Serial

REMOTE DRiVE is the Emergency-Access tool No. 1 for Windows NT/2000 and Windows XP. Easy administrative access any computer (FAT, FAT32 and NTFS) over the parallel or the serial cable connection. Run included User Manager, CHKDSK, CIA Unerase or any AntiVirus softvare on the remote drive, unlock...

ommLog is a freeware used for record and monitor the data from serial port of PocketPC. It would be useful for record data from total station, GPS and other rs232 device connected to PDA. Is is also useful for test the line of rs232 connected to PDA.

Use BillSerialMonitor for monitoring bi-directional communications between two devices RS-232 (No physical cable is required !). Bill Serial Monitor is a monitoring application, which allows you to view, test, log, and analyze serial port activities.Protocol Analyzer function allows you to...


Platforms: Windows

Emulates WY50/50+/60 terminals. Part of the WiseTerm suite of serial/telnet emulators. Features: programmable keyboard; protect/write-protect modes; up to 132x43 displayincluding Econ-80; char, line, page attributes; multiple, sizeable page modes; full split-screen support; status line; key...


Platforms: DOS, Windows

Emulates WY50/50+/60 terminals. Part of the WiseTerm suite of telnet/serial emulators. Features: programmable keyboard; protect/write-protect modes; up to 132x43 displayincluding Econ-80; char, line, page attributes; multiple, sizeable page modes; full split-screen support; status line; key...


Platforms: Windows

Conserver is an application that allows multiple users to watch a serial console at the same time. Conserver project can log the data, allows users to take write-access of a console (one at a time), and has a variety of bells and whistles to accentuate that basic functionality. The idea is that...


Platforms: *nix

CuteCom is a graphical serial terminal, like minicom (or Hyperterminal on Windows, but I don't want to compare CuteCom to it, since Hyperterminal is really one of the worst applications I know). Currently it runs on Linux, FreeBSD and Mac OS X. Features: * easy to use GUI * no cryptic...


Platforms: *nix

DigiTemp uses a simple serial port adapter to read temperatures from the Dallas Semiconductor 1-Wire DS1820 digital temperature sensors. DigiTemp supports the DS9097-U adapter, supports DS2409 based 1-Wire hubs, and features a 1-Wire walk that will display all devices on the LAN, not just...


Platforms: *nix

Hardware::iButton is a Perl module that allows to talk to DalSemi iButtons via a DS2480 serial widget. SYNOPSIS use Hardware::iButton::Connection; $c = new Hardware::iButton::Connection "/dev/ttyS0"; @b = $c->scan(); foreach $b (@b) { print "family: ",$b->family(), "serial number: ",...


Platforms: *nix

QKtemp project is a program that records temperature data for RRDtool from the serial port. QKtemp records temperature data from the Qkits.com VK011 temperature interface into an RRD database, allowing you to graph temperature over time easily. The VK011 is a serial-port powered module with...


Platforms: *nix

ConMan is a serial console management program designed to support a large number of console devices and simultaneous users. The project supports local serial devices, remote terminal servers (via the telnet protocol), and external processes (e.g., using Expect to control connections over telnet,...


Platforms: *nix

Serbert is a command line utility which performs a Bit Error Rate Test (BERT) on serial lines for Unix and its variants. It does this by transmitting bytes, and waiting for their uncorrupted return. Serbert, however, does not provide a true Bit Error Rate Test (BERT), as it does not check the...


Platforms: *nix

PonyProg is a serial device programmer with a user friendly GUI framework available for Intel Linux and Windows. PonyProgs purpose is being able to read from and write to most serial devices. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR, and Microchip PIC micro....


Platforms: *nix

The ser2net daemon allows telnet and TCP sessions to be established with a units serial ports. Note that ser2net supports RFC 2217 (remote control of serial port parameters), but you must have a complient client. The only one I know it is kermit application (http://www.columbia.edu/kermit)....


Platforms: *nix

Xr3 is package of Linux tools for the RedRat2 serial port based Learning IR Remote Control. It was initially developed for use with a ReplayTV Personal Video Recorder(PVR) but has now been expanded to handle any kind of IR controlled A/V equipment. The package includes: mr3 - A Control Panel...


Platforms: *nix

GnomeRSVP project is a rapid serial visual projector. GnomeRSVP is a "Rapid Serial Visual Projector" similar to products like AceReader. In this dynamic representation of text, each word is flashed on the screen one at a time in succession. The reader is less inclined to "oralize" the text,...


Platforms: *nix

serialsnoop is a command-line tool for Linux that echoes bytes to and from any two serial ports, PTYs, or network sockets , and prints all traffic to stdout in hex and ASCII. to install (binary, debian): get the latest x86 .deb file and dpkg -i the thing. to install (from source): youll...


Platforms: *nix

Dictator project is a Rapid Serial Visual Presentation (RSVP) on-screen text reader. Dictator permits faster, easier on-screen reading of text using the method of Rapid Serial Visual Presentation (RSVP). Features include dynamic text flow, Unicode support, a bookmark manager, customizable Web...


Platforms: *nix

LibSerial provides a collection of C++ classes that allow one to access serial ports on POSIX systems like standard C++ iostream objects. Member functions are provided for setting various parameters of the serial ports such as the baud rate, character size, flow control and others. LibSerials...


Platforms: *nix

Device::SNP is a Perl extension for the GE Fanuc SNP-X serial protocol as used by GE Fanuc DataPanel data terminals. See http://www.gefanuc.com/en/ProductServices/VisPCSolutions/DataPanel/index.html SYNOPSIS use Device::SNP; my $s = new Device::SNP::Slave( Portname => /dev/ttyUSB0, Debug...


Platforms: *nix