Ethernet Cable

Use BillSerialMonitor for monitoring bi-directional communications between two devices RS-232 (No physical cable is required !). Bill Serial Monitor is a monitoring application, which allows you to view, test, log, and analyze serial port activities.Protocol Analyzer function allows you to...

myNetMon, Network Monitor and Packet Analyzing Tool (V.2.0) myNetMon is windows based network monitor and packet analyzing (sniffer) tool.Features:* Physicial (Ethernet), * ARP, RARP, IPX, IPV4-6, * Displaying ICMP, UDP, TCP ... packets according to their features, * Displaying packets in...

MZL and Novatech TrafficStatistic shows accumulated bandwidth usage of a network interface like ethernet, DSL or PPP in tray. It generates IP traffic statistics IPDR data and the user can generate reports on his top bandwidth consumers cut by host and service. Reports allow to identify and to...


Platforms: Windows

NSL is a small, easy to use TCP/IP protocol monitor which can be used to see your exact throughput on both incoming and outgoing data - whether you're using a modem, cable modem, DSL, or even local network! NSL doesn't just stop there, it lets you see how quickly your data goes from your computer...


Platforms: Windows

MZL & Novatech TrafficStatistic shows accumulated bandwidth usage of a network interface like ethernet, DSL or PPP, in the tray. It generates IP traffic statistics IPDR data and the user can generate reports on top bandwidth consumers by host and service. Reports allow you to identify and analyze...


Platforms: Windows

Internet access speed accelerator for modem, LAN or cable for an improvement of up to 500%.This is possible thanks to modifications to the Microsoft TCP / IP configuration. It will help you increase the speed of downloads, but also to surf for information faster, chat, online gaming....Although...


Platforms: Windows

ConnectStorm personal servers provide a rich media experience for up to 32 simultaneous users, and can be run from DSL or Cable modems with dynamic IP's.


Platforms: Windows

PPPOEd is PPP-over-Ethernet implementation. To install follow these commands run ./Install_pppoe Follow the prompts For more details on the prompts etc, look at the file QUICK-INSTALL-example The man pages on pppoed are also helpful for documentation: man pppoed Whats New in This...


Platforms: *nix

dslKonnector is a Kommander script to start, stop, restart DSL connection (ppp over ethernet), using tools "pon dsl-provider" and “poff dsl-provider". To use it you will need to have superuser privileges. dslKonnector does not configure dsl connection, so you will have to setup it using tool...


Platforms: *nix

Fli4l is a single floppy distribution, Linux-based ISDN, DSL and Ethernet-Router. You can build it from an old 486 based pc with 16 megabyte memory, which is more than adequate for this purpose. The necessary boot-disk can be built under Unix, Linux or Windows. You dont need any specific...


Platforms: *nix

KNetworkManager is the KDE front end for NetworkManager. KNetworkManager project provides a sophisticated and intuitive user interface which enables users easily to switch their network environment. The range of functions encompasses the features implemented by NetworkManager daemon. Up until...


Platforms: *nix

Laptops which use dynamic IP address assignment via DHCP have the problem that the boot process is much longer when no wire is connected to the Ethernet card. This is because the startup scripts have to wait for the DHCP request to time out. ethwireck can detect if the physical layer of the...


Platforms: *nix

FREESCO (stands for FREE ciSCO) is a free replacement for commercial routers supporting up to 10 ethernet/arcnet/token_ring/arlan network cards and up to 10 modems..


Platforms: *nix

netEasy project allows easy and fast configuration of ethernet interfaces in Linux. With netEasy, its possible to change network parameters such as IP address, netmask, and gateway in an easy, fast, and interactive way. The use of a DHCP server is also possible. The settings may also be saved...


Platforms: *nix

Linux LiveCD Router Documentation package contains documentation for the Linux LiveCD Router. Linux LiveCD Router allows you to share and firewall your broadband connection and use WiFi. It works with DSL, cable modem, T1, and dial-up connections and supports inexpensive hardware such as USB...


Platforms: *nix

APCComm is a program which enables transfering files between an Amiga and a PC running GNU/Linux using a LapLink cable. Its fast (up to 38 KByte/s), easy to use (no configuration needed) and there is a GUI for the amiga. APCComm can transfer files and directories so it can be used for easy...


Platforms: *nix

RTnet is an Open Soure hard real-time network protocol stack for Xenomai and RTAI (real-time Linux extensions). RTnet project makes use of standard Ethernet hardware and supports several popular NIC chip sets, like Gigabit Ethernet. Moreover, Ethernet-over-1394 support is available based on the...


Platforms: *nix

Modem.pl is a small script that scrapes the web interface of a Motorola SURFboard cable modem for various status conditions like signal strength and signal to noise. The results are sent to STDOUT where they can be easily piped into a log file. The modem values are also checked for reasonable...


Platforms: *nix

SIB (Simple IPX Bridge) is able to tunnel IPX and IP frames received by your Ethernet device via UDP over the Internet. It is able to put the interface it listens on to promiscous mode, so all frames (not only broadcasts, and frames for the tunneling server) can be received. Actually every...


Platforms: *nix

iTattle is a network administration tool that can get information on your wireless AirPort Extreme, built-in Ethernet and System.


Platforms: Mac