802 11

Raw Fake AP is a program that emulates valid IEEE 802.11 access points using wireless raw injection. Raw Fake AP application aims to create both beacon and probe response frames and could be used to "hide" real networks from novice wardrivers or for testing wireless intrusion detection systems..

This is a Linux driver for wireless LAN cards based on Intersils Prism2/2.5/3 chipset. The driver supports a so called Host AP mode, i.e., it takes care of IEEE 802.11 management functions in the host computer and acts as an access point. This does not require any special firmware for the...

1.random input data generation2.symbol mapping3.16-QAM modulation4.ofdm signal generation


Platforms: Matlab

802.11b Network Discovery Tools is a gtk tool to scan for 802.11b networks using wavelan/aironet hardware and Linux wireless extensions. It includes the ability to log coordinates of found networks from a GPS device that is NMEA-compatible, and can be linked to a serial port. It currently logs...


Platforms: *nix

Pamvotis is a Wireless LAN Simulator for all the current physical layer extentions of the IEEE 802.11 (IEEE 802.11 a/b/g) standard and for the IEEE 802.11e Draft for Quality of Service in WLANs.


Platforms: Windows, Mac, Linux

libradiate is a 802.11b frame assembly/injection library. Radiate is a small C library designed read, build and write 802.11 frames. As of version 0.2, Radiate only works on linux based systems and needs the following: - A laptop with an 802.11b wireless card with an Intersil Prism 2 chipset...


Platforms: *nix

Kismet application is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting...


Platforms: *nix

Kismet Parse project can be used after kismet has sniffed 802.11 traffic and produced .network files. Kismet Parse is a Perl script that will parse these files to map the MAC addresses of the discovered wireless access point and clients to useful information. The information includes the...


Platforms: *nix

A free 802.11 wireless scanner and connection manager for Mac OS X 10.6 Snow Leopard or later. This will detect access points and clients in ad-hoc mode if the SSID is being broadcasted. It can be used for wireless site surveys, wireless discovery, and to connect to wifi networks. The tool...


Platforms: Mac

The "out-of-box" capabilities of 802.11 Ad-Hoc networking allows data to be sent and received only within the station's immediate range. In contrast to the classical Ad-Hoc network definition, it does not relay packets further on. This software fills exactly this gap, providing an intermediate...


Platforms: Windows

This is an alpha model of a polling based PROFIBUS MAC over a 802.11b PHY layer. A central base station is polling the network members in cyclic order.The PHY layer ist modeled as detailed as possible, including the PLCP and PMD sublayer, the service primitives, the state machines. For connecting...


Platforms: Matlab

ath9k is a 100% free wireless driver for Atheros IEEE 802.11n WLAN based chipsets. Supported chips: ???N*?* AR5418+AR5133 ???N*?* AR5416+AR5133 ???N*?* AR5416+AR2133 ???N*?* AR9160 ???N*?* AR9280 ???N*?* AR9281 Enabling ath9k: To enable ath9k, you must first enable mac80211: Networking --->...


Platforms: *nix

WepAttack is a WLAN open source Linux tool for breaking 802.11 WEP keys. This tool is based on an active dictionary attack that tests millions of words to find the right key. Only one packet is required to start an attack.


Platforms: *nix

Sputnik Gateway Software turns any Intel-based laptop or PC with an 802.11 card and an Internet connection into a full-featured wireless Sputnik Gateway. This means that any wireless-equipped laptop, PC, Macintosh or PDA within range typically about 150


Platforms: *nix

iPig creates a secure "tunnel" that protects your communications (Email, Web, IM, VOIP, calls, FTP, etc.) at any Wi-Fi hotspot or wired network. iPig works with any kind of Internet connection (Wifi, WLAN, wired ethernet). NO configuration required. iPIG shields your data from even the most...


Platforms: Windows

Set up a VPN server in less than 1 minute. Free client software. iPig creates a secure "tunnel" that protects your inbound and outbound communications (Email, Web, IM, VOIP, calls, FTP, etc.) at any Wi-Fi hotspot or wired network. iPig works with any kind of Internet connection (Wifi, WLAN, wired...


Platforms: Windows

KNetworkManager is the KDE front end for NetworkManager. KNetworkManager project provides a sophisticated and intuitive user interface which enables users easily to switch their network environment. The range of functions encompasses the features implemented by NetworkManager daemon. Up until...


Platforms: *nix

ngrep project strives to provide most of GNU greps common features, applying them to the network layer. ngrep is a pcap-aware tool that will allow you to specify extended regular or hexadecimal expressions to match against data payloads of packets. It currently recognizes TCP, UDP, ICMP, IGMP...


Platforms: *nix

GTK ACX Tool provides a tool that displays the status of the ACX100 driver. The GTK ACX Tool displays the status of the Texas Instruments (TI) ACX100 IEEE 802.11 driver. This tool could be used just with driver developed by wlan.kewl.org Project on FreeBSD 5.2 and later versions. It uses GTK+...


Platforms: *nix

The goal of the Linux WLAN project is to develop a complete, standards based, wireless LAN system using the GNU/Linux operating system. The linux-wlan package is a linux device driver and subsystem package that is intended to provide the full range of IEEE 802.11 MAC management capabilities for...


Platforms: *nix