Usb To Parallel Port

Parallel port powerSwitch project is a TCP/IP server to control a parallel port power switch. pp_powerSwitch is a TCP/IP based server, which controls a power switching device through the parallel port. Besides Java, I used a bit C to handle the parallel port I/O. I use it for controling...

Welcome to PPEP, the Parallel Port Eprom Programmer. This programmer is composed of three parts: A hardware part which connects to a standard parallel port, A GNU/Linux driver which controls the programmer, A program front-end which gives a friendly control of the programmer.

Description:This program allows you to view and control parallel port on hardware level.Features:* It is possible to change each bit in Data Register, Status Register and Control Register. * It is possible to view and control when 5 Volts exist on the pins of parallel port DB-25 connector.


Platforms: Windows

pcibx can be used to control the Catalyst PCIBX32-X and PCIBX64-X PCI Extender card through the parallel port interface. This software is run on the host-system. The host-system is the machine, which controlls the Extender. The client-system is the machine with the controller in its PCI slot....


Platforms: *nix

The rt-stepper program along with it's USB-to-parallel dongle is a real time stepper motor CNC gcode virtual machine. rt-stepper works with existing CNC controllers that only support a parallel port. rt-stepper is a small ncurses terminal program that can run on any OS that supports libusb. Both...


Platforms: *nix

Device::ParallelPort is a Parallel Port Driver for Perl. SYNOPSIS my $port = Device::ParallelPort->new(); $port->set_bit(3,1); print $port->get_bit(3) . "n"; print ord($port->get_byte(0)) . "n"; $port->set_byte(0, chr(255)); A parallel port driver module. This module provides an API to...


Platforms: *nix

Kaweth is a driver for Kawasaki KL5KUSB101 based USB to Ethernet bridges. This is written for the Netgear EA101.. Get Kawasaki USB to Ethernet Driver at SourceForge.net. Fast, secure and free downloads from the largest Open Source applications and software directory. A driver for USB devices that...


Platforms: *nix

ScopePar turns a PC into a multi-channel oscilloscope module utilizing the parallel port, the user interface to which is SeriCon on other PC. If you have an old PC, boot it by dos to run ScopePar and control it by SeriCon on your GUI PC through serial port. The free trial version of SeriCon is...


Platforms: MS-DOS

PulsePar turns a PC into a multi-channel pulse generator utilizing the parallel port. The period, duty and phase of each channel are adjustable so as to be used in PWM systems as well as in testing servo and stepper (stepping) motors. If you have an old PC, boot it by dos to run PulsePar and...


Platforms: MS-DOS

parashell is a tool that allows you to control the parallel port (input and output) using simple command line arguments. Due to its easy interface all you need to know is the parallel port's address (ie., 0x378, 0x3bc, etc.) and a little bit about binary.


Platforms: *nix

NAmpel is a daemon for visualizing the state of a network using Nagios and a set of status LEDs attached to a parallel port. NAmpel is the Nagios Ampel Project, started by me to keep a closer eye on my net. Nagios is an open source host, service and network monitoring program. Ampel is the...


Platforms: *nix

kparalleleport is a program for programmers who wish to use the parallel port. The project makes it possible to view the values registered or read on the parallel port.. Site du projet paralleleport, kparelleleport


Platforms: *nix

The Port Scan Attack Detector (psad) is a collection of three system daemons that are designed to work with the Linux Netfilter firewalling code to detect port scans and other suspect traffic. Port Scan Attack Detector project features a set of highly configurable danger thresholds (with...


Platforms: *nix

Palace is a visualization plugin for XMMS that allows musical control of a light show connected to a PC-style parallel port. Eventually it will become a generic "real-world" device control infrastructure.


Platforms: *nix

LPT Manager is a program that allows you to control the parallel port. It shows the current state of every single I/O line of the port with LEDs or, optionally, with the corresponding registries' values. You can also interactively change the status of output lines, with a mouse clic or writing...


Platforms: *nix

Inkblot project reports on the remaining ink levels in a wide variety of USB and Parallel connected printers. Inkblot provides an ink status notification, and can provide a more detailed dialog showing the level of ink remaining to your printer. Inkblot uses libinklevel to detect your printer...


Platforms: *nix

FunkyMD Suite aims to provide Linux users with tools to title minidiscs using a portable Sony minidisc recorder and a self-made interface for the parallel port. The project is currently run by Thomas Perl and was inspired by the great MDCOM interface (see links below for more information).. A...


Platforms: *nix

Spark Loader is a boot loader for AVR microcontrollers, it is used for programming flash and EEPROM using a serial link (USB to Serial converters can be used) between your computer and the microcontroller through any free COM (or USB) port. Spark Loader consists of two parts: 1. On - chip boot...


Platforms: Windows

Ledctl is a program written in C that uses the Parallel Port Interface(PPI) of the FreeBSD kernel to drive LEDs connected to the parallel port of a computer. It can be used within scripts to visually notify users for new mail, high processor load, etc.


Platforms: Mac, BSD, Linux

Palace is a nifty visualization plugin for XMMS. Palace plugin works by reading the Fourier frequency analysis given by XMMS, and activating particular pins on the parallel port based on the frequency analysis and configuration options. Palace is based on the XPLSISNJASP software project. For...


Platforms: *nix