Camera Control Protocol

VISCA Camera Control Library is a library for controlling a VISCA(tm) compliant camera through the RS232 port of your PC. VISCA, on its side, is a protocol developed by Sony so that a lot of machine vision cameras from Sony are compliant with VISCA. Typical cameras include the FCB-IX47 family...

Very Simple Control Protocol Daemon is a daemon for home automation tasks. VSCP protocol is a very simple and free protocol for SOHO automation tasks & friends. The protocol is so easy that everyone can grasp the idea behind it in a few minutes. Therefore its also very easy to construct and...

Icarus Camera Control came about because I have a Nikon D80 that I want to connect to telescopes and control via my MacBook. Nikon sells software for camera control (Camera Control Pro) but it is expensive and getting more so, it is terribly slow, and is a horrible battery hog. It is completely...


Platforms: *nix

This program allows users of PTP cameras to remote control the camera, i.e. for tethered capture. It is intended as a replacement for vendor supplied camera control software that performs badly on portable computers. This is open source software, not closed shareware. Easy-to-install bundles are...


Platforms: Mac

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Features . Small, simple, and easy to parse . Support many classes of astronomical...


Platforms: *nix

NetPacket::TCP is a Perl module to assemble and disassemble TCP (Transmission Control Protocol) packets. SYNOPSIS use NetPacket::TCP; $tcp_obj = NetPacket::TCP->decode($raw_pkt); $tcp_pkt = NetPacket::TCP->encode($ip_pkt); $tcp_data = NetPacket::TCP::strip($raw_pkt); NetPacket::TCP...


Platforms: *nix

This function MOUSE3D enables mouse camera control on an certain figure axes.Enable mouse control with mouse3d(axis-handle) or just mouse3dMouseButtons Left : Rotate Right : Zoom Center : Pan Keys 'r' : Change mouse rotation from inplane to outplane 'i' : Go back to initial viewExample, [X,Y,Z] =...


Platforms: Matlab

LibLO is an implementation of the Open Sound Control protocol for POSIX systems. LibLO project was started by Steve Harris and now maintained by Nicholas Humfrey. This means that it cannot be used in closed-source systems you intend to distribute - if you have a specific requirement for liblo...


Platforms: *nix

RTSP is the Real Time Streaming Protocol, which serves as a control protocol, and as a jumping off point for negotiating transports, such as RTP, multicast and unicast, and negotiating codecs off of servers in a file format independent way. RTSP was jointly submitted to the IETF in October,...


Platforms: *nix

WT-3 Setup Utility is a handy utility, for Nikon digital camera users, that allows you to create wireless profiles for the D200 and the WT-3 for wireless image transfer directly to computer via FTP or Camera Control Pro. for Windows2K, XP, Vista, 7


Platforms: Windows, XP, Windows Vista, 7

A Java library implementing the INDI distributed control protocol (http://indilib.org). Designed to easily implement new INDI Clients (graphical and not graphical ones), INDI Drivers and INDI Servers.


Platforms: Windows, Mac, Linux

Implementation of Yamaha's MIDI control protocol for their digital consoles.


Platforms: Windows, Mac, Linux

EVILib is a C++ library for controlling the serial interface with Sony color video cameras EVI-D30(31), EVI-D70(P) and EVI-D100(P). The library's C++ source is released under LGPL license. Sample program provided with the library.


Platforms: *nix

multican is a Canon EOS class camera remote control utility. multican is able to remote control 300D, 350D, 30D, 20D, and 5D cameras and can be scripted to control up to six attached cameras. Which functions are supported? Several remote control functions are available in scripts, they are:...


Platforms: *nix

The aim of the project was to create a system using an artificial 3D environment to allow generation, analysis/processing and subsequent activity such as autonomous navigation before they are allowed to, say, drive a vehicle, fly a plane or even drive your automatic lawn mower or vacuum...


Platforms: Matlab

pkTriggerCord was designed as an Open Source remote control application for Pentax DSLR cameras. After you connect the camera to your PC with the USB cable, you can control the camera from pkTriggerCord. You can read status information, you can change several settings, and you can take...


Platforms: Windows

Delphinus is a freeware 16-bit image processing software with many powerful filtering algorithms. It also allows you to control your camera exposure time through RS-232 (serial) and LPT (parallel) port. In addition there is a file converter for RAW, CRW and CR2 files. Delphinus provides support...


Platforms: Windows

AstroCam is a C based stepper motor control system including both, a Perl and a PHP based webinterface (you can choose one of them to use). You can use it for controlling webcams over the internet or everything else you want to do with a stepper motor. Please send questions, your opinion, feature...


Platforms: *nix, C/C++, BSD

BVHplay is a free, lightweight, Python-based, multi-OS, open-source playback utility for BVH animation files. Features include mouseless camera control, optional grid and camera position displays, frame-by-frame step buttons, and a slider bar.


Platforms: *nix

Build and control futuristic towers to prevent relentless invaders from reaching the end of the maze! Oustanding among the many innovations introduced in WidgetTD, an exclusive Tower View mode allows players to take control of individual defense towers. Players can control powerful Turret Towers,...


Platforms: Mac