Wlan Router

KFli4L is a control panel for the Linux floppy ISDN router, fli4l. It is made for viewing the status and controlling the operation of the router through a window with several tabs..

MRTG-eth-probe provides a probe for the Multi Router Traffic Grapher, generating statistics for network devices that do not support the SNMP protocol. It reads interface stats from /proc/net/dev (or some other file you configure), and generates an output readable for MRTG by parsing the file....

The goal of the Linux WLAN project is to develop a complete, standards based, wireless LAN system using the GNU/Linux operating system. The linux-wlan package is a linux device driver and subsystem package that is intended to provide the full range of IEEE 802.11 MAC management capabilities for...


Platforms: *nix

Nelisys project is Open Source Web-based Management System, to manage and monitor system and network including Router, Switch, Wi-Fi Access Point, Server, Networking services, etc. There are performance and fault management function.. nelisys


Platforms: *nix

KWlaninfo provides some information about wlan interfaces. Its a kicker applet and so you must start it with a right click on a empty space in the kicker panel and then add it. At time it only works proper, if the wlan interface is set to "managed" mode. It provides some information about...


Platforms: *nix

KWifiSelector is a KDE tool to display all available wireless networks (WLAN). For each of them, the parameters (such as IP configuration and WEP keys) can be configured. KWifiSelector also allows the user to connect to and disconnect from a selected network. Whats New in This Release: -...


Platforms: *nix

Linksys Syslog captures the snmp trap messages from a Linksys router and saves these to syslog. This daemon is very small robust and it does its job. Ive gotten this router from a customer/partner DH computers to look at the VPN capabilities. Eventhough these broadband routers are small and...


Platforms: *nix

MRTG short from Multi Router Traffic Grapher is a tool to monitor the traffic load on network-links. Routers are only the beginning. MRTG is being used to graph all sorts of network devices as well as everything else from weather data to vending machines. MRTG is written in perl and works on...


Platforms: *nix

OSPFviz project is a visualization software that displays OSPF router information on dynamically routed networks and draws a network map as image. This can be very helpful when searching for asymmetrical routes, when designing load balancing or just for documentational purpose. Works on SNMP...


Platforms: *nix

floppyfw project is a router with the advanced firewall-capabilities in Linux that fits on one single floppy disc..


Platforms: *nix

VPN Router lets you define a list of remote IP addresses to which all traffic should be routed through the VPN tunnel. Technically speaking: It adds static routes to your routing table as soon as you establish a VPN connection.Here's an example: Your local network is 192.168.111.X and wires your...


Platforms: Mac

HiRouter free routing software is a stand-along operating system based on the Linux x86 kernel, it can be installed on a PC and will turn it into a router with all the necessary features- routing, firewall, VPN server , QoS and more.These features cater to the network management of some groups ,...


Platforms: Other

CommView Remote Agent for WiFi is an application for remote WLAN traffic monitoring. It allows CommView for WiFi users to capture network traffic on any computer where Remote Agent for WiFi is running, regardless of the computer's physical location. CommView Remote Agent for WiFi enables you to...


Platforms: Windows, XP, 2003, Windows Vista, XPX64, 2008, 7

RusRoute is a powerful router and firewall, Internet gateway for Windows, it is the ideal solution for making Internet gateway for local area network (LAN) of any firm, encountering and restriction of the traffic of users, protection against of network attacks with functions of NAT, redirect,...


Platforms: Windows

This application shows how WLAN-based location can work based on OpenWLANMap project. Directly after start up this software tries to evaluate the current users position and displays it within a map. The position is shown by a red circle. The radius of this circle is as smaller as more exact the...


Platforms: Windows

Simple Port Forwarding works with WebPages and not directly with your router. Making it a safe program to use. Its no different than using Firefox, IE or any other browser to setup port forwarding yourself. The program works by automating the process for you. So whether you don't understand how...


Platforms: Windows

Simple Port Forwarding works with WebPages and not directly with your router. Making it a safe program to use. Its no different than using Firefox, IE or any other browser to setup port forwarding yourself. The program works by automating the process for you. So whether you don't understand how...


Platforms: Windows

UPnP Port Works ("UPnPPW") is an all purpose platform independent application that aids router management. Its framework, pioneered under C is fully compliant with Microsoft's UPnP technology. Furthermore, this independent solution consumes very little system resources, and requires no...


Platforms: Windows

Most modern routers allow you to backup the configuration of the router into a file, and then restore the configuration from the file when it's needed. The backup file of the router usually contains important data like your ISP user name/password, the login password of the router, and wireless...


Platforms: Windows

This is a script that gets data from a fli4l router and display it using a flash movie. Feel free to download it, use it and modify it!


Platforms: Windows, Mac, *nix, Flash, BSD Solaris