Cobex 0.2.13

Cobex is a small implementation of the OBEX communication protocol for slow serial cables. Its primary use is to communicate with cell phones such as the Sony Ericsson T610, T310, and T300. Currently the project consists of a couple of headerfiles and some sourcefiles, which results in a small executable that can be used to send files to a SonyEricsson T3x0, and probably other SonyEricsson models. Fetching files is NOT implemented. In fact, its not even implemented (or at least not working) in the phone... Its not a full-scale, foolproof, ironclad implementation of Obex. Check out OpenObex instead. They even have a v1.0! Install the required libraries . If they are not installed in the usual places, you will have to modify the Makefile. Come on, a configure script with all its fluff would be several times larger than this entire project. When ezV24 and expat are in place, do a simple "make" and the project should build. Should you need to change the baudrate, you have to edit the files and recompile. It is set to 115200 in cobex_serial.h baud by default. Cobex does handle port locking using lockfiles. Unfortunately, f.ex. Fedora Core 3 does not, at least not very well. So, therefore port locking is turned of by default. You can enable it by editing the Makefile, and removing the hashmark infront of the LOCKSERIAL definition. You can use it with following commands: cobex_get cobex_ls cobex_put cobex_rm. Get Cable OBEX at SourceForge.net. Fast, secure and free downloads from the largest Open Source applications and software directory. This is a small implementation of the communication protocol OBEX over a slow, serial cable. It's primary use is to communicate with cellphones, more specifically the SonyEricsson brand phones.

Requirements:	No special requirements
Platforms:	Linux
Keyword:	Cobex,  Communication,  Communication Protocol,  Implementation,  Networking,  Protocol,  Slow,  Small,  System
Users rating:	0/10