Converting a 3D logical array into an STL surface mesh 1.0

USAGE===== >> CONVERT_voxels_to_stl(STLname,gridDATA,gridX,gridY,gridZ,'ascii')converts the voxelised object contained within the 3D logical array into an STL surface mesh, which is saved to the ascii file . The x,y,z axes for are defined by , and . INPUT PARAMETERS================ STLname - string - Filename of the STL file.gridINPUT - 3D logical array of size (P,Q,R) - The voxelised object (1 => Inside the object, 0 => Outside the object)gridX - A 1xP array - List of the X axis coordinates.gridY - A 1xQ array - List of the Y axis coordinates.gridZ - A 1xR array - List of the Z axis coordinates.STLformat - string (optional) - STL file format: 'binary' or 'ascii'. EXAMPLE======= For an example, run the following script:>> CONVERT_voxels_to_stl_example NOTES===== - This code does not apply any smoothing. The stl mesh will be exactly the same geometry as the original voxelised object.

Requirements:	No special requirements
Platforms:	Matlab
Keyword:	3d3d3d3d3d3d3d,  Binary,  Coordinates,  Format,  Gridx,  Gridy,  Gridz,  Optional,  Stlformat
Users rating:	0/10