Synchronous Motor

Permanent Magnet synchronous motor was modeled with the help of vector control technique and it was also made sensorless based on sliding model observer (SMO). controller parameters are given after tuning it with conventional gradient descent method.

This file simulates the model of permanent magnet synchronous motor and compare it with the model provided with Matlab. All the major signals required in PMSM drive have been extracted. The model provides a detailed look on the inside of PMSM. The parameter used are given in the included m file...

This is a complete simulink model of a three phase synchronous model with the effect of load.A complete analysis of a three phase synchronous motor is done.


Platforms: Matlab

The advantages of vector control provide variety of control choices in the PMSM drives. The simplest control strategy is the Zero d_axis current control (Constant Torque Operation) which is implemented in this model. The transient responses of torque, speed and 3-phase motor current are simulated.


Platforms: Matlab

PMSM was modeled in simulink with the help of model adaptive reference system. The position of rotor and speed can be estimated with out help of sensor technology. This is developed with the help of space vector pulse width modulation (SVPWM). Modeling is done with the help of d-q axis references.


Platforms: Matlab

Motor is a text mode based programming environment for Linux. It consists of a powerful editor with syntax highlight feature, project manager, makefile generator, gcc and gdb front-end, etc. Deep CVS integration is also provided. With this release of motor you can organize your project files...


Platforms: *nix

The 3 phase induction motor is modeled to accept the No-Load & Blocked rotor test results for determining the equivalent circuit parameters. The model is used to simulate various performance characteristics. these characteristics can be viewed using a scope.


Platforms: Matlab

Stepper Motor Control with GUI in Matlab 7.1.For more information, visit: http://www.matpic.com


Platforms: Matlab

This is the demo file for video demo:http://www.mathworks.com/products/demos/sl...tor-video-demo/and "Seth on Simulink" blog post "PID Control Made Easy":http://blogs.mathworks.com/seth/The demo shows the new PID Controller block in Simulink and new PID Tuner in Simulink Control...


Platforms: Matlab

DC motor Control using lag compensation and PIDTo customize this code you just need to:1- Change the values of DC motor constants2- Determine settling time, PO% and SSE and Change the zeros of lag compensation3- Tune the gains of PID controller


Platforms: Matlab

This model simulates the position control of a DC motor. Parameters can be changed from the model properties tag.


Platforms: Matlab

Stepper Motor ToolBox gather several funtion to create velocity profiles and render simulations using stepper motor dinamics. The stepper model was developed in simulink and solved using ODEs.


Platforms: Matlab

This script can be used to control motors connected to Roboteq motor controller. Right now the code is for controllers which are accessed over a local tcp/ip network. Replace the ip address with yours. That should be enough to run the motors.


Platforms: Matlab

This project aims to demonstrate speed control of aDC series motor. It involves the use of armature voltage control,to control the speed of the motor. The speed of the motor iscontrolled for a typical speed profile of a washing machine. ThePID controller of the motor is optimized for a good...


Platforms: Matlab

Program given here computes the discrete transfer function of a DC motor (Example taken in this case) using pseudo inverse technique. The input and output data for any single input single output system can be used to find out the discrete transfer function of that system.


Platforms: Matlab

In this model we have design a fullcontrol(Armature and Field) of DC Motor.


Platforms: Matlab

Inductance of the armature L = 0,1H, resistance of the armature R = 2 W, voltage U = 110 V, load torque mz = 0,02 Nm, momentof inertia J = 0,1 kg/m2 and electro-mechanical constant of the motor k = 0,3 Vs. Create it asseparate block (subsystem) with one input (voltage) and two outputs (angular...


Platforms: Matlab

design SVPWM for 3 level inverter for speed control of Induction motor based on V/F methodV/F control of Induction motor with SVPWM based 3-level inverter


Platforms: Matlab

This Plugin is designed to manage motor sport races and championships and allow users to predict the outcome of the races. Points are awarded based on users' predictions and the actual finishing order of the race.Most motor sport competition types are supported. Basically any event that involves...


Platforms: PHP

3D combat racing game. In the beginning of 21th century global energy crisis wakened World War III. A lot of cities were destroyed and people abandoned them searching for better life. Now these abandoned cities are used as race tracks for a new kind of popular entertainment - Apocalypse Motor...


Platforms: Windows, Windows 8, Windows 7, Windows Server