Automotive Voltage Regulator

PulsePar turns a PC into a multi-channel pulse generator utilizing the parallel port. The period, duty and phase of each channel are adjustable so as to be used in PWM systems as well as in testing servo and stepper (stepping) motors. If you have an old PC, boot it by dos to run PulsePar and...

Crystal CPUID is a useful application that shows you detailed informtation about the processor, the chipset, bios and cache.It contains real information about the processor speed and you can change the processor multiplier and voltage, only recommended if you know what you+re doing because you...

CPU Identification shows you all data relating to your CPU in a simple way.The program will give you data on all types of CPU, the real CPU speed, cache memory, the instructions it supports (like MMX), the voltage it works with, the CPU temperature (if the CPU temperature is high it could be a...


Platforms: Windows

XPC Tools is a system control and administration tool, designed specifically for XPC. Within the totally personalizable interface you can access interesting options like system efficiency monitor, speed adjustment, XPC dynamic overclock, etc.XPC Tools lets you securely increase speed and voltage...


Platforms: Windows

VeeSee® Hardware Information Free Version is a utility designed to display hardware information. The main function of VeeSee® Hardware Information are viewing the current hardware™s information, such as the detailed information of CPU, mainboard, memory, graphics card, display... and keeping...


Platforms: Windows

most4linux project provides a Linux kernel driver for MOST PCI interfaces and userspace programs to test the driver. The driver can be compiled for Linux 2.6 or for the RTDM which works for the realtime extensions RTAI and Xenomai. It also provides a NetServices adaptation layer for the Linux...


Platforms: *nix

Tecnoupman project is a manager/monitor for the UPS Tecnoware Adv. Tecnoware (FIRENZE), only supplies a payment proprietary cable and software. So, even if the UPS is equipped of RS-232 interface its not possible, without spent a lot of money, to manage the UPS directly from the PC. Ive tried...


Platforms: *nix

Tecnoupman project is a manager/monitor for the UPS Tecnoware Adv. Tecnoware (FIRENZE), only supplies a payment proprietary cable and software. So, even if the UPS is equipped of RS-232 interface its not possible, without spent a lot of money, to manage the UPS directly from the PC. Ive tried...


Platforms: *nix

One-Wire Weather is a client program for Dallas Semiconductor / AAG 1-wire weather station kits, providing a graphical (animated) display to monitor outside temperature, wind speed and direction, rainfall, and humidity. Extra temperature sensors may be added. A 1-wire "hub" may be used for...


Platforms: *nix

IOSEMU is a Cisco 7200 emulator that uses JIT to achieve good performance. The project is able to boot real Cisco IOS images. At this time, the emulator I have programmed is able to boot a large number of Cisco IOS releases available for the 7200 platform, including the latest 12.2S and 12.4....


Platforms: *nix

wmxkb showns and controls XKB groups (XFree86 key maps). It can be used as a dockable/swallowed applet with Window Maker, BlackBox and clones (incl. FluxBox), or any window manager that supports swallowing, including gnome-1, kde(kpanel)-1, afterstep, fvwm and clones. Alternatively, you can...


Platforms: *nix

Octavian is a realtime software synthesizer for the GNULinux operating system. Octavian is design is like analog modular synthesizers, so it can be used both as a synth and as an effect processor. Modular tasks separation allows to extend features in a simple way. Modules can be connected...


Platforms: *nix

Libnodave is a library to exchange data with Siemens PLCs. The PLCs of the S7-300 and S7-400 family have a so called MPI (multipoint) interface. This interface is mainly used to program the device, but can also be used to read and write data from and to the PLC. The physical layer of the MPI...


Platforms: *nix

Circuit Aid contains a resistor circuit analysis tool that can build up to an 18 resistor series-parallel circuit. This tool will display voltage, amperage, and power used by every resistor in the circuit by means of mesh analysis. In addition, the program also contains a resistor color band...


Platforms: Mac

Battorox monitors easy and simple the Battery information in your laptop including its capacity, current capacity, current capacity in percent, cycle count, voltage, amps and the flags. It is a 50KB program which is specially simply developed. The program refreshes itself each 5 seconds.Note: OS...


Platforms: Mac

Temperox monitors easy and simple the temperature of your PowerBook/iBook. It monitors the temperature of CPU Bottomside, CPU Intrepid Bottomside, Power Supply Bottomside and the Battery. Additional Temperox monitors the speed of rear left fan, rear right fan and the CPU Core Voltage.Note:There...


Platforms: Mac

MiniBatteryStatus is a small Dashboard widget that monitors battery status. Learn the current charge, remaining life, cycle count, current and maximum voltage.Integrated with Growl to alert you about any relevant power event: low battery, charge complete and power source changes.Universal binary,...


Platforms: Mac

eJuice recipe mixture calculator, free software This e-juice recipe calculator is free. DIY ejuice, mix your own blend of e-liquids with Propylene Glycol (PG), Vegetable Glycerin (VG), H2O and Nicotine and find the desired nicotine strength and flavoring percentage. Measure by volume,...


Platforms: Windows, Windows 7

Qucs is a circuit simulator with graphical user interface. The software aims to support all kinds of circuit simulation types, e.g. DC, AC, S-parameter, Harmonic Balance analysis, noise analysis, etc. Until now there is no or little user documentation available. The Qucs application has an...


Platforms: Windows, Mac, Linux

Electrc 2008 is a professional suite of tools designed to perform common electrical design calculations in compliance with the 2008 National Electrical Code. Electrc 2008 is designed for electrical contractors, engineers, inspectors, estimators, and electrical maintenance personnel. It performs...


Platforms: Windows