Single Phase Synchronous Motor

This is a complete simulink model of a three phase synchronous model with the effect of load.A complete analysis of a three phase synchronous motor is done.

Analogue circuits were replaced by digital technique for the firing of the single phase inverter switches.EEPROM (Electrically Erasable Programmable Read-Only Memory) was used to store the switching scheme that controlled the inverter. Requirements: - MATLAB 7.4 or higher - MATLAB's SimPowerSystems

This model simulates unipolar sinosoidal based single phase inverter


Platforms: Matlab

A single phase motor is is operated using a quasi square wave inverter with third harmonic cancellation. A dead band of 60 degree has eliminated almost all the third harmonic component.


Platforms: Matlab

The model simulates the three level diode clamped single phase inverter. Power GUI shows the FFT analysis


Platforms: Matlab

The model simulates single phase bridge rectifier with resistive and inductive load. simulation also demonstrate the role of free wheeling diode. Single phase pulse generator was developed to generate the pulses at required firing angle.


Platforms: Matlab

This model simulates quasi square wave based single phase inverter. Pulse width can be adjusted


Platforms: Matlab

Single Phase SPWM inverter modelled using simulink.simulink beginners find it easy to understand and implement.


Platforms: Matlab

The model simulates the single phase square wave inverter


Platforms: Matlab

Single phase half bridge voltage source inverter with R load with suitable waveform


Platforms: Matlab

The 3 phase induction motor is modeled to accept the No-Load & Blocked rotor test results for determining the equivalent circuit parameters. The model is used to simulate various performance characteristics. these characteristics can be viewed using a scope.


Platforms: Matlab

A single phase cyclcoconverter is designed with center tapped transformer.By giving the proper input command, the output voltage and frequency can be controlled.


Platforms: Matlab

Hello,Can anyone help me debug my "Single Phase Inverter" model?I have it semi-made, i have pwm features in there, but i just can't get it to work.I need to achieve a Pure Sine Wave, at the output.And also at variable frequencies. I have a transformer attached at the output too, to achieve...


Platforms: Matlab

This is a simple method to convert Single-Phase to Three-Phase with minimum number of switches for low power applications.Check the output currents and voltages.Reference title is included in this submission


Platforms: Matlab

Permanent Magnet synchronous motor was modeled with the help of vector control technique and it was also made sensorless based on sliding model observer (SMO). controller parameters are given after tuning it with conventional gradient descent method.


Platforms: Matlab

Single-Phase half-controlled bridge rectifier(ALPHA=120)


Platforms: Matlab

This file simulates the model of permanent magnet synchronous motor and compare it with the model provided with Matlab. All the major signals required in PMSM drive have been extracted. The model provides a detailed look on the inside of PMSM. The parameter used are given in the included m file...


Platforms: Matlab

Analogue circuits were replaced by digital technique for the firing of the single phase inverter switches.EEPROM (Electrically Erasable Programmable Read-Only Memory) was used to store the switching scheme that controlled the inverter.


Platforms: Matlab

The advantages of vector control provide variety of control choices in the PMSM drives. The simplest control strategy is the Zero d_axis current control (Constant Torque Operation) which is implemented in this model. The transient responses of torque, speed and 3-phase motor current are simulated.


Platforms: Matlab

In this model we should first use 3phase source to convert it to single phase source for feed to armature and after we have the logic of control...


Platforms: Matlab