Temperature

Kima is a KDE kicker applet that shows the current CPU temperature and frequency. Make sure you have enabled the temperature ACPI kernel module (thermal.ko). Installation: run configure ./configure --prefix=$(kde-config --prefix) build the sources make install the applet (with...

A free conversion utility that will allow you to convert the most popular units of acceleration, angle, distance, temperature, volume

wmacpi_temp is a Window Maker dock application that reads the temperature file in /proc/acpi in ACPI enabled kernels. In short, it displays the temperature of the processor, updated every minute (in Celsius or Fahrenheit). Installation: 1. make 2. su 3. make install (to put it in...


Platforms: *nix

Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. Requires ACPI.


Platforms: Mac

If you use Linux with WindowMaker and have a Dell 8XXX Laptop, installed the i8kutils and like some nice DockApps then try this one. wmi8k monitores the CPU temperature and the fan speed. Whats New in This Release: - By clicking on F R and F L you can now control the fans! (Switch fom off...


Platforms: *nix

Gatotray project is a colorful tray icon to watch over CPU status including usage, frequency and temperature..


Platforms: *nix

acpitail project shows in a tail-like way information off the battery-state, fan-states, temperatures, etc. of an ACPI capable system (mostly laptops). Screendump: laptop:/home/folkert/acpitail-0.1# ./acpitail -A 2 Mon Jun 18 15:28:45 2007 BAT0 remaining capacity: 99% (0 minutes) Adapter...


Platforms: *nix

Temperature Monitor is an application to read out all available temperature sensors in Macintosh computers. The program can display and visualize measured values in a large variety of fashions. The application supports the following operations on the measured readings: display in a default window...


Platforms: Mac

wmhdplop project monitors your hard drives and displays visual information about their activity (read, write, swapin, swapout), and optionally (if hddtemp is running as a daemon), displays their temperature/status..


Platforms: *nix

G4FanControl is a small utility that can be used to specify a certain minimum temperature limit that much be reached before the fans on a PowerBook G4 laptop start up (note: Apple sets the default temperature limit to 60° on these units). Default temperature limits will be restored by Mac OS X...


Platforms: Powerbook G4

GtkSysinfo project is a perl-Gtk2 software for Linux which makes it possible to obtain a maximum of information about the system such as temperature(with lm_sensors) , CPU frequency, hardware(with PciUtils) , network , ACPI ....


Platforms: *nix

DIY Zoning is a repository containing the information about architecting, designing and implementing the Do It Yourself Temperature Zoning system, introductory course for those planning to install a ready-made temperature zoning system, and those who just want their home comfort. Whats New in...


Platforms: *nix

heatload is a tool for Linux which plots the CPU load against the CPU temperature as measured by the ACPI subsystem. Installation: As this package is made with the GNU autotools you should run ./configure inside the distribution directory for configuring the source tree. After that you should...


Platforms: *nix

DockTemp displays the outside temperature in your OS X Dock.


Platforms: Mac

Detect and display hard disk drive and SSD health and temperature information without starting the installed operating system. The software can be started from a suitable bootable floppy, CD, pendrive, memory card or USB hard disk to diagnose IDE/SATA hard disks and SSD devices in the system...


Platforms: MS-DOS, Other

By using the Linux console edition of Hard Disk Sentinel, it is possible to examine the temperature and health information (and more) of IDE, S-ATA (SATA II also), SCSI and USB hard disks connected to motherboard or external controller cards. The user must be root to use this software or start it...


Platforms: Linux, Linux Console

Not a real lab, but definitely a handy temperature conversion tool. This tiny instrument will simultaneously show Celsius, Fahrenheit and Kelvin degrees with one push on the slider. Options/Features: - real-time temperature conversion tool - one slider shows all: Fahrenheit, Celsius and Kelvin...


Platforms: Windows

Backup drivers free, check your hardware temperature and monitor important indicators with free effective driver backup program called IQmango Driver BLADE! Easily restore drivers from full backup copies created and generate status reports immediately. IQmango Driver BLADE recognizes all PC...


Platforms: Windows

This script allows you to assign temperature values in one scale and you have it available in others as respective attributes. Kelvin, Celsius, Fahrenheit, and Rankine are supported (k, c, f, r attributes).


Platforms: Windows, Mac, *nix, Python, BSD Solaris

Color Sensation is the first app to let you quickly and easily create dramatic photos by converting them to user defined Black and White styles, while leaving the interesting areas in color - A range of image processing tools like Brightness, Contrast, Sharpen/Smooth give you more freedom to...


Platforms: iPhone