Avr Microcontroller

revava is a single pass disassembler that reads in a file containing a program intended for an Atmel AVR microcontroller and outputs assembly code that can be input to an avr assembler. The output of revava contains assembler mnemonics where possible and dc.W declarations where no mnemonic...

AVRcoder is a graphical application builder for those, who are just beginning the journey to the world of 8-bit AVR microcontroller.

SDL REFLEX is the micro kernel of a real time operating system for the AVR microcontroller family. The kernel is especially designed to implement systems described in SDL The Specification and Description Language . Compiler GNU ANSI-C for AVR v.3.3


Platforms: Windows, Mac, Linux

Spark Loader is a boot loader for AVR microcontrollers, it is used for programming flash and EEPROM using a serial link (USB to Serial converters can be used) between your computer and the microcontroller through any free COM (or USB) port. Spark Loader consists of two parts: 1. On - chip boot...


Platforms: Windows

NanoVM is a tiny (less than 8 kB of code including simple native classes and a bootloader) implementation of the Java VM. NanoVM project currently runs on Linux and the AVR microcontroller family. Unix/Linux is supported as the main development and testing platform, whereas the VM is primarily...


Platforms: *nix

AVR Libc is a Free Software project whose goal is to provide a high quality C library for use with GCC on Atmel AVR microcontrollers. Together, avr-binutils, avr-gcc, and avr-libc form the heart of the Free Software toolchain for the Atmel AVR microcontrollers. They are further accompanied by...


Platforms: *nix

AVR-Ada aims to make the Ada part of gcc usable on AVR microcontrollers..


Platforms: *nix

CDK4AVR stands for Cross Development Kit for Atmels AVR RISC processor serie and should support your development with a comprehensive Assembler and C development environment for even this processor familie under Linux. It will present only free of fee tools, so you can use it without risks....


Platforms: *nix

AVR-Eclipse was specially designed as a plugin for the Eclipse Integrated Development Environment which adds toolchain support. This is done through CDT, for the GCC compiler for the Atmel AVR series of microcontrollers, and adds a toolbar button to allow quick upload of produced code to a...


Platforms: Windows

8-bit AVR microcontrollers are getting more and more popular chips for many proposal. They utilise the AVR RISC Architecture, have more than one hundred instructions, most of them executes at single clock cycle. They have also nice peripheral devices like 8/16 bit timer, analogue comparator, PWM,...


Platforms: Windows, Mac, *nix, C/C++, BSD Solaris

avrLab is an IDE (Integrated Devlopment Environment) for the AVR?*A* family of microcontroller from Atmel?*A* Currently it features an advanced editor with syntax highlighting for assembly language. tavrasm is supported as macro assembler and uisp is used for communication with the AVR?*A*....


Platforms: *nix

IMAVR is Atmel AVR 8-bit RISC chip emulator for UNIX. You can run your code before programming to chip. Embedded simple debugger and disassembler. Emulate wide range of AVR chip, wide range of their modules: EEPROM,USART, timers and so on.


Platforms: Mac, BSD, Linux

AVR-Eclipse is a plugin for the Eclipse IDE which adds toolchain support, through CDT, for the gcc compiler for the Atmel AVR series of microcontrollers, and adds a toolbar button to allow quick upload of produced code to a target device.


Platforms: Windows, Mac, Linux

Graphical Microcontroller Programming (GMP) is an expert-in-a-box solution which provides an intuitive user interface giving non-professionals the chance to easily create microcontroller programs by graphical means. Vienna University of Technology.


Platforms: Windows, Mac, Linux

Microcontroller (AVR) based standalone digital light controllers ('dimmers'). The 'Diamond' series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.


Platforms: Windows, Mac, Linux

atmelprog is an Atmel AT89Cx051 microcontroller programmer (device schematics included). atmelprog allows writing and erasing flash, as well as verification of data written..


Platforms: *nix

LCD2USB is a open source/open hardware project. LCD2USB was meant to be cheap and to be made of easily available parts. It is therefore based on the Atmel AVR Mega8 CPU and does not require any difficult to obtain parts like separate USB controllers and the like. The total cost (without display...


Platforms: *nix

i2c-tiny-usb is a open source/open hardware project. Attach any I2C client chip (thermo sensors, AD converter, displays, relais driver, ...) to your PC via USB ... quick, easy and cheap! Drivers for Linux, Windows and MacOS available. The i2c-tiny-usb project is an open source/open hardware...


Platforms: *nix

vAVRdisasm is an AVR program disassembler. The project supports all 136 AVR instructions as defined by the Atmel AVR Instruction Set, revision 0856E-AVR-11/05. This single-pass disassembler can handle Atmel Generic, Intel HEX8, and Motorola S-Record formatted files containing valid AVR program...


Platforms: *nix

The Font Editor allows you to edit bitmap fonts that can be used to design Microcontroller-based systems. The program allows you to import Windows fonts and to save them in multiple formats. The program runs under Windows 9x/XP/7. Packed binary format allows you to reduce the size of...


Platforms: Windows