Linux Virtual Usb Interface

i2c-tiny-usb is a open source/open hardware project. Attach any I2C client chip (thermo sensors, AD converter, displays, relais driver, ...) to your PC via USB ... quick, easy and cheap! Drivers for Linux, Windows and MacOS available. The i2c-tiny-usb project is an open source/open hardware...

There is a number of the equipment controlled through a serial port from a PC or a terminal. Also there is a lot of the technologies in the market allowing to operate remotely the consecutive devices through the network TCP/IP. These solutions contain, both software and the hardware. Our company...

Linux Bandwidth Monitor (bwmon) is yet another utility that measures bandwidth utiliazation per interface basis. It is coded in C and takes advantage of POSIX thread and curses library. It runs only on Linux systems since the utility reads /proc/net/dev and /proc/uptime. The utility reads...


Platforms: *nix

If you want to share USB devices over network and Internet use USB@nywhere. Our software supports many kinds of USB devices such as printers, scanners, flash-memory, Human input devices etc. USB@nywhere meets such needs as: - Need to get remote access to USB equipment - Need to share USB...


Platforms: Windows

FlexiHub is a software-as-a-service for redirecting all types of USB devices over the network and accessing remote USB devices over the Internet. It is a subdivision of Electronic Team, Inc. and has remained the flagship product since it was presented in 2014. FlexiHub is a convenient software...


Platforms: Tested on Ubuntu 18.04, 20.04, CentOS 8

Userful Multiplier is a multiseat Linux desktop virtualization solution that enables a single computer to support up to 10 independent users at the same time, each with their own monitor, keyboard, and mouse by using USB multiseat devices, or extra video cards, and virtualizing the X server. This...


Platforms: *nix

Linux Layer7 Switchings main goal is to provide a performant framework for Layer7 switching. Layer7 switching is driving a low-level engine using networking design to speed-up forwarding of data stream. Implementation in this project is split into a userspace daemon and a low-level kernelspace...


Platforms: *nix

K8055 project is a sample program to use the Velleman K8055 interface Board on Linux. k8055 is a sample program to use the Velleman K8055 interface board on Linux. The USB K8055 interface board has 5 digital input channels, 8 digital output channels, two analogue inputs, and two analogue...


Platforms: *nix

Linux-HA provides a heartbeat and IP address takeover functions for a high-availability Linux cluster. The basic goal of the High Availability Linux project is to: Provide a high-availability (clustering) solution for Linux which promotes reliability, availability, and serviceability (RAS)...


Platforms: *nix

Userful MultiSeat is a multiseat Linux desktop virtualization solution that enables a single computer to support up to 11 independent users at the same time, each with their own monitor, keyboard, and mouse by using USB multiseat devices, and virtualizing the X server. This approach offers the...


Platforms: *nix

USB device manufacturers need to support the Universal Serial Bus (USB) specification. The USB interface is implemented in two levels: The lower level of the USB protocol is implemented via a Serial Interface Engine (SIE). The higher layer of the protocol is implemented via the device firmware....


Platforms: Windows, Linux

This free software product allows capturing traffic between USB device driver and USB device, while being transparent for the device. High efficiency and the amount of information Simple USB Logger provides allows to analyze the behavior of any USB device. Thanks to crash dump analysis function,...


Platforms: Windows

pam_usb provides hardware authentication for Linux using ordinary USB Flash Drives. It works with any application supporting PAM, such as su, any login manager (GDM, KDM), etc. The pam_usb package contains: A PAM Module - Password-less authentication. Use your USB stick for authentication,...


Platforms: *nix, C/C++,

The Pan-Galactic Gargantuan Gargle Brain (PG3B) is an open source hardware and software platform to control and interact with an XBox 360 from a home computer, adapt your favorite input device, and develop exciting new input devices. The PG3B hardware allows full control of the XBox 360 buttons,...


Platforms: Mac

The classic game of Battleships against the computer. Uses character-cell graphics with a visual point-and-shoot interface. If you're using an xterm under Linux the mouse will work.


Platforms: *nix

BibleTime is a completely free Bible study program. The program's user interface is built with Qt framework, which makes it run on several operating systems including Linux, Windows, FreeBSD and Mac OS X. The software uses the SWORD programming library to work with over 200 free Bible texts,...


Platforms: *nix

Get Started with Virtualization Risk-Free Start Achieving the Benefits of Virtualization The free VMware Server is based upon VMware’s proven virtualization technology. With this robust yet easy to use software you can: * Accelerate server provisioning by building a virtual machine once and...


Platforms: Windows, Linux

A free Squeak virtual machine CocoaSqueak is a free Squeak virtual machine for Mac OS X, built with a Cocoa interface.


Platforms: Mac

GWT Virtual Application System can centralize different applications such as ERP, OA, CRM, PDM, CAD etc and deploy on server side. The clients on different Operation System or in the Internet Explorer can safely and quickly access application remotely that made by authorization of the server,...


Platforms: Windows, Mac, *nix, Windows 7, Windows Server, Android, Other,iPhone

WebCBQ Bandwidth Manager is written in PHP and iss a Web interface that let you create, edit and remove rules for cbq.init script. It makes the network traffic management easy under Linux platform. This interface lets a knowless user to manage the clients bandwidth. Whats New in This...


Platforms: *nix