Din Spline Standards
The calculation is designed for a geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Application is developed in MS Excel, is multi-language, supports...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $31.00 USD | Size: 2.53 MB | Download (36): MITCalc Bolted connection Download |
The calculation is designed for geometric designs and strength checks of shaped couplings of shafts with hubs. The application provides solutions for the following tasks:
- Design of a coupling with parallel side keys.
- Design of a coupling with Woodruff's keys.
- Design of a coupling with...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $25.00 USD | Size: 3.29 MB | Download (54): MITCalc Shaft connection Download |
Geo::Spline is a Perl module to calculate geographic locations between GPS fixes. SYNOPSIS use Geo::Spline; my $p0={time=>1160449100.67, #seconds lat=>39.197807, #degrees lon=>-77.263510, #degrees speed=>31.124, #m/s heading=>144.8300}; #degrees clockwise from North my...
Platforms: *nix
License: Freeware | Size: 20.48 KB | Download (141): Geo::Spline Download |
This is free software that adds several spline and linear interpolation functions to Microsoft Excel. It is simple to use because the new functions work just like all other existing Excel functions. Spline functions include cubic spline, bessel spline, and 'OneWay' spline (which is a monotonic...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Freeware | Size: 1.39 MB | Download (134): SRS1 Cubic Spline for Excel Download |
Computes the H-infinity optimal causal filter (indirect B-spline filter) for the cubic spline.[INPUT]d: delay[OUTPUT]psi: the optimal filter psi(z) in a TF objectgopt: optimal valueThis file is based on the following paper:M. Nagahara and Y. Yamamoto,H-infinity optimal approxmation for causal...
Platforms: Matlab
License: Freeware | Size: 10 KB | Download (46): H-infinity optimal causal IIR inverse filter for the cubic spline Download |
Piecewise cubic spline interpolation and approximated calculation of first and second derivative at the interpolation point.
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (58): Piecewise spline interpolation Download |
This function uses vectorised methods to determine the locations of maxima and minima where they exist within a piecewise spline fit. The matlab built-in functions for determining the maxima and minima, by differentiating the pp spline and finding its zeros (using the Spline toolbox), are quite...
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (42): Local maxima and minima of a pp spline Download |
Matlab class that creates an interactive, closed spline which can be used as a region of interest. Can be used to select regions in an image
Platforms: PHP
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (43): Interactive Spline Region of Interest Download |
Din's Curse is a single player and co-op multiplayer action RPG with 141 class combinations, infinite number of dynamically generated towns, real consequences, and a dynamic, evolving world. Din, champion of the gods, has cursed you into a second life of service because you selfishly squandered...
Platforms: Mac
License: Demo | Cost: $19.99 USD | Size: 9.01 MB | Download (38): Din's Curse Download |
The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $25.00 USD | Size: 2.89 MB | Download (51): MITCalc Compression Springs Download |
The calculation is designed for geometrical design and complex strength check of shafts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Simple definition of installed shafts, including hollow ones.
-...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $24.00 USD | Size: 2.11 MB | Download (59): MITCalc Shafts Calculation Download |
The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Selection of the type of belt with a suitable output power....
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $18.00 USD | Size: 1.88 MB | Download (50): MITCalc Timing Belts Calculation Download |
Geometric design and strength check of bevel gear with with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of straight, helical and curved toothing.
-...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $31.00 USD | Size: 3.33 MB | Download (60): MITCalc Bevel Gear Calculation Download |
The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $25.00 USD | Size: 3.14 MB | Download (52): MITCalc Tension Springs Download |
The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following tasks:
- Design of force fits, possibly shrink fits.
-...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $25.00 USD | Size: 2.35 MB | Download (48): MITCalc Force shaft connection Download |
The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Calculation for 2 or 3 pulleys.
- Automatic design of a...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $18.00 USD | Size: 2.42 MB | Download (45): MITCalc V-Belts Calculation Download |
The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and...
Platforms: Windows, Windows 8, Windows 7, Windows Server
License: Shareware | Cost: $25.00 USD | Size: 3.09 MB | Download (46): MITCalc Torsion Springs Download |
This small calculator takes you weigth, height, age, skiing level and ski boot sole length and estimates the required DIN setting for your ski bindings. DIN setting is the setting that determines the amount of pressure required to release the binding. It has and must be set for both the toe piece...
Platforms: Windows
License: Freeware | Size: 525 KB | Download (191): DIN Settings Calculator Download |
Freeware program to calculate the proper DIN value setup for your alpine slalom ski bindings.
Platforms: Windows
License: Freeware | Size: 352 KB | Download (602): DIN Setup for Bindings Download |
Parts can generate macros for drawing 2D CAD parts according to DIN and CSN standards, for different CAD systems, in various formats, or in dxf format. The program can generate views of more than 250 kinds of parts or profiles.
Platforms: Windows, *nix
License: Freeware | Size: 5 MB | Download (496): Parts Download |