Texas Instruments Cdc

Used on cellular phones to filter outbackground noise. Measure the signal to noise ratio of an audio input in realtime. Pass speech but give silence where the input is noise (hiss, snap crackle and pop).Includes a tutorial on how to use statistics (correlation coefficient) to calculate the signal...

libTLC54x is a library to communicate with the Texas Instruments TLC548/TLC549 8-Bit A/D-Converter via serial or parallel connector. The library just needs the device to be opened and than you can read data from the TLC54x. libTLC54x hides the process of getting the data bit by bit and also...

TiLP is a linking program for Texas Instruments graphing calculators. TiLP (formerly GtkTiLink) can transfer data between Texas Instruments scientific calculators and a computer/workstation. It works with all link cables (parallel, serial, Black/Gray/Silver Link) and it supports all calcs...


Platforms: *nix

TiEmu is an emulator of Texas Instruments hand-helds (TI89/92/92+/V200). TiEmu is full-featured with a graphical debugger.. TiEmu, a TI89/92(+)/V200 emulator for Linux


Platforms: *nix

The TI-Basic Compiler simplifies developing Texas Instruments Calculator programs by allowing users to write code in the same language as they would use on the calculator itself, 'TI-Basic'. While the calculator has such features as auto-completion and instant feedback, the compiler allows users...


Platforms: *nix

'TI-99/4A BASIC' (ti99basic) is a version of Texas Instruments' BASIC as found in ROM on the TI-99/4A. You can use it in interactive mode or pass a BASIC file as a command line parameter.


Platforms: Windows, Mac, BSD, Linux

TilEm is a TI Calculator Emulator that uses Gtk. It is an emulator for the Z80 series of Texas Instruments graphing calculators. It emulates all current Z80 calculator models except the TI-81, and features a debugger, external file loading, and full flash support, including flash app loading. It...


Platforms: Windows, Mac, *nix, C/C++, BSD Solaris

This paper walks you through the process of profiling code running on a Texas Instruments DM6437 DSP. To demonstrate the process we profiled many common DSP algorithms including Auto-Correlation, the Dot Product, the FFT, an FIR filter, an IIR Filter, a Matrix Multiply, and an LMS Filter. These...


Platforms: Matlab

"According to the U.S. National Highway Traffic Safety Administration, single-vehicle road departures result in many serious accidents each year. To reduce the likelihood of a vehicle's straying out of lane, automotive engineers have developed lane tracking and departure warning systems that use...


Platforms: Matlab

The files contained in this zip fileserve as an introduction to using RTDX technology from Texas Instruments with Simulink for the purpose of verifying that that your Simulink simulation is running the same way as your DSP implementation. You will need R2006a+ or greater. R2006a will not...


Platforms: Matlab

TiLP (formerly GtkTiLink) can transfer data between Texas Instruments graphing calculators and a computer. It works with all link cables (parallel, serial, Silver, Direct USB Link) and it supports all calcs (TI73...92+, V200, Nspire).


Platforms: *nix

The Linux TLAN driver supports various Ethernet adapters based on the ThunderLAN chip which was co-developed by Compaq and Texas Instruments.


Platforms: *nix

Free serial port monitor software lets you troubleshoot communications problems and log data from RS232, RS422, RS485 and Modbus instruments. Control the state of the PC's serial port output lines and see the state of the serial port input lines. Free technical support for life. Understands...


Platforms: Windows

SRecord is a collection of powerful tools for manipulating EPROM load files. SRecord project understands a number of file formats including Motorola S-Record, Intel hex, Tektronix hex and binary, for both input and output. SRecord filters include cropping, filling, splitting, joining, and more....


Platforms: *nix

GTK ACX Tool provides a tool that displays the status of the ACX100 driver. The GTK ACX Tool displays the status of the Texas Instruments (TI) ACX100 IEEE 802.11 driver. This tool could be used just with driver developed by wlan.kewl.org Project on FreeBSD 5.2 and later versions. It uses GTK+...


Platforms: *nix

OrangeWare FireWire IIDC Camera support is designed for FireWire web cameras on all Mac OS X operating systems version 10.1 or greater. Some of the supported web cameras include the Orange Micro iBOT, ADS Pyro WebCam, Vcam IEEE 1394 PC Camera, Aplux 1394 PC Camera and any FireWire web camera...


Platforms: Mac

TI-Basic Compiler is an accessible and handy tool that can be accessed from the Command Line and can compile TI-BASIC code to the 8XP file format. This is used on Texas Instruments calculators, namely the TI-83, TI-83+ and TI-84+.


Platforms: Windows

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got...


Platforms: Mac, BSD, Linux

Time Machine Everywhere allows activation of the unsupported network drives in Time Machine and the creation of the archive base for Time Machine. Features: * Use the utility to enable support for network drives * Use the utility to create the archive from which to safeguard * Connect the...


Platforms: Mac

Free Texas Cichlid Fish Screensaver lets yourself step into a stunning underwater world with colorful texas cichlid include blue texas cichlid, red texas cichlid and green texas cichlid. You can feed the fish and tickle the fish to make them move. The texas cichlid fish appear to be more...


Platforms: Windows, Windows 7