Giroux

A 50 kW, 380 V, 50 Hz load is connected to a 25 kV, 60 Hz grid through a AC-DC-AC power supply. This power supply consists of two voltage source converters, VSC1 and VSC2, connected through a DC link.VSC1 connected on 60Hz grid is operating as a rectifier. It regulates the DC link voltage at 750V... Platforms: Matlab

The following two models are included in the package:d-deD? PVarray_Grid_IncCondReg_det.mdl is a detailed model of a 100-kW array connected to a 25-kV grid via a DC-DC boost converter and a three-phase three-level Voltage Source Converter (VSC). Maximum Power Point Tracking (MPPT) is implemented... Platforms: Matlab

A SimPowerSystems model is used to calculate switching and conduction losses in a buck converter.A 12-kW buck converter is implemented by a half-bridge IGBT detailed model. Based on the thermal characteristics of the selected IGBT module, both switching and conduction losses are calculated.... Platforms: Matlab

SimPowerSystems(SPS) and Simscape are used to calculate losses in a 3-phase, 3-level inverter.From a +/- 1800 volts DC source, a 400-kW, 3-phase 3-level inverter delivers variable power to adistribution power system. The inverter output is connected to the 25-kV, 40 MVA, 50-Hz systemthrough a... Platforms: Matlab