Ata Taekwondo

ATA over Ethernet Tools are intended for use in conjunction with an ATA over Ethernet (AoE) driver for a Linux 2.6 kernel. They perform simple tasks like listing available devices, triggering device discovery, and restricting the network interfaces on which AoE is performed. Whats New in This...

ATA over Ethernet driver allows the Linux kernel to use the ATA over Ethernet (AoE) network protocol. Using AoE, a Linux system can use AoE block devices like EtherDrive (R) storage blades. The block devices appear as local device nodes (e.g. /dev/etherd/e0.0). Whats New in This Release:...

Linux ATA RAID HOWTO explains how to setup RedHat on a system with Promise Fasttrack RAID. The Linux ATA RAID HOWTO explains how to set up RAID 1 (disk mirroring) and then install Red Hat Linux on the mirror device. Promise Technology was one of the first companies to come up with...


Platforms: *nix

By using the Linux console edition of Hard Disk Sentinel, it is possible to examine the temperature and health information (and more) of IDE, S-ATA (SATA II also), SCSI and USB hard disks connected to motherboard or external controller cards. The user must be root to use this software or start it...


Platforms: Linux, Linux Console

SilverKeeper is free application from LaCie that automates backups to external storage devices like hard drives, and other removable storage devices that have SATA/eSATA, IDE, ATA/ATAPI, SCSI, USB, or FireWire interfaces.


Platforms: Mac

The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (SMART) built into most modern ATA and SCSI hard disks. In many cases, these utilities will provide advanced...


Platforms: *nix

ATAidle sets the idle timer on ATA hard drives, so they spin down when the period of inactivity has expired. To use it, you must be running FreeBSD with ATAng, so basically FreeBSD 5.1 or newer - alternatively, you can also run it on Linux - its been tested with kernel 2.6.1, but should work...


Platforms: *nix

Automates backups to external storage devices like hard drives, network drives, and other removable storage devices that have IDE, SATA, eSATA, IDE/ATA/ATAPI, SCSI, USB, or FireWire interfaces. SilverKeeper can make bootable backups, volume backups, and folder backups. Backup destinations can be...


Platforms: Mac

Detect and display hard disk drive and SSD health and temperature information without starting the installed operating system. The software can be started from a suitable bootable floppy, CD, pendrive, memory card or USB hard disk to diagnose IDE/SATA hard disks and SSD devices in the system...


Platforms: MS-DOS, Other

This utility access almost all the computer hardware, including PCI (PCI Express), PCI Index/Data, Memory, Memory Index/Data, I/O Space, I/O Index/Data, Super I/O, Clock Generator, DIMM SPD, SMBus Device, CPU MSR Registers, ATA/ATAPI Identify Data, ACPI Tables Dump (include AML decode), Embedded...


Platforms: Windows

This utility access almost all the computer hardware, including PCI (PCI Express), PCI Index/Data, Memory, Memory Index/Data, I/O Space, I/O Index/Data, Super I/O, Clock Generator, DIMM SPD, SMBus Device, CPU MSR Registers, ATA/ATAPI Identify Data, ACPI Tables Dump (include AML decode), Embedded...


Platforms: Windows

Our goal is to develop a full working solver for ATA (with 1 clock) in Python, with MTL to ATA support. The decidability for the emptiness problem was proposed by Lasota and Walukiewicz. The MTL to ATA was proposed by Ouaknine and Worrell.


Platforms: Windows, Mac, Linux

Active KillDisk is a quality security application that destroys data permanently from any computer that can be started from floppy CD USB. Active KillDisk Professional conforms to US Department of Defense clearing and sanitizing standard DoD 5220.22-M. New Wipe function that wipes out all...


Platforms: Windows, MS-DOS

Certainly Data Lifeguard Tools 11.2 is an essential tool because although the user is always worried about the content of software installed in the PC (virus, spyware, etc) you shouldn`t ignore the health of your hard drive, physically, because that`s where all your information is stored.It is a...


Platforms: Windows

Visopsys is an alternative operating system for PC compatible computers. Under development since late 1997, this system is small, fast, and open source. Visopsys features a simple but attractive interface, real preemptive multitasking, and virtual memory. Though it attempts to be compatible in...


Platforms: *nix

Bluewhite64 Linux is an unofficial port of Slackware Linux to the AMD64 architecture. This means that it runs on AMD64 based servers and computers. Bluewhite64 Linuxs goal of this port is to mimic the user experience of the Intel x86 distribution at its best. I will try to include the same...


Platforms: *nix

srcat project can retrieve data from disks once used in a Coraid SR (SATA+RAID) appliance. Whats New in This Release: - This initial alpha release retrieves data from disks that previously composed a clean RAID 5 in a Coraid SR. - The retrieval takes place on a POSIX platform, independently...


Platforms: *nix

cec (Coraid Ethernet Console) client, can connect to any CEC server over raw ethernet. Coraid appliances are examples of CEC servers. Cec is also the name of the client used to connect to cec servers. Cec will run on linux, and bsd flavors supporting bpf. By default the makefile is linux ready...


Platforms: *nix

lshw (Hardware Lister) is a small tool to provide detailed information on the hardware configuration of the machine. Hardware lister can report exact memory configuration, firmware version, CPU version and speed, cache configuration, bus speed, mainboard configuration, etc. On DMI-capable x86...


Platforms: *nix

This is the hdparm project ("hdparm") This project was registered on SourceForge.net on Apr 17, 2005, and is described by the project team as follows: hdparm - get/set ATA/SATA drive parameters under Linux


Platforms: *nix