Temperature Interval

wmacpi_temp is a Window Maker dock application that reads the temperature file in /proc/acpi in ACPI enabled kernels. In short, it displays the temperature of the processor, updated every minute (in Celsius or Fahrenheit). Installation: 1. make 2. su 3. make install (to put it in... Platforms: *nix

wmacpimon is an ACPI Temperature Monitor, a Windowmaker dockapp that monitors the temperature and Speedstep features in new ACPI-based systems. It supports batteries, automatic shutdown when the power is low, and multiple screens. Whats New in This Release: - All system was rewritten -... Platforms: *nix

X Hardware Monitor is a hardware monitor that shows indicators for temperature, voltage, fan speed etc, of a running system with a graphical panel. The default configuration allows to monitor up to 3 temperatures, 3 fan speeds and 6 voltages. This tool is more particularly adequate for... Platforms: *nix

hardmon project can monitor hardware indicators for temperature, voltage, fan speed etc... of a running system with a graphical panel. The default configuration allows to monitor up to 3 temperatures, 3 fan speeds and 6 voltages. This tool is more particularly adequate for bi-processor systems.... Platforms: *nix

Gatotray project is a colorful tray icon to watch over CPU status including usage, frequency and temperature.. Platforms: *nix

Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. Requires ACPI. Platforms: Mac

Kima is a KDE kicker applet that shows the current CPU temperature and frequency. Make sure you have enabled the temperature ACPI kernel module (thermal.ko). Installation: run configure ./configure --prefix=$(kde-config --prefix) build the sources make install the applet (with... Platforms: *nix

wmalms monitors data obtained from a sensor chip: temperature, fan speed, voltage. It can be used as a dockable/swallowed applet with Window Maker, BlackBox and clones (incl. FluxBox), or any window manager that supports swallowing, including gnome, kde(kpanel)-1, fvwm and clones.... Platforms: *nix

Zapping VBI library provides routines to read from raw Vertical Blanking Interval capture devices, to demodulate raw to sliced VBI data, and to interpret the data of several popular services. Basically, it offers all the functionality needed by a VBI application except for the UI.. Platforms: *nix

EmiFreq applet is an daemon that shows/control the CPU frequency and temperature thanks to the cpufreq sysfs kernel interface. The emifreqd daemon enables the applet to change the cpu speed. The GUI is very clean, intuitive fast access to frequency change (with HIG help). Modelled over the... Platforms: *nix

lm-monitor is a daemon that run sensors at a defined interval (15 seconds by default) and checks the output If a sensor value has gone outside the defined limit since the last reading, an email message is sent to one or more administrators, alerting them about the condition so they can take... Platforms: *nix

The Basic melting temperature widget allows to calculate the melting temperature of a nucleic acid sequence. Platforms: Mac

Turn a bunch of average photos into stunning images with various actions and effects in a few clicks! Make color corrections to photos by adjust brightness, contrast, saturation, temperature, and tint. Improve visual quality of images through sharpening, noise reduction, and auto-white-balance... Platforms: Windows

Tabata timer is a timer made for tabata interval training. Tabata timer is easy to use and free of charge. Tabata timer is programmed with java so you need java to run it. Tabata timer works with winxp, win7, win2000, linux and mac osx. Platforms: Windows, Mac, *nix, Java

AutoFEM Thermal Analysis provides a calculation of the temperature behaviour of products under the action of sources of heat and radiation. Thermal analysis can be used independently to calculate the temperature and thermal field of the design, as well as in conjunction with static analysis to... Platforms: Windows

DarkMaster is a simple, useful and easy-to-use piece of software that allows astrophotographers to quickly match dark frames to light frames based on temperature. All you have to do is input the directories to the light and dark images. The output is a DeepSkyStacker file list. When working... Platforms: Windows

Detect and display hard disk drive and SSD health and temperature information without starting the installed operating system. The software can be started from a suitable bootable floppy, CD, pendrive, memory card or USB hard disk to diagnose IDE/SATA hard disks and SSD devices in the system... Platforms: MS-DOS, Other

By using the Linux console edition of Hard Disk Sentinel, it is possible to examine the temperature and health information (and more) of IDE, S-ATA (SATA II also), SCSI and USB hard disks connected to motherboard or external controller cards. The user must be root to use this software or start it... Platforms: Linux, Linux Console

iFanAutoControl is an application to automatic control the fans of the computer and regulate the temperature of MacBook and MacBookPro Apple Computers based on Intel processors and Windows OS. Platforms: Windows

Thermod Digital is a simple utility that will help you monitor temperature of any AMD Family 10h and higher CPU. Thermod Digital uses the undocumented AMD thermal interface based on System Management Bus to access CPU on-die thermal diode. CPU temperature can be displayed both in Celsius and... Platforms: Windows