Nissan Maxima Knock Sensor

This function quickly finds local peaks or valleys (local extrema) in a noisy vector using a user defined magnitude threshold to determine if each peak is significantly larger (or smaller) than the data around it. The problem with the strictly derivative based peak finding algorithms is that if...

The proposed algorithm is based on nonlinear derivatives to automatically select the best edge information. This algorithm can replace the classical derivative with the following benefits:- univocal edge localization for synthetic and real images- noise reduction with no regularization: the noise...

This is a very simple function to find the local maximum in any dimensional array. As simple as it is it still gives nice results.I use the imdilate() function as a maximum operation and then compare the data to the result.The function receives three parameters:the data, a vector defining the...


Platforms: Matlab

NXTway-GS is a self-balancing two-wheeled robot built with LEGO Mindstorms NXT and a Hitechnic gyro sensor. This demo presents sample models and documents describe the following contents.How to Build NXTway-GSMathematical Dynamics Model of NXTway-GSController Design for Balance and Drive...


Platforms: Matlab

In many practical signal processing problems, the objective is to estimate from measurements a set of constant parameters upon which the received signals depend.For example, high-resolution direction-of-arrival (DOA) estimation is important in many sensor systems such as radar, sonar, electronic...


Platforms: Matlab

We would like to rise water temperature with a heater. Oulet temperature must be equal to the set point temperature (80dlT-C). Proportional (P), Proportional-Integral (PI) and Proportional-Integral-Derivative (PID) control are used and the respective results are compared. Inlet water temperature...


Platforms: Matlab

We would like to rise water temperature with a heater. Oulet temperature must be equal to the set point temperature (80dlT-C). Proportional-Integral-Derivative (PID) control is used. Inlet water temperature is equal to 20dlT-C. Water flow is equal to 10 m3/hr. Tank volume is equal to 100 m3....


Platforms: Matlab

Function target_image_gen use Vx, Vy and Vz to create a movie simulation of a targets aproach. I edit this demo to have differents movies to test a target tracking system I made in simulink.Function target_gen creates a target (11,11) based on value x.If x


Platforms: Matlab

These programs were developped to exploit luminance or BRDF data from the EZ-Contrast instrument developped by Eldim. They are applicable to any measurment done using a ccd sensor.The developped library includes:- maxima research- Polar zenithal plot of ccd sections- Polar azimutal plot of ccd...


Platforms: Matlab

When a person writes across a board, he/she positions his/her arm in a comfortable writing configuration by moving his/her body rather than reaching out the arm.The same situation happens in many case such as people transporting a heavy object cooperatively. Therefore, when a mobile manipulator...


Platforms: Matlab

Identifies the National Instruments NI-USB6008 DAQ and collects the data from the sensor through the DAQ. In this example, it collects 10 seconds worth of data from a pressure transducer and outputs the mean for each time the function is called.These functions were used in an Instrumentation lab...


Platforms: Matlab

As a coursework, we are required to price a double barriers knock-in binary put option. We used finite difference method in 24 ways and multinomial lattice in 12 ways. We also implemented analytic and Markov chain method. At the end, we compared these four methods and Monte Carlo method.In this...


Platforms: Matlab

1. Find the edge image using the Canny edge detector.2. Extract edges (curves) from the edge image: 2a. fill gaps if they are within a range and select long edges, 2b. find T-junctions and mark them as T-corners. 2c. obtain the `status' of each selected edge ${Gamma}$ as either `loop' or...


Platforms: Matlab

[xm,ym,xx,yy]=Seekpeaks(fun,x,y,y_tol,Nsteps,varargin)Searches the maxima of the function 'fun', which is an object such as produced by inline or by a m-function. y=fun(x,P1,P2,...), where P1, P2,...are additional parameters used in the function 'fun' and are given in 'varargin' in Seekpeaks as...


Platforms: Matlab

Vernier SensorDAQ (www.vernier.com/sensordaq) is a USB data-acquisition interface. It can be used to gather data from Vernier sensors (www.vernier.com/sensors) and also includes terminals for analog and digital I/O.This support package extends the capabilites of Data Acquisition Toolbox (R2011b...


Platforms: Matlab

This is the starter kit for the Spring 2010 MATLAB Programming Contest, April 28-May 5 2010. For more information see the rules:My Webpage


Platforms: Matlab

This is a MATLABdlT« instrument driver for use with v2.0 of the Instrument Control Toolboxd-OC?D? and higher. It supports the Rohde & SchwarzdlT« NRT-Zxx sensors for the NRT power reflection meter.It is a MATLAB VXIplug&play instrument driver that requires the Rohde & Schwarz rsnrtz...


Platforms: Matlab

This model extends the "f14" model which is a demo in Simulink to include a GUI and simple sensor failure handling.MathWorks products required to run the model:MATLABSimulinkStateflowTo use model:1. Open aerogaugef14.mdl. The GUI, "aerogaugegui", will open automatically.2. Click "Start Sim" on...


Platforms: Matlab

Eventually, the goal of this project is to create a module that gives you a phpBB-esque looking/acting forum.For now, it's of little use unless you are a developer and want to help. If so, feel free to knock off an issue or two!


Platforms: PHP

It's your job to take flight and knock out more than 100 doomsday devices that have been planted around the world. Travel to each destination on the map and eliminate chains of marbles by strategically matching colors in sets of three. Knock out cleverly-placed stationary marbles to block...


Platforms: Mac