Cpu Fan Control

Lubbo's Fan Control is designed to be a speed fan controller for MacBook Pro Unibody (Nvidia) under BootCamp. It allows to control MacBook fans settings their speeds depending on the CPU and GPU temperature and it reports CPU and GPUs temperatures, current and target fans RPM.

Linux ATI CPU HDD Control Daemon is able to reduce power consumption in a laptop by scaling back CPU, GPU (Radeon only), and HDD. It uses CPUFreq, ACPI, HDDTemp, and internal functions. It also checks for thermal overheating for the sake of laptop health. Now implementing an app scheduling...

Do you think your MacBook (Pro) is running too hot? Then give Fan Control a try.Some MacBook (Pro) are just to hot for daylong use. Fan Control adjusts the minimum fan speed depending on the current CPU temperature. For safety, it leaves the original automatic fan speed control intact.


Platforms: Mac

wmadm is a dockable app permits to monitor temperature and fan control parameters on an ibook2. This package depends on the adm103x linux-2.6 module provided at the same url. The green part shows the temperature, the yellow line shows temperature at which fan will be started at min speed. And...


Platforms: *nix

karabass is my first karamba theme , just nice one, soory for my unpercfect english but its not so easy for a frog. karabass is just system information(memory swap ram cpu fan eth0 houre amarok now playing..) i draw all part with the gimp. Easy to modify it, i put in the compact file a empty...


Platforms: *nix

SensorsView is a freeware program that monitors temperature of CPU, motherboard, hard disks, voltages, and fan speeds. This program informs you about critical values of any parameters of your system (e.g. about overheating the processor or a stop of fans).


Platforms: Windows

Wmsensormon is a doc app for WindowMaker that utilizes lm_sensors to monitor CPU temp, sys temp, fan speeds, and CPU voltage. It offers configurable warnings for overheating, and the sensors displayed are adjustable by the user with command line parameters. Installation: make make install...


Platforms: *nix

Dual Core System Monitor with Amarok is a Superkarmaba theme based on the full system monitor dual core widget. Here are some key features of "Dual Core System Monitor with Amarok": ?*A* full system monitor ?*A* support dual core ?*A* Lan traffic (wifi eth2) ?*A* SO info ?*A* cpu temp ?*A* cpu...


Platforms: *nix

iFanAutoControl is an application to automatic control the fans of the computer and regulate the temperature of MacBook and MacBookPro Apple Computers based on Intel processors and Windows OS.


Platforms: Windows

Small tool for displaying the CPU clock, CPU usage, RAM usage! If you own an ASUS mainboard, use the CrazyInfo_ASUS.exe. You get additional infos about the CPU temp. and the CPU fan speed. First you must have installed Asus PCProbe. Then copy the CrazyInfo_ASUS.exe into the PCProbe directory and...


Platforms: Windows

LinuxBIOS project is aimed at replacing the normal BIOS with a little bit of hardware initialization and a compressed Linux kernel that can be booted from a cold start. The project was started as part of clustering research work in the Cluster Reseach Lab at the Advanced Computing Laboratory at...


Platforms: *nix

GlassHUDX is a beautiful system monitoring theme for SuperKaramba. GlassHUDX is inspired by the wonderful GlassHUD theme from mytharak. It uses modified versions of the backgrounds and some of the layout ideas. GlassHUDX consists of the following widgets: Glassmem - a memory sensor widget...


Platforms: *nix

KuSys-Info is a Ku(buntu) Sys(tem)-Info. KuSys-Info karamba applet is based on transwhite. I adapted it a bit and modified it so that it fits to my system and themes. Detection of OS is not automatically right now, so you probably have to adapt the script. To change to the right network...


Platforms: *nix

G4FanControl is a small utility that can be used to specify a certain minimum temperature limit that much be reached before the fans on a PowerBook G4 laptop start up (note: Apple sets the default temperature limit to 60° on these units). Default temperature limits will be restored by Mac OS X...


Platforms: Powerbook G4

Fan/Temp Karamba Theme is a simple Karamba theme that shows: - CPU Temp - Fan Speed - Chassis Temp - HDD Temp (max 3 hdds) I hope you like it like me. Feedback is welcome. No liability is assumed for damages to hard and software !!. New Driver and Tools KDE-Look.org Community Portal...


Platforms: *nix

Total Power Control puts at your mouse and fingertips a well-designed tool to help you get your work done quickly and easily. TPC provides everything you need to fully control the power functions of your computer. No more crawling around and clicking through layered menus! With only two clicks...


Platforms: Windows, Windows Vista, XPX64, 7, 7x64

Flash and Pics Control is an Internet Explorer add-on that allows you to easily enable or disable flash animation and pictures. Having flash and pictures disabled lets you reduce the amount of incoming traffic and, thus, save your money. Disabled flash animation (which is generally an...


Platforms: Windows

This program provides an accurate snapshot of the percentage utilization of the CPU, the technique illustrated works on Windows 95/98/nt/2000/xp/2003. Free, no-nags.


Platforms: Windows

InletEX ERC-Easy Remote Control can help you eliminate problem to effectual remote support. Easy Remote Control (ERC) is one of the best programs for remote administration under Windows that allow you to work remotely on a computer using the regular graphic user interface (GUI). Easy Remote...


Platforms: Windows

With Remote Administrator Control you can work without any limits on a remote computer with operation system Windows, as if working on your local computer. You can connect through Internet/Intranet network with the TCP/IP protocol. You can also connect to computers without public...


Platforms: Windows, Windows 7, Windows Server