Asus Tusi M Acpi Bios

openflash is an open source utility to (re)program flash BIOS chips. Initial support will be for the i-opener network appliance under Qnx since there is an immediate need. Usage: qnxflash [-r < file >] [-w < file >] [-v < file >] [-iadlcV] -r Read bios image from chip. -w Write bios image to...

wmacpimon is an ACPI Temperature Monitor, a Windowmaker dockapp that monitors the temperature and Speedstep features in new ACPI-based systems. It supports batteries, automatic shutdown when the power is low, and multiple screens. Whats New in This Release: - All system was rewritten -...

KProbe is an Asus notebook monitor for KDE. It is like the Asus PCProbe software for Windows, but with more options and tuning. It allows you to set the monitor brightness and CPU speed on the fly. It can check KMail via the DCOP interface to check if there are unread messages and enable the...


Platforms: *nix

wmlcd-toshiba is a dockapp that allows you to change the brightness of your toshiba laptop through ACPI. Tested on satellite 5200-801. Installation: acpi files is available in writting mode only for root so you will have to set the bit s on the executable (it s automatically done in the...


Platforms: *nix

Freepia is a small GNU/Linux distribution designed to run on Via Epia-M Mainboards. It currently runs on the M-9000 and M-10000 (ezra and nehemiah cpu) but with some modifications like kernel and X11 modules it should run on others too. The main motivation behind this project is to build a full...


Platforms: *nix

heatload is a tool for Linux which plots the CPU load against the CPU temperature as measured by the ACPI subsystem. Installation: As this package is made with the GNU autotools you should run ./configure inside the distribution directory for configuring the source tree. After that you should...


Platforms: *nix

Cmos password recovery tools decrypts password stored in cmos used to access BIOS SETUP. Works with the following BIOSes: - ACER/IBM BIOS - AMI BIOS - AMI WinBIOS 2.5 - Award 4.5x/4.6x/6.0 - Compaq (1992) - Compaq (New version) - IBM (PS/2, Activa, Thinkpad) - Packard Bell - Phoenix...


Platforms: *nix

Dmidecode project reports information about your systems hardware as described in your system BIOS according to the SMBIOS and DMI standard (see a sample output). This information typically includes system manufacturer, model name, serial number, BIOS version, asset tag as well as a lot of...


Platforms: *nix

USB Launcher project is a couple of basic programs to drive the M&S USB Missile Launcher. ctlmissile does all the actual work. Youll need libusb installed to compile it, but assuming you have that typing "make" should do the trick. You can then do: ctlmissile up ctlmissile down ctlmissile...


Platforms: *nix

KMameRun project is a KDE frontend for M.A.M.E. Here you can comfortably set your default or per game configurations when calling xmame. The xmame binary has to be available somewhere on your system. It features a screenshot preview, search input boxes, and a nice look and feel. Whats New...


Platforms: *nix

gRustibus project is a GNOME M.A.M.E frontend. Its goal is to be feature-rich and easy to use. It shows screenshots, flyers, cabinet photos, and info for your M.A.M.E. ROMs, and allows you to configure each game individually. Most operations can be done using the keyboard. Whats New in This...


Platforms: *nix

Prozessordrossel (German for CPU throttler) throttles your CPU using the Linux ACPI interface of 2.6 kernel. If your CPU supports it, you can change your processor speed (commonly found in Laptops), or throttle it (meaning it will only run a command every other time, thereby using about half...


Platforms: *nix

baterry monitor is a Slovakian ACPI based baterry monitor version with autoconfiguration and support for more then one battery.. battery monitor KDE-Look.org Community Portal for KDE Themes Wallpapers Icons Sounds Screenshots Schemes Skins Skinz Screensavers Splash Screens K-Jofol IceWM Kaiman...


Platforms: *nix

libacpi project is a general purpose shared library for programs gathering ACPI data on Linux..


Platforms: *nix

Yacpi is an acpi monitoring program for Linux. yacpi displays various acpi information like battery status and ac status on notebooks..


Platforms: *nix

libmemory library provides an implementation of M.M. Micheals Safe Memory Reclamation algorithm in C. The Safe Memory Reclamation algorithm provides a convenient way to get rid of the so-called ABA problem in which a value changes from A to B back to A between reads. If, for example, the...


Platforms: *nix

DD-WRT is an alternative firmware for the Linksys WRT54G/GS/GL and the Asus WL-500 deluxe 802.11g wireless routers. DD-WRT was originally based on the Alchemy Firmware from Sveasoft Inc., which is in turn based on the original GPLd Linksys Firmware and a number of other open source projects....


Platforms: *nix

WMChargemon project is a simple WindowMaker dockapp that shows, in a clear way, the battery level and the power status of your ACPI-driven laptop. Low and critical battery levels (on which the applet changes its color) can be set. It is a really simple dockapp, which shows the percent battery...


Platforms: *nix

WMTosh is an ACPI monitoring applet, targeted at toshiba laptops. It can show cpuspeed, temperature, battery level, fan function. WMTosh also allows a limited control of those functions, plus lcd brightnes. As for now limited to linux. I wrote this small dockapp in 2003, when i got my hands...


Platforms: *nix

Sonica is a external USB audio card with digital and analog connectors. Look at what it has to offer:Portable 24-bit/96kHz audio upgrade for laptops and desktopsDigital connector for surround sound receiver or MiniDiscAnalog connector for powered speakers or stereo receiverSupports Dolby Digital...


Platforms: Mac