Broadband Signal Amplifier

MATLAB is a software environment and programming language with over 1,000,000 users and is used to generate arbitrary and standard waveforms, configure and control instruments, build automated test applications, and analyze and visualize data from other instruments. MATLAB only supports...

This entry provides functions and examples allowing you to create Simulink.TsArray and Simulink.TimeSeries objects from a script or the MATLAB command line. A Simulink.TsArray object can be used as input data for a bus signal input in Simulink.Note: These functions contain **UNDOCUMENTED**...

This ZIP-file contains the demonstration files used during the "Analog and Mixed-Signal Circuit Modeling with Simulink Product Family" webinar presented on June 22, 2004.


Platforms: Matlab

random_band is the main program and it outputs a test signal which has a constant level. The instanatenous frequency varies randomly within the specified Nth octave band range.The program outputs three plots: time record of the instantaneous frequency, time record of the instantaneous level, and...


Platforms: Matlab

This program operates as a signal spectrum analyzer and a distortion meter at the same time. It can accept any numerical data representing few cycles of a signal. The data do not need to be equally separated. At least ten data points per cycle are needed. Higher number of data points will of...


Platforms: Matlab

toobox_signal - signal processing related functions.This toolbox contains functions related to image processing, including* images loading and generation.* filtering and blurring functions.* anisotropic and spacially variant filters.* non-linear filtering (median, LIC, bilateral).* High Dynamic...


Platforms: Matlab

A signal object (an object of class "signal") is a set of data in an one dimensional array, combined with information about its sample rate, starting time and other useful infos. A number of methods makes it easy to generate and modify signals."signal" is used and tested for considerable time in...


Platforms: Matlab

We present some basic programs written for the MATLAB environment for the analysis of optical and acoustic data and for signal processing. These programs exploit novel concept derived from a theoretical physics approach. These programs can be easily customized by the expert user, but they...


Platforms: Matlab

Frequency response signal analyzer for linear and non-linear control loops and dynamic systems. Simulink model. Sine sweep based similar to dynamic signal analyzers for physical systems. User specifies: freq limits, freq decrement, averages, phase criteria for moving to next frequency, start...


Platforms: Matlab

Simulation of Absolute-Value Output Circuit is carried out with operational amplifier,diodes and other components available in Simscape 2.1 version. Regardless of the polarity of the input signal, the output of the circuit is always positive going and this is displayed in the scopes.


Platforms: Matlab

random_band is the main program and it outputs a test signal which has a constant level. The instanatenous frequency varies randomly within the specified Nth octave band range.The program outputs three plots: time record of the instantaneous frequency, time record of the instantaneous level, and...


Platforms: Matlab

A very easy symbolic method for reduction of block diagrams or signal flow graphs with Matlab is presented. The method can be applied to every kind of diagram and it is possible to obtain in one stage all transfer functions for a given input. The method is validated with some examples, including...


Platforms: Matlab

%DVBS2Constellation Signal Constellations taken from ETSI EN 302 307% [CONSTELLATION, BITMAPPING] = DVBS2Constellation(MODSCHEME,GAMMA)% returns the constellation points and the bit mapping specified in the DVB-S2% Standard ETSI EN 302 307. The output vector CONSTELLATION contains the%...


Platforms: Matlab

Tapers start and end samples of a given signal for a fade-in and fade-out effect. Fade-in and fade-out durations can be independently controlled. Custom tapering window can be specified also.


Platforms: Matlab

the m-file helps you o understand the generatio,transmission and reception of an ofdm signal, and also shows the effect of the channel noise and the HPA on the ofdm signal.


Platforms: Matlab

The m-file investigates the effects of high power amplifier and thechannel noise on the OFDM signal and then introduces clipping asa PAPR reduction method to reduce the HPA effect.


Platforms: Matlab

This function Calculates Power Spectral Density of signal vector X using Welch's averaged periodogram method.X is divided into sections, then windowed by the WINDOW parameter.The magnitude squared of the length NFFT DFTs of the sections are averaged to form Pxx. Pxx is length NFFT/2+1 for NFFT...


Platforms: Matlab

The "Dynamic Signal Analyzer 34411A" program turns the following Agilent DMMs into Dynamic signal analyzers: 34411A, 34410A, and the L4411A.The program sets up the DMMs as digitizers, fetches the readings, and performs an FFT on the readings. The FFT is plotted with dBV on the y axis and...


Platforms: Matlab

We build a signal limiting function that is specified by IP2 and IP3. We construct a time domain function that can be used in s system to generate non-linearity. IP2 and IP3 can be specified in a specific way, and the function is modified so it performs as specified. This function can be placed...


Platforms: Matlab

MR Noise is a broadband noise reduction processor. It distinguishes itself by being both great sounding and incredibly easy to use. Like most noise reduction systems, MR noise works in the frequency domain, and requires that the noise spectrum be learned before noise reduction can commence. If...


Platforms: Mac