Delco Remy Voltage Regulator

It simulates three phase simple PWM-180 degree conduction based inverter. Frequency and output voltage can be changed using slider gains block used.

This is a simple program written so the equations look like classical matrix equations and it solves the voltage out of the standard current driven loop filter. This is intended to be used in some future PLL analysis program, but it outlines the way to set up the equations, and solve them. There...

Hello,Can anyone help me debug my "Single Phase Inverter" model?I have it semi-made, i have pwm features in there, but i just can't get it to work.I need to achieve a Pure Sine Wave, at the output.And also at variable frequencies. I have a transformer attached at the output too, to achieve...


Platforms: Matlab

This zip file contains three functions: dbm_to_vpp which converts dBm to a peak-to-peak voltage; dbmean which calculates the average or mean decibel value of two or more decibel quantities; and nextpow10 which returns the next higher power of 10 for a specified number.


Platforms: Matlab

This package includes a configurable Simulink model for three different types of DC-DC converters (Buck, Boost and Buck-Boost converters) with a PWM PI controller. The example provided shows a case to boost voltage from 5 volts to 25 volts. It can be used to learn DC-DC converters and their...


Platforms: Matlab

The model simulates space vector based three phase inverter with the state space model of thefilter. The model parameters such as frequency, switching frequency, load parameters, voltage, modulation index and filter A,B,C,D parameters.


Platforms: Matlab

A simple simulation Model for DC DC step-down buck converter, the model allows measurments of output current/voltage, capacitor current, diode current. Ripples in each measurment can be observed very accurately using the scope


Platforms: Matlab

The model simulates three phase three level diode clamped inverter using sinosoidal pulse width modulation. FFT analysis of output voltage is performed using power GUI. Switching frequency and output frequency can be adjusted using the initilzing callback function in the model properties.


Platforms: Matlab

Backward/ forward sweep algorithm for three-phase load-flow analysis of radial distribution systems. In the backward sweep, Kirchhoff's Current Law and Kirchhoff's Voltage Law are used to calculate the upstream bus voltage of each line or a transformer branch. In the forward sweep, the voltage at...


Platforms: Matlab

The model simulates a three phase Sinusoidal PWM rectifier. Applied Voltage, switching frequency and sampling factor can be changed from the model properties block.


Platforms: Matlab

PV panel is modeled from the equivalent circuit of PV cells in series and parallel. Each panel is designed with Short circuit current 1 Amp and Open circuit voltage (36x0.54 =) 19.44 Volts at 1000w/sqm, Enter Nos. of such panel to configure in series Ns and sets of panels in parallel Np (Pmp=13.7...


Platforms: Matlab

Given a set of customer requirements, design a suitable DC/DC converter.Project includes full derivation of control transfer functions, simulink model.Design Spec:Voltage input200-650 VDCVoltage output28VDC, regulatedFull load power300WMinimums load20% of full loadRipple voltage?100mV at full...


Platforms: Matlab

This model simulates three phase inverter. Sawtooth waveform has been used as the carrier. Triplen of level 1/6 of reference were injected in the reference to utilize the maximum DC link voltage. The output voltage range increases by injecting the triplen harmonics in the reference provided that...


Platforms: Matlab

The model simulates buck converter using different approaches. Parameters can be change from the initializing callback function in the model properties. First circuit implements buck using a MOSFET and diode, second implements using two MOSFETs and third implements using the model equation. Power...


Platforms: Matlab

The system of automatic control of vapor pressure in the boiler with the PI-regulator, taking into account the level of delay and non-linear element.


Platforms: Matlab

This software has been realized by Bret Fortenberry at the CNS Technology Lab at Boston University (http://techlab.bu.edu/). A model to show the properties of EPSPs and IPSPs in the postsynaptic cell. The model allows a user to adjust the number of EPSP and IPSP inputs, the rise and fall times...


Platforms: Matlab

This is a Simulink Model Code of a guinea-pig ventricular action potential published byFaber GM, Silva J, Livshitz L, Rudy Y. Kinetic properties of the cardiac L-type Ca2+ channel and its role in myocyte electrophysiology: a theoretical investigation.Biophys J. 2007 92:1522-1543.The action...


Platforms: Matlab

This project aims to demonstrate speed control of aDC series motor. It involves the use of armature voltage control,to control the speed of the motor. The speed of the motor iscontrolled for a typical speed profile of a washing machine. ThePID controller of the motor is optimized for a good...


Platforms: Matlab

The model simulates buck converter using different approaches. Parameters can be change from the initializing callback function in the model properties. First circuit implements buck using a MOSFET and diode, second implements using two MOSFETs and third implements using the model equation. Power...


Platforms: Matlab

A MATLAB toolbox for the design of discrete-time H2- and Hinf-optimal preview controllers within a generalised regulator framework.Latest code can be downloaded via subversion. See:http://code.google.com/p/preview-control-toolbox/The core algorithms were developed during the course of Andrew...


Platforms: Matlab