

Apple Mac mini EFI Firmware Updater includes fixes that enhance the stability of Lion Recovery from an Internet connection, and resolve issues with Apple Thunderbolt Display compatibility and Thunderbolt Target Disk Mode performance on Mac Mini (mid 2011) models. Platforms: Mac

Thunderbolt Display Firmware Update improves the stability of the Apple Thunderbolt Display. The updater application will be installed in the Utilities folder inside the Application folder and will be launched automatically when you close this installer. Please follow the instructions in the... Platforms: Mac

A simple to use backup solution. Drobo utilizes the revolutionary BeyondRAID storage technology that protects data against a hard disk crash, yet is simple enough for anyone to use. As long as you have more than a single disk in Drobo, all data on Drobo is safe no matter which hard disk fails.... Platforms: Mac

This package provides utilities for parsing and utilising the information in an iSCSI Boot Firmware Table (iBFT). The iBFT is a table created by iSCSI boot firmware (such as Etherboot), in order to pass parameters about the iSCSI boot device to the booted operating system. There are three... Platforms: *nix

leJOS is a Java-based replacement firmware (OS) for LEGO Mindstorms programmable bricks, including RCX and NXT. It supports threads, exceptions, synchronization, floating point arithmetic, strings, and so on, but there is no garbage collection yet. The project is also designed to be portable to... Platforms: *nix

Pap2Mon is a Linksys PAP2 voip online monitor SuperKarmaba theme. It monitors: - caller id - display status - display call time. Platforms: *nix

HermesAP is a package containing Orinoco driver patches and tertiary firmware extraction/upload utilities to switch Hermes/Airport WaveLAN cards to BSS master (AccessPoint) mode under Linux. The package contains next components: patched orinoco-0.13c driver for o BSS master support (with WDS)... Platforms: *nix

Linux on the WRT54G is a mini-distribution for the router and access point Linksys wrt54g 802.11b/g It includes basic tools such as sh, syslog, telnetd, httpd (with cgi-bin support), vi, snort, mount, insmod, rmmod, top, grep, find, nfs modules, etc. The installation script runs in about 20... Platforms: *nix

After sporadic reports of data loss and corruption with FireWire 800 devices operating with the new Mac OS X 10.3 "Panther" operating system, Apple Computer made an official press release to indicate this problem has been traced to Oxford Semiconductor's 922 Firmware used by nearly all FireWire... Platforms: Mac

Apple Computers has discovered a serious issue with their "Panther" operating system in the operation of FireWire storage products employing the the Oxford 922 FireWire 800 chipset (firmware version 1.02), a problem serious enough that it can result in loss of all data on your FireWire drive.... Platforms: Mac