Torque

Torque Network Library is a robust, secure, easy to use cross-platform C++ networking API designed for high performance simulations and games. The network architecture in TNL under the hood of some of the best internet multiplayer action games to date.

y = units(x,'unit1','unit2') - Converts x from physical unit1 to unit2example: units(1,'in','mm') = 25.4The following units are supported:Acceleration: m/s^2, cm/s^2, mm/s^2, ft/s^2, in/s^2, GAngle: rad, deg, revArea: km^2, m^2, cm^2, mm^2, ym^2 (square-micrometer), sq-mile, sq-yd, sq-ft, sq-in,...

This submission includes the files used in the webinar delivered March 1st, 2007, and titled "Optimizing Motion Control Systems Featuring a Four-Bar Linkage".It demonstrates the use of Inverse-Dynamics implemented through the tool SimMechanics. The ability to anticipate actuator torque...


Platforms: Matlab

Inductance of the armature L = 0,1H, resistance of the armature R = 2 W, voltage U = 110 V, load torque mz = 0,02 Nm, momentof inertia J = 0,1 kg/m2 and electro-mechanical constant of the motor k = 0,3 Vs. Create it asseparate block (subsystem) with one input (voltage) and two outputs (angular...


Platforms: Matlab

A web-based monitor for PBS-based clusters (e.g. OpenPBS and Torque). It provides an overview of node usage, running jobs, and active users. It is built on the pbs-python libraries.


Platforms: Windows, Mac, Linux

The electromagnetic torque motors are widely used in electrohydraulic servovalves. They serve to convert the control current into a proportional torque. For more details about the steady state and transient response calculation, please refer to my book:Galal Rabie, Fluid Power Engineering,...


Platforms: Matlab

This is a online account system for use with the Torque Game Engine. It is designed to work on many database platforms. It works both in-game, using the GET method to pass information, and with an online account administration system.


Platforms: PHP

The advantages of vector control provide variety of control choices in the PMSM drives. The simplest control strategy is the Zero d_axis current control (Constant Torque Operation) which is implemented in this model. The transient responses of torque, speed and 3-phase motor current are simulated.


Platforms: Matlab

This code proposes genetic algorithm (GA) to optimize the point-to-point trajectory planning for a 3-link (redundant) robotarm. The objective function for the proposed GA is to minimizing traveling time and space, while not exceeding a maximumpre-defined torque, without collision with any...


Platforms: Matlab

The algorithm considers the effect of ends of travel, dry friction passive forces and external load.The computing algorithm is intended to describe the dynamic behavior of a mechanical component or assembly characterized by mechanical ends of travel, under the action of dry friction passive...


Platforms: Matlab

When measurement data for bicycle speed, pedal torque and traction force are available for a given PEDal ELectric Cycle (=pedelec or E-PAC: electrically power-assisted bicycle) this graphical user interface analyses the performance of this pedelec.The GUI is to be used together with the LS-SVM...


Platforms: Matlab

The electromagnetic torque motors are widely used in electrohydraulic servovalves. They serve to convert the control current into a proportional torque. For more details about the steady state and transient response calculation, please refer to my book:M Galal Rabie, Fluid Power Engineering,...


Platforms: Matlab

Hi Arnaud,here is on of the files I mentioned.I drive a pump with the simelectronics induction motor. when it comes to measuring the torque, the power output totally changes.i did not connect the torque measurement tool yet. so you can run the model first, and then connect the tool and see the...


Platforms: Matlab

Purpose of this program is studying a not standard section subject to torsional stress. Not standard means the section is not included in engineering Handbooks. It can be studied with FEM analysis with commercial softwares, but sometimes this can become very rough.Fortunatly Prandtl theory of...


Platforms: Matlab

Torque and flux are controlled independantly,with closed loop of observed currents and speed.Controllers are ordinary PI controller,with modified controlling parameters.For your convenience in simulation or design process of motor controllers.


Platforms: Matlab

This software will calculate all the constraint reactions of your shaft. Then you have the plot of blending moment of the forces that you have loaded and the plot of the torque screw.This is based on the statically determinate model of a simple supported shaft.The software is useful because you...


Platforms: Matlab

Texen is a general purpose text generating utility. It is capable of producing almost any sort of text output. Driven by Ant, essentially an Ant Task, Texen uses a control template, an optional set of worker templates, and control context to govern the generated output. Although TexenTask can be...


Platforms: Mac

This code is licensed under the GPL PBS/TORQUE is a job scheduling system that is used on many high performance computing clusters. The LPBS package provides tools to run PBS job scripts on a local workstation. Specifically, LPBS provides the lqsub command that takes the same options as the PBS...


Platforms: *nix

Welcome to Torque 3D, the most easy-to-use game creation platform available. Architected from the ground up for maximum flexibility and performance across a wide range of hardware and built upon the Frontline award-winning Torque Game Engine Advanced, Torque 3D comes equipped with a full suite of...


Platforms: Mac

wind power generation based on Permanent Magnet Synchronous Generator2-mass model based wind turbine is used in this system for providing mechanical torque/input to Permanent Magnet Synchronous Generator. 3-phase power generated from this system, changing wind velocity is also presented in this...


Platforms: Matlab