Download Shareware and Freeware Software for Windows, Linux, Macintosh, PDA

line Home  |  About Us  |  Link To Us  |  FAQ  |  Contact

Serving Software Downloads in 976 Categories, Downloaded 30.066.254 Times

Network Pipemeter 0.40

  Date Added: June 25, 2010  |  Visits: 665

Network Pipemeter

Report Broken Link
Printer Friendly Version


Product Homepage
Download (73 downloads)

Network Pipemeter is a tool for measuring available bandwidth between hosts. nepim is also useful to generate network traffic for testing purposes. nepim operates in client/server mode, is able to handle multiple parallel traffic streams, reports periodic partial statistics along the testing, and supports IPv6. nepim has been tested under Linux, Solaris and FreeBSD, though it should work under other platforms as well. If you manage to build nepim for different systems, please send the patch. - nepim is useful to assess the throughput at the transport layer (TCP or UDP) as seen by applications. - nepim runs single-threaded and should impose very light burden on your CPU. Unless, of course, your testing hosts have relatively high network bandwidth compared to low CPU power. - One single server can service multiple clients simultaneously. - As of nepim 0.11, one single client can interact simultaneously with multiple servers. For instance, suppose you want to test, from a single client, two remote servers, one located at 10.0.0.1,2000 and another at 192.168.0.1,3000: - nepim -c 10.0.0.1,2000/192.168.0.1,3000 - The server listens to both TCP and UDP sockets. The client by default uses TCP sockets. Use the "-u" client option to switch the client operation to UDP. - By default, only the server sends traffic towards the client. Use the "-s" client option to reverse the behavior, then only the client will send traffic. Use the "-d" client option to make both client and server to send traffic. - Use the "-r" client option to establish an upper bit rate limit. Without a rate limiting option, nepim sends as fast as possible. See also "-R" below. Please notice the rate is specified in bps (bits per seconds); for instance, the following example states a rate limit of 100,000 bps (100 Kbps): - nepim -c 10.0.0.1 -r 100000 - Use the "-R" client option to establish an upper "packet" rate limit (outbound rate limit for transport layer segments). Without a rate limiting option, nepim sends as fast as possible. If both "-r" and "-R" are given, nepim limits the sending rate at the lower of those bounds. - Use the "-n" client option to run multiple parallel traffic streams. - Use the "-b" server option to make the server to listen on specific local addresses. - Use the "-6" option to disable IPv6 support. Whats New in This Release: - Support for randomizing the UDP destination address/port has been added in order to put stress on routers with on-demand (dynamic) forwarding table caches..

Requirements: No special requirements
Platforms: Linux
Keyword: Client Network Network Pipemeter Networking Option Pipemeter Rate Server System Tcp Traffic Udp
Users rating: 0/10

License: Freeware Size: 38.91 KB
NETWORK PIPEMETER RELATED
Networking Tools  -  ETrace 1.1
ETrace is a configurable static port network tracing tool, similar to traceroute, but supporting ICMP, TCP, UDP and other IP protocols. Usage: etrace [ -BbCcnv ] [ -p profile ] [ -F config ] [ -i interface ] [ -I icmp-type ] [ -T port ] [ -U...
47.1 KB  
Network Monitors  -  Capsa 2.0
Capsa is a TCP/IP Network Monitor and Analyzer program based on Windows system. With capsa, you can Monitor IP packets over the local network and you local host. Unlike many simple Monitors (or packet decoders) Capsa decode not just packets but...
1024 B  
MP3 Tools  -  TCP Port Forwarding 1.0.2
Tcp Port Forwarding tool allows to capture and redirect TCP traffic that flows through a particular port. Tcp Port Forwarding software also can work as network bridge for redirecting TCP network traffic from one network card to another one. This...
539.91 KB  
Networking Tools  -  PPTP Client 1.7.1
PPTP Client allows you to connect to a PPTP server from a Linux box. It sets up a PPTP connection, after which the PPP daemon establishes a PPP link over that PPTP call. So youd like to run a PPTP tunnel from your Linux, FreeBSD, NetBSD or...
58.37 KB  
Windows Software  -  PowerTCP SSL Sockets for .NET 1.0.3
Use the .NET components included with PowerTCP Sockets for .NET to create any type of network application. These basic network building blocks contain everything needed to create a network application of any level of complexity. Use the Tcp...
2.94 MB  
Puzzles  -  Online Cardgame System 0.9.0
Online Cardgame System project is a client-server system for playing card games over the net. OCS is a client-server cardgame system, similar to those found at Yahoo! Games and elsewhere. The server is portable and has been tested under Linux,...
 
