Volts
The function calculates the averaged power spectrum with proper normalization, and even if the signal is given in volts, the value is the power value. Requirements: - MATLAB 7.7 or higher
Platforms: Windows, Mac, *nix, Matlab, BSD Solaris
License: Freeware | Download (58): Power spectral estimation with error bars Download |
This package includes a configurable Simulink model for three different types of DC-DC converters (Buck, Boost and Buck-Boost converters) with a PWM PI controller. The example provided shows a case to boost voltage from 5 volts to 25 volts. It can be used to learn DC-DC converters and their...
Platforms: Matlab
License: Freeware | Size: 727.04 KB | Download (49): Configurable Simulink Model for DC-DC Converters with PWM PI Control Download |
This script can read AFM image data directly from files stored with Nanoscope 6 software(download openNANO5.m to read Nanoscope 5 files). This version can only read two channels and assumes that the first channel is the topography image and the second channel the error/vertical deflection or...
Platforms: Matlab
License: Freeware | Size: 10 KB | Download (49): Open Nanoscope 6 AFM images Download |
PV panel is modeled from the equivalent circuit of PV cells in series and parallel. Each panel is designed with Short circuit current 1 Amp and Open circuit voltage (36x0.54 =) 19.44 Volts at 1000w/sqm, Enter Nos. of such panel to configure in series Ns and sets of panels in parallel Np (Pmp=13.7...
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (49): PV Array Simulink Block Download |
This is set of functions that allow opening of Molecular Imaging atomic force microscope files into Matlab matrix. Unzip the files in one directory and type in Matlab command prompt:y=ReadSTP('pathfilename.stp',buffer number).Matrix y will contain z values of measured surface. Comments will show...
Platforms: Matlab
License: Freeware | Size: 10 KB | Download (43): ReadSTP Download |
This script can read AFM image data directly from files stored with Nanoscope 5 software(download openNANO6.m to read Nanoscope 6 files). This version can only read two channels and assumes that the first channel is the topography image and the second channel the error/vertical deflection or...
Platforms: PHP
License: Freeware | Size: 10 KB | Download (41): Open Nanoscope 5 AFM images Download |
Description:This program allows you to view and control parallel port on hardware level.Features:* It is possible to change each bit in Data Register, Status Register and Control Register. * It is possible to view and control when 5 Volts exist on the pins of parallel port DB-25 connector.
Platforms: Windows
License: Freeware | Size: 46 KB | Download (3831): Parallel Port Viewer Download |
Tecnoupman project is a manager/monitor for the UPS Tecnoware Adv. Tecnoware (FIRENZE), only supplies a payment proprietary cable and software. So, even if the UPS is equipped of RS-232 interface its not possible, without spent a lot of money, to manage the UPS directly from the PC. Ive tried...
Platforms: *nix
License: Freeware | Size: 18.43 KB | Download (99): Tupsmand Download |
Tecnoupman project is a manager/monitor for the UPS Tecnoware Adv. Tecnoware (FIRENZE), only supplies a payment proprietary cable and software. So, even if the UPS is equipped of RS-232 interface its not possible, without spent a lot of money, to manage the UPS directly from the PC. Ive tried...
Platforms: *nix
License: Freeware | Size: 28.67 KB | Download (100): Tecnoupman Download |
Wmsensormon is a doc app for WindowMaker that utilizes lm_sensors to monitor CPU temp, sys temp, fan speeds, and CPU voltage. It offers configurable warnings for overheating, and the sensors displayed are adjustable by the user with command line parameters. Installation: make make install...
Platforms: *nix
License: Freeware | Size: 26.62 KB | Download (119): WMsensormon Download |
The Faber Electroacoustics Toolbox (FEaT) is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for the Mac.FEaT brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and...
Platforms: Mac
License: Demo | Cost: $0.00 USD | Download (93): Electroacoustics Toolbox Download |
Mesh Symbolic Electronic Circuit analysis Mesh electronic circuit analysis is an open source Visual Basic 6 program which is under active development at SourceForge. Please see the download page, for latest source code. Symbolic analysis, is where the resistance and voltage in an electronic...
Platforms: Windows
License: Freeware | Size: 185 KB | Download (72): Mesh Electronic Circuit Analysis Download |
An FEM solution for Laplacian in a bounded regionWritten for Course :-Computational Electromagnetics, Fall 2011Department of Electrical EngineeringIndian Institute of Technology Madras (IITM)Chennai - 600036, IndiaAuthors :-Sathya Swaroop Ganta, B.Tech., M.Tech. Electrical Engg.Kayatri, M.S....
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (43): FEM Laplace Solver Download |
FEM simulation of a parallel plate capacitor to obtain electric field and voltage distributions.Written for Course :-Computational Electromagnetics, Fall 2011Department of Electrical EngineeringIndian Institute of Technology Madras (IITM)Chennai - 600036, IndiaAuthors :-Sathya Swaroop Ganta,...
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (49): FEM simulation of a parallel plate capacitor Download |
The Matlab function convertToArb(data,samplerate,fName) function allows you to turn vector /array data into a waveform format that can be loaded onto Agilent's 3352xAfunction / arbitrary waveform generators (33521A one channel and 33522Atwo channel)This function converts a row or colunm vector...
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (44): Convert Vector to Arbitrary Waveform Download |
The "Dynamic Signal Analyzer 34411A" program turns the following Agilent DMMs into Dynamic signal analyzers: 34411A, 34410A, and the L4411A.The program sets up the DMMs as digitizers, fetches the readings, and performs an FFT on the readings. The FFT is plotted with dBV on the y axis and...
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (47): Dynamic Signal Analyzer 34411A Download |
FEM simulation of voltage and electrical field distributions in a microstripWritten for Course :-Computational Electromagnetics, Fall 2011Department of Electrical EngineeringIndian Institute of Technology Madras (IITM)Chennai - 600036, IndiaAuthors :-Sathya Swaroop Ganta, B.Tech., M.Tech....
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 10 KB | Download (43): FEM simulation of microstrip Download |
SimPowerSystems(SPS) and Simscape are used to calculate losses in a 3-phase, 3-level inverter.From a +/- 1800 volts DC source, a 400-kW, 3-phase 3-level inverter delivers variable power to adistribution power system. The inverter output is connected to the 25-kV, 40 MVA, 50-Hz systemthrough a...
Platforms: Matlab
License: Shareware | Cost: $0.00 USD | Size: 1.2 MB | Download (44): Loss Calculation in a 3-Phase 3-Level Inverter Using SimPowerSystems and Simscape Download |
The EJS Lennard-Jones Potential model shows the dynamics of a particle of mass m within this potential. You can drag particle to change its position and you can drag the energy-line to change its total energy. The Lennard-Jones potential function is a reasonably accurate model of interactions...
Platforms: Mac
License: Shareware | Cost: $0.00 USD | Size: 10.24 KB | Download (36): Lennard-Jones Potential Model For Fac Download |
XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 1 stereo output channels. Features - Connectivity USB Type B - Powered by computer via the USB port - P4 Molex Connectivity - External power supply 7-36 volts, 2.3 watts to 3.2 watts...
Platforms: *nix
License: Shareware | Cost: $0.00 USD | Size: 30.72 KB | Download (63): 8 Sounds USB Download |