Stepper Motor Circuit

Constructional details of various sub-modelsfor the induction motor are given and their implementation in SIMULINK is outlined. Direct-onlinestarting of a 7.5-kW induction motor is studied using the simulation model developed.

Dynamic simulation of a transformer start of an asynchronous motor. The transformer tap can be chosen in the model. The switching from the transformer tap to the full voltage is done manually with a switch in the model. Visible are stator current, speed, motor torque and load torque

The RLC Circuit with Function Generator model simulates a resistor, capacitor and inductor in series with either a sinusoidal or square wave voltage source and plots the time dependence of the voltage drops across each element. Users can vary the resistance, capacitance, inductance and source...


Platforms: Mac

Stepper Motor ToolBox gather several funtion to create velocity profiles and render simulations using stepper motor dinamics. The stepper model was developed in simulink and solved using ODEs.


Platforms: Matlab

This Plugin is designed to manage motor sport races and championships and allow users to predict the outcome of the races. Points are awarded based on users' predictions and the actual finishing order of the race.Most motor sport competition types are supported. Basically any event that involves...


Platforms: PHP

Permanent Magnet synchronous motor was modeled with the help of vector control technique and it was also made sensorless based on sliding model observer (SMO). controller parameters are given after tuning it with conventional gradient descent method.


Platforms: Matlab

Speed control of DC motor using Hysteresis pulse width modulation.This model simulates the speed and current control of DC motor using the Hysteresis pulse width modulation. The current band is defined and relay ensures that that the current remains between the upper and lower limit i.e....


Platforms: Matlab

Here we have modelled a five-phase induction motor and we have applied DTC control technique to the machine


Platforms: Matlab

Yasmina's Quest is an open source game (and motor) mix of graphical point-and-click adventure and text adventure written in PHP and DHTML (javascript, CSS and HTML) that uses mouse and keyboard optionally.Tested under BeOS, Linux, *BSD, Windows, etc.


Platforms: PHP

Arduino (www.arduino.cc) is a low-cost open-source electronics prototyping platform.MATLAB Support Package for Arduino (also referred to as "ArduinoIO Package") allows you to communicate with an Arduino Uno or Duemilanove over a serial port. It consists of a MATLAB API on the host computer and a...


Platforms: Matlab

Inductance of the armature L = 0,1H, resistance of the armature R = 2 W, voltage U = 110 V, load torque mz = 0,02 Nm, momentof inertia J = 0,1 kg/m2 and electro-mechanical constant of the motor k = 0,3 Vs. Create it asseparate block (subsystem) with one input (voltage) and two outputs (angular...


Platforms: Matlab

Simulation of a model of DC motor, driven by constant input signal that approximates a pulse-width modulated(PWM) signal and look at the current and rotational motion at the motor output using Simulink. It uses SimElectronics and Simscape too.


Platforms: Matlab

The goal of this assignment was to develop a Speed control system for a DC motor. Various control methods were to be employed, both open loop and closed loop. All control methodologies are implemented using MATLAB GUI. The important feature of the system is the auto-calibrate function which...


Platforms: Matlab

Scooter screensaver by Budget Scooters. Pictures of scooters to use as your screensaver. Pictures for free use that you can download and start using today. Pictures include scooter action shots, Vespa scooters and other scooter pictures.


Platforms: Windows

The most popular induction motor models is the Kraused-deOaos model. This model is implemented from the equations derived from the equivalent circuit in Krause's model. To simulate the model in Simulink, the model has to be initialized first. A file containing all the machine parameters has to be...


Platforms: Matlab

The rt-stepper program along with it's USB-to-parallel dongle is a real time stepper motor CNC gcode virtual machine. rt-stepper works with existing CNC controllers that only support a parallel port. rt-stepper is a small ncurses terminal program that can run on any OS that supports libusb. Both...


Platforms: *nix

DC motor Control using lag compensation and PIDTo customize this code you just need to:1- Change the values of DC motor constants2- Determine settling time, PO% and SSE and Change the zeros of lag compensation3- Tune the gains of PID controller


Platforms: Matlab

Program given here computes the discrete transfer function of a DC motor (Example taken in this case) using pseudo inverse technique. The input and output data for any single input single output system can be used to find out the discrete transfer function of that system.


Platforms: Matlab

After fault restriking voltage of Circuit breaker is demonstrated


Platforms: Matlab

The advantages of vector control provide variety of control choices in the PMSM drives. The simplest control strategy is the Zero d_axis current control (Constant Torque Operation) which is implemented in this model. The transient responses of torque, speed and 3-phase motor current are simulated.


Platforms: Matlab