Codevision Avr

revava is a single pass disassembler that reads in a file containing a program intended for an Atmel AVR microcontroller and outputs assembly code that can be input to an avr assembler. The output of revava contains assembler mnemonics where possible and dc.W declarations where no mnemonic...

Micro-IDE is a free C compiler for AVR microcontrollers, this compiler is intended to work with AVR micro controllers from ATMEL. The principle is to create assembler code from C code using micro-IDE studio and create assembler hex file to be loaded to the AVR chip using the free avr studio from...

vAVRdisasm is an AVR program disassembler. The project supports all 136 AVR instructions as defined by the Atmel AVR Instruction Set, revision 0856E-AVR-11/05. This single-pass disassembler can handle Atmel Generic, Intel HEX8, and Motorola S-Record formatted files containing valid AVR program...


Platforms: *nix

PonyProg is a serial device programmer with a user friendly GUI framework available for Intel Linux and Windows. PonyProgs purpose is being able to read from and write to most serial devices. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR, and Microchip PIC micro....


Platforms: *nix

The rp6simul is a tool that acts as a simulation software for the RP6 robot, manufactured by AREXX engineering. Besides support for all peripherals on the robot base, the simulator also fully supports the m32 extension module, and both can be simulated either independently or simultaneously....


Platforms: Windows

AVRTimerCalculator is a small, easy to use, handy application specially designed to help you get the settings for an AVR-timer right. So, if you are an AVR-timerfan take AVRTimerCalculatorfor a spin and see how it goes. for WindowsAll


Platforms: Windows

ISP Programmer is a useful piece of software designed to support programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.


Platforms: Windows

Perl Audio Converter is a tool for converting multiple audio types from one format to another. It supports AAC, AC3, AIFF, APE, AU, AVR, BONK, CAF, CDR, FAP, FLA, FLAC, IRCAM, LA, LPAC, M4A, MAT, MAT4, MAT5, MMF, MP2, MP3, MP4, MPC, MPP, NIST, OFR, OFS, OGG, PAC, PAF, PVF, RA, RAM, RAW, SD2, SF,...


Platforms: *nix

PACPL-KI is a Perl Audio Converter Kommander Interface. Supported Encode Formats: mp2, mp3, ogg, flac, fla, ape, shn, aac, m4a, mp4, mpc, mpp, wv, ofr, ofs, tta, pac, lpac, kxs, wav, aiff, au, snd, raw, voc, smp, avr, cdr, ac3, la, bonk, ra Supported Decode Formats: mp2, mp3, ogg, flac,...


Platforms: *nix

AVR Libc is a Free Software project whose goal is to provide a high quality C library for use with GCC on Atmel AVR microcontrollers. Together, avr-binutils, avr-gcc, and avr-libc form the heart of the Free Software toolchain for the Atmel AVR microcontrollers. They are further accompanied by...


Platforms: *nix

i2c-tiny-usb is a open source/open hardware project. Attach any I2C client chip (thermo sensors, AD converter, displays, relais driver, ...) to your PC via USB ... quick, easy and cheap! Drivers for Linux, Windows and MacOS available. The i2c-tiny-usb project is an open source/open hardware...


Platforms: *nix

LCD2USB is a open source/open hardware project. LCD2USB was meant to be cheap and to be made of easily available parts. It is therefore based on the Atmel AVR Mega8 CPU and does not require any difficult to obtain parts like separate USB controllers and the like. The total cost (without display...


Platforms: *nix

avrLab is an IDE (Integrated Devlopment Environment) for the AVR?*A* family of microcontroller from Atmel?*A* Currently it features an advanced editor with syntax highlighting for assembly language. tavrasm is supported as macro assembler and uisp is used for communication with the AVR?*A*....


Platforms: *nix

NanoVM is a tiny (less than 8 kB of code including simple native classes and a bootloader) implementation of the Java VM. NanoVM project currently runs on Linux and the AVR microcontroller family. Unix/Linux is supported as the main development and testing platform, whereas the VM is primarily...


Platforms: *nix

CDK4AVR stands for Cross Development Kit for Atmels AVR RISC processor serie and should support your development with a comprehensive Assembler and C development environment for even this processor familie under Linux. It will present only free of fee tools, so you can use it without risks....


Platforms: *nix

AVR-Ada aims to make the Ada part of gcc usable on AVR microcontrollers..


Platforms: *nix

8-bit AVR microcontrollers are getting more and more popular chips for many proposal. They utilise the AVR RISC Architecture, have more than one hundred instructions, most of them executes at single clock cycle. They have also nice peripheral devices like 8/16 bit timer, analogue comparator, PWM,...


Platforms: Windows, Mac, *nix, C/C++, BSD Solaris

SoX Wrap is a wrapper of the conversion routines of the open-source sound utility SoX. It handles conversions between many different formats: 8svx, aiff, al, au, avr, cdr, cvs, dat, gsm, hcom, la, lu, maud, mp3, nul, ogg, prc, raw, sb, sf, sl, sph, smp, snd, sndt, sw, txw, ub, ul, uw, vms, voc,...


Platforms: Mac

Perl Audio Converter is a tool for converting multiple audio types from one format to another. It supports AAC, AC3, AIFF, APE, AU, AVR, BONK, CDR, FLA, FLAC, LA, LPAC, M4A, MP2, MP3, MP4, MPC, MPP, OFR, OFS, OGG, PAC, RA, RAM, RAW, SHN, SMP, SND, SPX, TTA, VOC, WAV, WMA, and WV. It can also...


Platforms: Windows, Mac, *nix, Perl, BSD Solaris

PowerPanel® Plus software is included with many Smart App Sinewave and Smart App AVR Series UPSs. This exclusive software provides for the control and monitoring of your UPS, in order to fully protect your computer system, components, peripherals, and data. In the event of a power loss,...


Platforms: Windows