Ddigital Firmware

This update is for specific iMac computers with an ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card installed, running Mac OS X 10.5.2 or later. It updates the ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card firmware in the iMac to improve system stability. This...

This update is recommended for all Mac Pro (Mid 2010) models and addresses the following issues: * Resolves an issue that prevented the firmware password prompt from being displayed * Resolves an issue that prevented the Boot Picker from being presented if Ethernet is connected to a network...

This update includes changes to the Lights-Out Management environment of the Xserve (Early 2008). It addresses issues that cause frequent power supply and fan notifications to be sent. This update is strongly recommended for all Xserve (Early 2008) systems. The Xserve Lights-Out Management...


Platforms: Mac

This update fixes several issues to improve the stability of Xserve computers. To complete the firmware update process, perform the following steps: 1) Locate Xserve EFI Firmware Update.app in /Applications/Utilities and double click on it. 2) Follow the onscreen instructions. If you will be...


Platforms: Mac

This update fixes intermittent system freeze issues for iMac computers with ATI Radeon HD 4850 graphics and fixes wake-from-sleep issues in Boot Camp. To complete the firmware update process, please follow the instructions in the updater application (/Applications/Utilities/iMac EFI Firmware...


Platforms: Mac

Apple Mac mini EFI Firmware Updater includes fixes that enhance the stability of Lion Recovery from an Internet connection, and resolve issues with Apple Thunderbolt Display compatibility and Thunderbolt Target Disk Mode performance on Mac Mini (mid 2011) models.


Platforms: Mac

Thunderbolt Display Firmware Update improves the stability of the Apple Thunderbolt Display. The updater application will be installed in the Utilities folder inside the Application folder and will be launched automatically when you close this installer. Please follow the instructions in the...


Platforms: Mac

A simple to use backup solution. Drobo utilizes the revolutionary BeyondRAID storage technology that protects data against a hard disk crash, yet is simple enough for anyone to use. As long as you have more than a single disk in Drobo, all data on Drobo is safe no matter which hard disk fails....


Platforms: Mac

This package provides utilities for parsing and utilising the information in an iSCSI Boot Firmware Table (iBFT). The iBFT is a table created by iSCSI boot firmware (such as Etherboot), in order to pass parameters about the iSCSI boot device to the booted operating system. There are three...


Platforms: *nix

leJOS is a Java-based replacement firmware (OS) for LEGO Mindstorms programmable bricks, including RCX and NXT. It supports threads, exceptions, synchronization, floating point arithmetic, strings, and so on, but there is no garbage collection yet. The project is also designed to be portable to...


Platforms: *nix

HermesAP is a package containing Orinoco driver patches and tertiary firmware extraction/upload utilities to switch Hermes/Airport WaveLAN cards to BSS master (AccessPoint) mode under Linux. The package contains next components: patched orinoco-0.13c driver for o BSS master support (with WDS)...


Platforms: *nix

DD-WRT is an alternative firmware for the Linksys WRT54G/GS/GL and the Asus WL-500 deluxe 802.11g wireless routers. DD-WRT was originally based on the Alchemy Firmware from Sveasoft Inc., which is in turn based on the original GPLd Linksys Firmware and a number of other open source projects....


Platforms: *nix

HyperWRT is a power boost firmware for the Linksys WRT54G and WRT54GS router. HyperWRT goal is to add a limited set of features to the last Linksys firmware, extending its possibilities but staying close to the official firmware. HyperWRT is based on Linksys 3.03.6 firmware for the WRT54G and...


Platforms: *nix

After sporadic reports of data loss and corruption with FireWire 800 devices operating with the new Mac OS X 10.3 "Panther" operating system, Apple Computer made an official press release to indicate this problem has been traced to Oxford Semiconductor's 922 Firmware used by nearly all FireWire...


Platforms: Mac

Apple Computers has discovered a serious issue with their "Panther" operating system in the operation of FireWire storage products employing the the Oxford 922 FireWire 800 chipset (firmware version 1.02), a problem serious enough that it can result in loss of all data on your FireWire drive....


Platforms: Mac

Attention! Apple OS 10.3.6 update and PHR-100AC, 100AF, 250CC and 500BC hard driver enclosures:The recent OS 10.3.6 update causes above listed PHR Firewire400 hard drive enclosures fail to mount in Desktop. This problem does not occur in other Macally Firewire400 and Firewire800 enclosure models....


Platforms: Mac

LaCie Silverscreen Firmware solves the HFS/HFS+ format issue under Mac OS 9.x. (Files are not recognized on TV). Please copy the files in the oFirmwareo folder and make the update on TV.


Platforms: Mac

TSDNWIN is a handy application that was created to assist you in the process of updating the firmware of your Samsung optical drives. The process is completely automated and all you'll have to do is select the drive and then download the latest available version.


Platforms: Windows, XP, Windows Vista, 7, 7x64

The world's most advanced mobile operating system keeps getting better. Download the free iOS 4.3 Software Update and get new features that let you do even more with your iPhone, iPad, and iPod touch. The software update is free. It's easy. And you can download it right now.on) Products...


Platforms: iOS

nVFlash - NVIDIA Firmware Update Utility. Utility video updates from NVIDIA. Works only from the clean DOS, in the absence of memory managers expanded memory, such as HIMEM/EMM386/QEMM.


Platforms: Windows