Relay Controller

School Finance Controller is specially developed for school & other institutional organization. This fulfills all the requirements related to accounts up to Profit & Loss and Balance Sheet. Fees module is very easy in use and very fast in operating. Bank Challan for Students can also be printed...

Relay Timer R16X is programmable timer software for setting timing features of relay. It works with 16-channel relay boards of National Control Devices (NCD) . It supports Com Port and Network connection between PC and relay board. The connection status is detected and shown continuously. It...

USB Storage Controller is a handy and reliable application designed to enable or disable USB access. Using this tool you can activate or disable USB Storage From the Computer Without affecting anything connected.


Platforms: Windows, 2003, Windows Vista, XPX64, 2008, 7, 7x64, 2008x64

Applilet is an automatic device-driver generation tool for NEC micro-controller series. The initialization of the register of function modules (peripheral) can be easily set through GUI. Although the operation of generated codes have been verified, please evaluates them enough by your own...


Platforms: Windows

MCE Controller enables programmatic control of the user interface via a TCP/IP connection. To put it simply, MCE Controller, allows you to simulate a press of any button on the MCE IR remote control by sending a text command to a TCP/IP port on the MCE machine. For example if MCE Controller...


Platforms: Windows

Control your layout with the easy-to-use Big Bear Rail controller program. Operates in conjunction with your hand-held controllers so that two people or more can operate your layout. This program controls all your routes, turnouts, multi-aspect signals and most important, your locomotives. The...


Platforms: Windows, Other

serial relay board control class allows you to control the serial 8-fold relay board from www.conrad.ch (Order nr 967720).


Platforms: Windows, Mac, *nix, PHP, BSD Solaris

Most of the time we use Simulink to simulate a PID controller. But this files run it as a Matlab code.Extract the files to the working directory and just run the file PID_ctrl_call.m.You can vary the PID tuning parameters in the file pid_ctrl.m and see what will happen.


Platforms: Matlab

When a fault occurs in any portion of the power system network, the primary relay must act first. But to be on the safer side a 'Back-Up' relay to the 'Primary' relay is also provided with a proper discrimination time in their operation. Discrimination time is provided so as to allow the primary...


Platforms: Matlab

This is the demo file for video demo:http://www.mathworks.com/products/demos/sl...tor-video-demo/and "Seth on Simulink" blog post "PID Control Made Easy":http://blogs.mathworks.com/seth/The demo shows the new PID Controller block in Simulink and new PID Tuner in Simulink Control...


Platforms: Matlab

It's a servo controller for six servo motors. It can be used to control a antropomorphic arm with six motors. For a correct execution, it must select the motors following this table: #servo - char to use for the motor selection 1 a 2 b 3 c 4 d 5 e 6 fThe microcontroller must use the same char. It...


Platforms: Matlab

This technique is used in many control application and here i used it to tune the PID controller


Platforms: Matlab

This simulation illustrates the effects of the fixed-pointcomputations on the closed-loop precision for a 16-bits PID controller.The rounding mode, the point where the truncations take place and theformat width for the internal variable have a significant action on theclosed-loop permanent...


Platforms: Matlab

This file illustrates the effect of a properly designed proportional integral controller on the performance of Electrohydraulic servoactuators. The description of construction, operation and mathematical modeling of the Electrohydraulic servoactuator and steps of design of the PI controller are...


Platforms: Matlab

1) Std 2 in 1 out Fuzzy Controller ,2)semi-active suspension


Platforms: Matlab

Designing a Controller and obtaining the Controller Function by rootlocuse method


Platforms: Matlab

This script can be used to control motors connected to Roboteq motor controller. Right now the code is for controllers which are accessed over a local tcp/ip network. Replace the ip address with yours. That should be enough to run the motors.


Platforms: Matlab

This is a general purpose controller that I have built using the Fuzzy Logic Rules. You don't need to have any mathematical background in fuzzy logic to run this model.You don't need to have fuzzy logic toolbox to run it aswell.It contains both linear and a nonlinear examples. It also has a read...


Platforms: Matlab

Digital version of Fractional-Order PID Controller (DFOC) of the form:C(s) = K + Ti/s^m + Td*s^d for given sampling period Ts [sec].For more details and help write:>> help DFOC


Platforms: Matlab

File contains the design of a digital over current relay block (Directional and Non Directional) d-deOCt a key component of any protection scheme d-deOCt and its performance on SIMULINKdlT«. A 400V industrial distribution power system is used as a tutorial to simulate and test over-current...


Platforms: Matlab