Soil Moisture Sensors
Newhall is a Java implementation of Franklin Newhall's model for soil moisture regime determination. This implementation stems directly from the Wambeke BASIC version of the Newhall simulation model, which was a BASIC reimplementation of the original COBOL version. The model functions by taking...
Platforms: Mac
License: Freeware | Size: 10.24 KB | Download (42): Newhall Download |
GNOME Panel Applet can display system temperatures, fan speeds and voltage readings from hardware sensors under Linux. Supported interfaces: - ACPI thermal zones, via the Linux kernel ACPI modules - Linux kernel i2c modules (for kernel 2.6). - lm_sensors and i2c packages (for kernel 2.4) -...
Platforms: *nix
License: Freeware | Size: 153.6 KB | Download (104): GNOME Sensors Applet Download |
Sensors is a SuperKaramba theme for motherboard sensors monitoring. This is my first upload on to KDE-look its a very basic sensor Karamba theme. Since I like to know what my computer is doing all the time. Sensors theme uses LM-sensors and this must be installed before this theme will work....
Platforms: *nix
License: Freeware | Size: 61.44 KB | Download (115): Sensors Download |
TechMon+Amarok without sensors (temp) edited version of TechMon theme.. TechMon+Amarok without sensors (temp) KDE-Look.org Community Portal for KDE Themes Wallpapers Icons Sounds Screenshots Schemes Skins Skinz Screensavers Splash Screens K-Jofol IceWM Kaiman News Forum GUI Polls Links Downloads...
Platforms: *nix
License: Freeware | Size: 122.88 KB | Download (91): TechMon+Amarok without sensors (temp) Download |
Xfce 4 Sensors Plugin is a hardware sensors plugin for the panel. For now, it only works on Linux and requires libsensors to display your mainboard sensors and fan speeds. Furthermore, it supports hddtemp to surveil your hard disk’s temperature values. Source code and Debian packages are...
Platforms: *nix
License: Freeware | Size: 286.72 KB | Download (115): Xfce 4 Sensors Plugin Download |
Xfce4-Sensors-Plugin is a plugin for the Xfce 4 panel that shows selected sensors values..
Platforms: *nix
License: Freeware | Size: 378.88 KB | Download (87): Xfce4-Sensors-Plugin Download |
Moisture Analysis is a Java-based software that can be used for the moisture analysis of a building envelope by the steady-state diffusion model. This is done according to DS/EN ISO 13788.
The input is material data for each layer of the building envelope and 12 sets of exterior conditions...
Platforms: Windows
License: Freeware | Download (499): Moisture Analysis Download |
LM-Sensors Monitor is a monitor for gkrellm. It monitor your sensors using the lm-sensors' modules. You can monitor all your sensors and for temperature monitor you can choose F or C
Platforms: *nix
License: Freeware | Size: 10.24 KB | Download (35): LM-Sensors Monitor For Gkrellm Download |
NovoLIQ geotechnical software is a flexible and comprehensive soil liquefaction analysis software covering 10 different analysis methods using the following field tests:
-Standard Penetration Test (SPT)
-Becker Penetration Test (BPT)
-Shear Wave Velocity (Vs)
Soil resistance (CRR) is...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $525.00 USD | Size: 24.53 MB | Download (65): Soil Liquefaction Analysis Software - NovoLIQ Download |
Hardware sensors monitor utilizes sensor chips on smart motherboards to track
system and CPU temperatures, voltages and cooling fans.
Also, program monitors most graphics cards GPU temperature and HDDs S.M.A.R.T. attributes.
By quickly catching an overheated computer, you can prevent...
Platforms: Windows
License: Shareware | Cost: $25.00 USD | Size: 1.93 MB | Download (2453): Hardware sensors monitor Download |
NovoSPT is designed for analyzing Standard Penetration Test (SPT/ DCPT) blow counts and correlating N to soil engineering properties using about 285 formulas.
The following features are incorporated:
- All corrections factors including rod length, sampling method and borehole diameter,...
Platforms: Windows, iPhone,iPod
License: Shareware | Cost: $580.00 USD | Size: 11.55 MB | Download (136): NovoSPT Download |
NovoCPT is designed for processing CPT files and calculating soil parameters such as friction angle, relative density, unit weight, fines content, shear wave velocity, Gmax, N60, clay sensitivity, OCR, undrained shear strength, soil behavior type (SBT), Ic, at-rest earth pressure coefficient Ko...
Platforms: Windows
License: Shareware | Cost: $0.00 USD | Size: 10.52 MB | Download (160): NovoCPT Download |
Xtemp is a SuperKaramba theme that shows temperatures of 3 sensors in your motherboard. This theme is configured for MSI k7n2 (Nforce2), if your motherboard is not Nforce2 edit the theme files and change the sensors. **Remember** **This theme needs lm_sensors installed and correctly...
Platforms: *nix
License: Freeware | Size: 54.27 KB | Download (93): Xtemp Download |
lm-monitor is a daemon that run sensors at a defined interval (15 seconds by default) and checks the output If a sensor value has gone outside the defined limit since the last reading, an email message is sent to one or more administrators, alerting them about the condition so they can take...
Platforms: *nix
License: Freeware | Size: 21.5 KB | Download (92): lm-monitor Download |
openLISEM was specially built as an accessible and easy-to-use spatial soil erosion model.
The program can be used to assess the soil conservation measures and scientific analysis of small to medium catchments.
Platforms: Windows
License: Freeware | Download (420): openLISEM Download |
NovoLiq is designed as a very flexible and comprehensive soil liquefaction analysis software which can compare more than 10 different methods. NovoLiq covers the following field tests: -Standard Penetration Test (SPT) -Becker Penetration Test (BPT) -Shear Wave Velocity (Vs) Soil resistance (CRR)...
Platforms: Windows
License: Shareware | Cost: $0.00 USD | Size: 8.19 MB | Download (55): Liquefaction Analysis Program (NovoLiq) Download |
The Oak product family of Toradex combines the cost and performance advantage of highly integrated precision sensors and multi purpose generic interfaces with the ease-of-use of a standard and low cost USB connection. Connect up to 110 Oak USB Sensors to a single USB port of your computer or...
Platforms: Windows, Windows 7
License: Freeware | Size: 7.88 MB | Download (46): Oak Studio Installer Download |
XSensors project is designed to display all the related information from motherboard sensors. This information is gathered via lm_sensors, the software drivers that retrieves the sensor information from the hardware.
Platforms: *nix
License: Freeware | Size: 215.04 KB | Download (44): XSensors Download |
ARDev is an augmented reality toolkit to assist robot developers in debugging complex robot sensors.
Platforms: *nix
License: Shareware | Cost: $0.00 USD | Size: 624.64 KB | Download (36): ARDev Download |
ClockScreenlet with sensors and alarm function for your appointments or shutdown your pc :D New functions: middle-click show the sensors, mouse-scroll change the screen brigthness.
Platforms: *nix
License: Freeware | Size: 645.12 KB | Download (37): ClockScreenlet Download |