Atmel

IMAVR is Atmel AVR 8-bit RISC chip emulator for UNIX. You can run your code before programming to chip. Embedded simple debugger and disassembler. Emulate wide range of AVR chip, wide range of their modules: EEPROM,USART, timers and so on.

revava is a single pass disassembler that reads in a file containing a program intended for an Atmel AVR microcontroller and outputs assembly code that can be input to an avr assembler. The output of revava contains assembler mnemonics where possible and dc.W declarations where no mnemonic...

AVR Libc is a Free Software project whose goal is to provide a high quality C library for use with GCC on Atmel AVR microcontrollers. Together, avr-binutils, avr-gcc, and avr-libc form the heart of the Free Software toolchain for the Atmel AVR microcontrollers. They are further accompanied by...


Platforms: *nix

atmelprog is an Atmel AT89Cx051 microcontroller programmer (device schematics included). atmelprog allows writing and erasing flash, as well as verification of data written..


Platforms: *nix

ISP Programmer is a useful piece of software designed to support programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.


Platforms: Windows

8-bit AVR microcontrollers are getting more and more popular chips for many proposal. They utilise the AVR RISC Architecture, have more than one hundred instructions, most of them executes at single clock cycle. They have also nice peripheral devices like 8/16 bit timer, analogue comparator, PWM,...


Platforms: Windows, Mac, *nix, C/C++, BSD Solaris

AVaRICE is a program which interfaces the GNU Debugger GDB with the AVR JTAG ICE available from Atmel. There are some third party clones of the Atmel jtagice available for purchase via the web for prices much less than the Atmel's offering.


Platforms: *nix

Micro-IDE is a free C compiler for AVR microcontrollers, this compiler is intended to work with AVR micro controllers from ATMEL. The principle is to create assembler code from C code using micro-IDE studio and create assembler hex file to be loaded to the AVR chip using the free avr studio from...


Platforms: Windows

AVR-Eclipse was specially designed as a plugin for the Eclipse Integrated Development Environment which adds toolchain support. This is done through CDT, for the GCC compiler for the Atmel AVR series of microcontrollers, and adds a toolbar button to allow quick upload of produced code to a...


Platforms: Windows

ATmon is a bootloader and monitor tool for the Atmel ATmega32 microcontroller.


Platforms: Windows, Mac, Linux

AVR-Eclipse is a plugin for the Eclipse IDE which adds toolchain support, through CDT, for the gcc compiler for the Atmel AVR series of microcontrollers, and adds a toolbar button to allow quick upload of produced code to a target device.


Platforms: Windows, Mac, Linux

dfu-programmer project is a Device Firmware Update based USB programmer for Atmel chips with a USB bootloader. Supported Chips ??? 8051 Chips ??? AVR Chips ??? at89c51snd1c ??? at90usb1287 ??? at89c5130 ??? at90usb1286 ??? at89c5131 ??? at90usb647 ??? at89c5132 ??? at90usb646 ??? at90usb162 ???...


Platforms: *nix

amforth is an interactive and extendable command interpreter for the Atmel AVR8 Atmega microcontroller family. It features a simple turnkey-solution for embedded use as well. The command language is FORTH. amforth implements an almost compatible ANS94 indirect threading 16bit Forth with very few...


Platforms: *nix

Advanced hexadecimal editor. Few important programs features: 6 color schemes to interpret bytes visually. Every of them tryies to fit some functionality (for example text analyzing) and user preferences Unlimited undo Access to logical disks under Windows NT/2000/XP Disassembler Import and...


Platforms: Windows

PonyProg is a serial device programmer with a user friendly GUI framework available for Intel Linux and Windows. PonyProgs purpose is being able to read from and write to most serial devices. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR, and Microchip PIC micro....


Platforms: *nix

Softgun is a an embedded system simulator. Softgun is known to run linux blob and u-boot for the ARM-9 processors Digi NS9750, Freescale i.MX21 and Atmel AT91RM9200. Also softgun can emulate the ATMega 644 based game console "Uzebox", the Renesas Microcontrollers M32C and R8C. Softgun was written...


Platforms: *nix

avrLab is an IDE (Integrated Devlopment Environment) for the AVR?*A* family of microcontroller from Atmel?*A* Currently it features an advanced editor with syntax highlighting for assembly language. tavrasm is supported as macro assembler and uisp is used for communication with the AVR?*A*....


Platforms: *nix

LCD2USB is a open source/open hardware project. LCD2USB was meant to be cheap and to be made of easily available parts. It is therefore based on the Atmel AVR Mega8 CPU and does not require any difficult to obtain parts like separate USB controllers and the like. The total cost (without display...


Platforms: *nix

i2c-tiny-usb is a open source/open hardware project. Attach any I2C client chip (thermo sensors, AD converter, displays, relais driver, ...) to your PC via USB ... quick, easy and cheap! Drivers for Linux, Windows and MacOS available. The i2c-tiny-usb project is an open source/open hardware...


Platforms: *nix

vAVRdisasm is an AVR program disassembler. The project supports all 136 AVR instructions as defined by the Atmel AVR Instruction Set, revision 0856E-AVR-11/05. This single-pass disassembler can handle Atmel Generic, Intel HEX8, and Motorola S-Record formatted files containing valid AVR program...


Platforms: *nix