Parallel Port Timer Program

Parallel port powerSwitch project is a TCP/IP server to control a parallel port power switch. pp_powerSwitch is a TCP/IP based server, which controls a power switching device through the parallel port. Besides Java, I used a bit C to handle the parallel port I/O. I use it for controling...

Welcome to PPEP, the Parallel Port Eprom Programmer. This programmer is composed of three parts: A hardware part which connects to a standard parallel port, A GNU/Linux driver which controls the programmer, A program front-end which gives a friendly control of the programmer.

Description:This program allows you to view and control parallel port on hardware level.Features:* It is possible to change each bit in Data Register, Status Register and Control Register. * It is possible to view and control when 5 Volts exist on the pins of parallel port DB-25 connector.


Platforms: Windows

This modified driver fixes an issue with reading from the control pins on some parallel port hardware. You may need to change the mode in the BIOS to SPP (or compatibility mode).The DLL is in the ReleaseWin32 directory of the ZIP-file.


Platforms: Matlab

This is a very basic software for Data Acquisition using Parallel Port. You can both input and outputdata using Parallel Port.I need your valuable suggestions.


Platforms: Matlab

SoftCollection Parallel Port Library For .NET lets you a full control over the Parallel Port of your PC. You can set separately an electrical potential, 0v or 5v, on each writable pin, and you can get an electrical potential from each readable pin of the Parallel Port of your PC.


Platforms: Windows

Multiple targets can be synchronized using the parallel port available on most PCd-deOaos. Designating one model as the master to generate an interrupt source on the parallel port, single or multiple slaves can be driven and synchronized by this signal. This demo includes a library that contains...


Platforms: Matlab

kparalleleport is a program for programmers who wish to use the parallel port. The project makes it possible to view the values registered or read on the parallel port.. Site du projet paralleleport, kparelleleport


Platforms: *nix

pcibx can be used to control the Catalyst PCIBX32-X and PCIBX64-X PCI Extender card through the parallel port interface. This software is run on the host-system. The host-system is the machine, which controlls the Extender. The client-system is the machine with the controller in its PCI slot....


Platforms: *nix

Device::ParallelPort is a Parallel Port Driver for Perl. SYNOPSIS my $port = Device::ParallelPort->new(); $port->set_bit(3,1); print $port->get_bit(3) . "n"; print ord($port->get_byte(0)) . "n"; $port->set_byte(0, chr(255)); A parallel port driver module. This module provides an API to...


Platforms: *nix

ScopePar turns a PC into a multi-channel oscilloscope module utilizing the parallel port, the user interface to which is SeriCon on other PC. If you have an old PC, boot it by dos to run ScopePar and control it by SeriCon on your GUI PC through serial port. The free trial version of SeriCon is...


Platforms: MS-DOS

PulsePar turns a PC into a multi-channel pulse generator utilizing the parallel port. The period, duty and phase of each channel are adjustable so as to be used in PWM systems as well as in testing servo and stepper (stepping) motors. If you have an old PC, boot it by dos to run PulsePar and...


Platforms: MS-DOS

LPT Manager is a program that allows you to control the parallel port. It shows the current state of every single I/O line of the port with LEDs or, optionally, with the corresponding registries' values. You can also interactively change the status of output lines, with a mouse clic or writing...


Platforms: *nix

Intuwiz CNC can convert any personal computer with LPT (parallel) port into computer numerical control (CNC) system.Program can generate step/direction or direct phase outputs using RS-274D G-code (Gcode).Application allows to use E-Stop, limit switches and backlash compensation.Intuwiz CNC has...


Platforms: Windows

ActiveX OCX to connect two PCs using a LapLink parallel cable ( Turbo cable ) , the connection don't requires any other software installed in order to work , it can transfer files in any Windows based machine , just plug the cable , start the application and the connection is ready to be...


Platforms: Windows

A special timer program, developed for speed reading training. Counts up or down (1 hour max), with customizable metronome tick (emphasized or not, variable speed), plus extra sound every x seconds and when timer has run off. All settings are saved.


Platforms: Windows

NAmpel is a daemon for visualizing the state of a network using Nagios and a set of status LEDs attached to a parallel port. NAmpel is the Nagios Ampel Project, started by me to keep a closer eye on my net. Nagios is an open source host, service and network monitoring program. Ampel is the...


Platforms: *nix

Ledctl is a program written in C that uses the Parallel Port Interface(PPI) of the FreeBSD kernel to drive LEDs connected to the parallel port of a computer. It can be used within scripts to visually notify users for new mail, high processor load, etc.


Platforms: Mac, BSD, Linux

What is the Parallel Portscanner This tool lets you scan a remote computer for available services on TCP ports. Normal port scanners try ports one by one. This port scanner checks about 200 ports at a time, making it 200 times faster than an ordinary port scanner. This application is a good...


Platforms: Mac

parashell is a tool that allows you to control the parallel port (input and output) using simple command line arguments. Due to its easy interface all you need to know is the parallel port's address (ie., 0x378, 0x3bc, etc.) and a little bit about binary.


Platforms: *nix