Simpowersystems

A SimPowerSystems model is used to calculate switching and conduction losses in a buck converter.A 12-kW buck converter is implemented by a half-bridge IGBT detailed model. Based on the thermal characteristics of the selected IGBT module, both switching and conduction losses are calculated....

SimPowerSystems(SPS) and Simscape are used to calculate losses in a 3-phase, 3-level inverter.From a +/- 1800 volts DC source, a 400-kW, 3-phase 3-level inverter delivers variable power to adistribution power system. The inverter output is connected to the 25-kV, 40 MVA, 50-Hz systemthrough a...

This package includes a configurable Simulink model for three different types of DC-DC converters (Buck, Boost and Buck-Boost converters) with a PWM PI controller. The example provided shows a case to boost voltage from 5 volts to 25 volts. It can be used to learn DC-DC converters and their...


Platforms: Matlab

Numerical Computing with Simulink, Volume 1, is a sequel to Cleve Moler's "Numerical Computing with MATLAB". The book is designed for an introductory course on simulation and for practicing engineers who need to create simulations and also want to work smarter.The book starts with simple examples...


Platforms: Matlab

Simulink is used for as GUI and matlab solves resulting equations. Requires SimPowerSystems!


Platforms: Matlab

This demo illustrates use of both SimPowerSystems and Simscape to model a On-Load Tap Changing (OLTC) 120/25 kV transformer regulating voltage on a three-phase 25-kV distribution network.The demo is similar to the power_OLTCregtransformer demo of SimPowerSystems. However, instead of using...


Platforms: Matlab

When a high voltage transmission line crosses remote areas where no distribution network is available, it is possible to tap power from the overhead ground wires (OHGW) protecting the line against lighting strokes. Hydro-Quebec developed the IVACE technology to provide power to telecommunication...


Platforms: Matlab

The FFT output can suply voltage output waveform and current waveforms. Requirements: - MATLAB 7.7 or higher - MATLAB's SimPowerSystems


Platforms: Windows, Mac, *nix, Matlab, BSD Solaris

Analogue circuits were replaced by digital technique for the firing of the single phase inverter switches.EEPROM (Electrically Erasable Programmable Read-Only Memory) was used to store the switching scheme that controlled the inverter. Requirements: - MATLAB 7.4 or higher - MATLAB's SimPowerSystems


Platforms: Windows, Mac, *nix, Matlab, BSD Solaris

The files cover areas like detailed circuits, harmonics study, data sheets for various electronic devices used in the project and a SIMULINK model of the proposed regulator model. Requirements: - MATLAB 7.2 or higher - MATLAB's Simulink - MATLAB's SimPowerSystems


Platforms: Windows, Mac, *nix, Matlab, BSD Solaris

The files include a Simulink(R) library with two different models, modeled with basic Simulink blocks, with different details. The more detailed one includes more outputs like motor temperature and power. There is also another model based of the physical modelling tools SimPowerSystems and...


Platforms: Matlab

This file contains a hybrid-electric vehicle model built using Simscape, SimElectronics, SimDriveline, and SimPowerSystems that can be configured for system-level tests or power quality analyses. Model variants for the electrical, battery, and vehicle dynamics systems can be selected using...


Platforms: Matlab

These files were used in the webinar on Modeling Mechanical, Electric and Hydraulic Systems in Simulink, which was broadcast on April 6th, 2006.In this webinar (Now Recorded and available from our website), we show how SimulinkdlT« enables faster and more effective development of controlled...


Platforms: Matlab

Included are demonstration files that were used, or referred to in the webinar "Electrical & Mechanical Modeling in SimulinkdlT«" designed to introduce attendees to electrical and mechanical modeling in Simulink. The webinar demonstrated the use of the tools SimMechanicsd-OC?D? and...


Platforms: Matlab

The demonstration shows different operating modes of the HEV over one complete cycle: accelerating, cruising, recharging the battery while accelerating and regenerative braking.The Electrical Subsystem is composed of four parts: The electrical motor, the generator, the battery, and the DC/DC...


Platforms: Matlab

The demonstration shows different operating modes of the FCV over one complete cycle: accelerating, cruising, recharging the battery while accelerating and regenerative braking.The FCV Electrical Subsystem is composed of four parts: The electrical motor, the battery, the fuel cell and the DC/DC...


Platforms: Matlab

The models in this zip file can be used as tutorial examples. They are the models used in the Physical Modeling Hands-on Workshop events offered by the MathWorks.The examples here are models in Simscape, SimMechanics, SimDriveline, SimElectronics, SimHydraulics, and SimPowerSystems that you can...


Platforms: Matlab