Networking Tools  -  OpenPlay 2.2r2
OpenPlay is a cross-platform network abstraction layer. OpenPlay is designed to simplify the task of creating programs which communicate across multiple computers and has been used in dozens of commercial products. Includes NetSprocket API...
3.7 MB  
Networking Tools  -  Firepass 1.1.2a
Firepass - is a tunneling tool, allowing to bypass firewall restrictions and encapsulate data flows inside legal ones to use HTTP POST requests. TCP or UDP based protocols may be tunneled with Firepass. For now, both - client and server parts are...
24.58 KB  
Networking Tools  -  Network Inventory Advisor for Mac 1.1.2573
Network Inventory Advisor for Mac is an agentless remote Mac inventory software. It discovers all network OS X nodes by IP or network names, scans them for technical data from System Profiler and compiles great-looking customizable reports. Get a...
3.95 MB  
File Synchronizers  -  AOMEI PXE Boot Free 1.5
If you have a lot of computers within LAN, but they may have no CD-ROM drive and USB ports. If you need to perform system recovery or system installation for multiple computers and it's impossible to insert CD or flash drive into these computers...
12.52 MB  
NEW DOWNLOADS IN NETWORK & INTERNET, NETWORKING TOOLS
Network & Internet  -  Free WiFi Hotspot 3.3.1
Free WiFi Hotspot is a super easy solution to turn your laptop or notebook into a portable Wi-Fi hotspot, wirelessly sharing your internet connections like DSL, Cable, Bluetooth, Mobile Broadband Card, Dial-Up, etc. through the built-in wireless...
1.04 MB  
Network & Internet  -  Easy Uploads 1.8
Easy uploads is a file storage media streaming application designed by Filestreamers that allows you to upload, store, and stream your files from their virtually unlimited file storage server. Easy Uploads can backup,share, and stream your files...
615.97 KB  
Network & Internet  -  IPv6 CARE 3.2b
IPv6 CARE, "IPv6 Compliant Automatic Runtime Environment", is a Linux tool able to patch ipv6-agnostic programs on-the-fly ('patch' mode). It can also generate a diagnosis about the IPv6 compliance of an application ('check' mode).
409.6 KB  
Network & Internet  -  PacketFence ZEN 3.1.0
PacketFence is a fully supported, trusted, Free and Open Source network access control (NAC) system. Boosting an impressive feature set including a captive-portal for registration and remediation, centralized wired and wireless management, 802.1X...
1024 MB  
Network & Internet  -  django-dbstorage 1.3
A Django file storage backend for files in the database.
10.24 KB  
Networking Tools  -  gvrpad 0.1
gvrpad is a daemon that makes GVRP announcements of all VLAN interfaces on a FreeBSD system. GVRP is the GARP VLAN Registration Protocol, defined in IEEE 802.1Q (VLANS); GARP is the Generic Attribute Registration Protocol, defined in 802.1D...
15.36 KB  
Networking Tools  -  Cheops 0.61
Cheops is an Open Source Network User Interface. It is designed to be the network equivalent of a swiss-army knife, unifying your network utilities. Cheops is for the network what a file manager is for your filesystem..
317.44 KB  
Networking Tools  -  dynacc 0.5.0
Dynacc aims to be a Pakage which gives you control other your Internet Connection. It runs a linux router/host which provides MASQ services and HTTP proxying for a LAN. It gives you the Power to define users/groups which are allowed to make...
122.88 KB  
Networking Tools  -  ssh tunnel on demand 1.0
ssh tunnel on demand provides a script that creates an SSH tunnel on demand. ssh tunnel on demand is a script that makes it possible for a user to create an SSH tunnel to a server and connect to it without needing an account on the box or any...
13.31 KB  
Networking Tools  -  strongSwan 4.1.5
strongSwan is an OpenSource IPsec implementation for the Linux operating system. strongSwan is an OpenSource IPsec implementation for the Linux operating system. In order to have a stable IPsec platform to base our future extensions of the X.509...
1.7 MB