Ethernet

MZL and Novatech TrafficStatistic shows accumulated bandwidth usage of a network interface like ethernet, DSL or PPP in tray. It generates IP traffic statistics IPDR data and the user can generate reports on his top bandwidth consumers cut by host and service. Reports allow to identify and to... Platforms: Windows

The Haxxio UDP Serial Port Redirector is the missing link between devices that speak UDP on your network and are thus "connected" to your PC, via an Ethernet port (specifically UDP over IP) and Windows applications on the PC that can only talk to a serial port. Most applications for the... Platforms: Windows

MZL & Novatech TrafficStatistic shows accumulated bandwidth usage of a network interface like ethernet, DSL or PPP, in the tray. It generates IP traffic statistics IPDR data and the user can generate reports on top bandwidth consumers by host and service. Reports allow you to identify and analyze... Platforms: Windows

LAN Tornado agent is the very useful, easy-to-use and low cost network testing software. LAN Tornado is a tool for measure Ethernet based networks metrics. LAN Tornado agent is very applicable software for testing switches, routers, servers and other network devices. LAN Tornado Agent receive... Platforms: Windows

PPPOEd is PPP-over-Ethernet implementation. To install follow these commands run ./Install_pppoe Follow the prompts For more details on the prompts etc, look at the file QUICK-INSTALL-example The man pages on pppoed are also helpful for documentation: man pppoed Whats New in This... Platforms: *nix

VLAN is an implementation of the 802.1Q VLAN protocol for Linux. VLAN allows one to have Virtual LANs on a single ethernet cable, giving you the ability to segregate LANs efficiently. VLAN should support up to 4094 vlan interfaces per ethernet device.. Platforms: *nix

dslKonnector is a Kommander script to start, stop, restart DSL connection (ppp over ethernet), using tools "pon dsl-provider" and “poff dsl-provider". To use it you will need to have superuser privileges. dslKonnector does not configure dsl connection, so you will have to setup it using tool... Platforms: *nix

Fli4l is a single floppy distribution, Linux-based ISDN, DSL and Ethernet-Router. You can build it from an old 486 based pc with 16 megabyte memory, which is more than adequate for this purpose. The necessary boot-disk can be built under Unix, Linux or Windows. You dont need any specific... Platforms: *nix

Laptops which use dynamic IP address assignment via DHCP have the problem that the boot process is much longer when no wire is connected to the Ethernet card. This is because the startup scripts have to wait for the DHCP request to time out. ethwireck can detect if the physical layer of the... Platforms: *nix

EtherApe is a graphical network monitor for Unix modeled after etherman. Featuring link layer, IP and TCP modes, it displays network activity graphically. Hosts and links change in size with traffic. Color coded protocols display. It supports Ethernet, FDDI, Token Ring, ISDN, PPP, SLIP and WLAN... Platforms: Mac

FREESCO (stands for FREE ciSCO) is a free replacement for commercial routers supporting up to 10 ethernet/arcnet/token_ring/arlan network cards and up to 10 modems.. Platforms: *nix

netEasy project allows easy and fast configuration of ethernet interfaces in Linux. With netEasy, its possible to change network parameters such as IP address, netmask, and gateway in an easy, fast, and interactive way. The use of a DHCP server is also possible. The settings may also be saved... Platforms: *nix

SIB (Simple IPX Bridge) is able to tunnel IPX and IP frames received by your Ethernet device via UDP over the Internet. It is able to put the interface it listens on to promiscous mode, so all frames (not only broadcasts, and frames for the tunneling server) can be received. Actually every... Platforms: *nix

iTattle is a network administration tool that can get information on your wireless AirPort Extreme, built-in Ethernet and System. Platforms: Mac

The Managed Switch Port Mapping tool communicates with a managed ethernet switch using SNMPv1/v2c and maps the physical port connections to MAC and IP addresses of the attached devices. Capable of mapping many different brands and models of managed switches. Saves technicians time mapping out... Platforms: Windows

IENetP or Industrial Ethernet Network Performance for long, is a handy test tool specially designed to help you test your network. Basically this test tool determines the network performance of industrial devices using standardized metrics and tests. for WindowsNT, 2K, XP, 2003, Vista, 7 Platforms: Windows, 2K, XP, 2003, Windows Vista, 7

Hide your MAC Address from hackers, your ISP, WiFi networks, online games, and more! Anyone with the right tools can track your Internet activity if they know your MAC Address. Now you can conceal your real MAC address and bypass all kinds MAC address with the handy tool "Change MAC Address".... Platforms: Windows, Windows 8, Windows 7, Windows Server

Resident Tray System software for barcode scanner or other serial data capture devices that have a standard RS232 or Ethernet interface. The program will redirect serial and or TCP inputs from COM ports to keyboard buffer on your computer, as if the data were directly typed in from the keyboard.... Platforms: Windows

Resident Tray System software for barcode scanner or other serial data capture devices that have a standard RS232 serial interface / file and or TCP Ethernet connection. The program will redirect file/serial/TCP Port and keyboard buffer to any direction. Features include: Debugger, run in System... Platforms: Windows

ipMIDI will allow you to route MIDI over your Ethernet network, using its ports to send and receive MIDI data between computers connected to your LAN. For example, if you have a music studio with several computers connected via MIDI interfaces and MIDI cables, ipMIDI will replace them all. Any... Platforms: Mac