Texas Instruments Cdc Ethernet Adapter Driver

The Linux TLAN driver supports various Ethernet adapters based on the ThunderLAN chip which was co-developed by Compaq and Texas Instruments.

TAP provides packet reception and transmission for user-space programs. It can be viewed as a simple Ethernet device, which instead of receiving packets from a physical medium, receives them from a user-space program and instead of sending packets via physical media, writes them to the user-space...

Used on cellular phones to filter outbackground noise. Measure the signal to noise ratio of an audio input in realtime. Pass speech but give silence where the input is noise (hiss, snap crackle and pop).Includes a tutorial on how to use statistics (correlation coefficient) to calculate the signal...


Platforms: Matlab

libTLC54x is a library to communicate with the Texas Instruments TLC548/TLC549 8-Bit A/D-Converter via serial or parallel connector. The library just needs the device to be opened and than you can read data from the TLC54x. libTLC54x hides the process of getting the data bit by bit and also...


Platforms: *nix

TiLP is a linking program for Texas Instruments graphing calculators. TiLP (formerly GtkTiLink) can transfer data between Texas Instruments scientific calculators and a computer/workstation. It works with all link cables (parallel, serial, Black/Gray/Silver Link) and it supports all calcs...


Platforms: *nix

TiEmu is an emulator of Texas Instruments hand-helds (TI89/92/92+/V200). TiEmu is full-featured with a graphical debugger.. TiEmu, a TI89/92(+)/V200 emulator for Linux


Platforms: *nix

ATA over Ethernet Tools are intended for use in conjunction with an ATA over Ethernet (AoE) driver for a Linux 2.6 kernel. They perform simple tasks like listing available devices, triggering device discovery, and restricting the network interfaces on which AoE is performed. Whats New in This...


Platforms: *nix

The TI-Basic Compiler simplifies developing Texas Instruments Calculator programs by allowing users to write code in the same language as they would use on the calculator itself, 'TI-Basic'. While the calculator has such features as auto-completion and instant feedback, the compiler allows users...


Platforms: *nix

'TI-99/4A BASIC' (ti99basic) is a version of Texas Instruments' BASIC as found in ROM on the TI-99/4A. You can use it in interactive mode or pass a BASIC file as a command line parameter.


Platforms: Windows, Mac, BSD, Linux

TilEm is a TI Calculator Emulator that uses Gtk. It is an emulator for the Z80 series of Texas Instruments graphing calculators. It emulates all current Z80 calculator models except the TI-81, and features a debugger, external file loading, and full flash support, including flash app loading. It...


Platforms: Windows, Mac, *nix, C/C++, BSD Solaris

This paper walks you through the process of profiling code running on a Texas Instruments DM6437 DSP. To demonstrate the process we profiled many common DSP algorithms including Auto-Correlation, the Dot Product, the FFT, an FIR filter, an IIR Filter, a Matrix Multiply, and an LMS Filter. These...


Platforms: Matlab

"According to the U.S. National Highway Traffic Safety Administration, single-vehicle road departures result in many serious accidents each year. To reduce the likelihood of a vehicle's straying out of lane, automotive engineers have developed lane tracking and departure warning systems that use...


Platforms: Matlab

The files contained in this zip fileserve as an introduction to using RTDX technology from Texas Instruments with Simulink for the purpose of verifying that that your Simulink simulation is running the same way as your DSP implementation. You will need R2006a+ or greater. R2006a will not...


Platforms: Matlab

TiLP (formerly GtkTiLink) can transfer data between Texas Instruments graphing calculators and a computer. It works with all link cables (parallel, serial, Silver, Direct USB Link) and it supports all calcs (TI73...92+, V200, Nspire).


Platforms: *nix

OrangeWare FireWire IIDC Camera support is designed for FireWire web cameras on all Mac OS X operating systems version 10.1 or greater. Some of the supported web cameras include the Orange Micro iBOT, ADS Pyro WebCam, Vcam IEEE 1394 PC Camera, Aplux 1394 PC Camera and any FireWire web camera...


Platforms: Mac

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got...


Platforms: Mac, BSD, Linux

GTK ACX Tool provides a tool that displays the status of the ACX100 driver. The GTK ACX Tool displays the status of the Texas Instruments (TI) ACX100 IEEE 802.11 driver. This tool could be used just with driver developed by wlan.kewl.org Project on FreeBSD 5.2 and later versions. It uses GTK+...


Platforms: *nix

Ever had painful headaches searching through the web trying to find the correct drivers for your newly formatted PC? 3DP Chip and 3DP Net are extremely useful freewares that will minimize your effort and time spent in finding the drivers for your PC components. 3DP Net has the ability to...


Platforms: Windows

Ever had painful headaches searching through the web trying to find the correct drivers for your newly formatted PC? 3DP Chip and 3DP Net are extremely useful freewares that will minimize your effort and time spent in finding the drivers for your PC components! 3DP Net has the ability...


Platforms: Windows, Windows 8, Windows 7, Windows Server

Free serial port monitor software lets you troubleshoot communications problems and log data from RS232, RS422, RS485 and Modbus instruments. Control the state of the PC's serial port output lines and see the state of the serial port input lines. Free technical support for life. Understands...


Platforms: Windows