Pnp Sensors

About Teabox Bridge Application The Teabox is a high-speed, high-resolution, sensor interface for connecting sensors or custom interfaces to your computer as a digital audio (S/PDIF) signal. The Teabox Bridge Application decodes the digital audio signal and then sends to other applications, or...

Check My Temp gives a continuous update of the individual temperature sensors and fan speeds inside your Mac. We have submitted an update that fixes the slowdown on certain computers. It should be available shortly. • Run in background mode with the info displayed in the menu bar. • See the...

Wireless sensor networks offer an entire new field open for research and development. These types of networks conceptually offer many exciting features including scalability, self-configuration, self-healing, multicast routing, and easy deployment.For these reasons, they are well suited for a...


Platforms: Matlab

This GUI demonstrates the use of fuzzy logic to control the steering of a car. Two sensors, one on each side of the car, detect the distances from the pavement, with which the "error" critereon is calculated. This, along with the change in error make the two inputs for our fuzzy system. The...


Platforms: Matlab

Earth albedo is the sunlight reflected off the Earth's surface. The Earth albedo induces power in solar cells on spacecrafts just like direct sunlight. The Earth Albedo Toolbox may be used to calculate the amount of Earth albedo arriving at an object in space, maintaining information of direction...


Platforms: Matlab

These functions have been developed to watch and analyze EEG/Video/Accelero(3A)/Magneto(3M) data in the context of the Epimouv/Capametrim project.The project aim is to recognized epileptic movement disorders by determining regions of interests on the video and classify motor manifestations thanks...


Platforms: Matlab

Engineers who use SimulinkdlT« and StateflowdlT« within Model-Based Design often need to integrate state machines and control logic designed in Stateflow with Simulink blocks, subsystems, and components. Common tasks include calling a Lookup Table block from Simulink to perform...


Platforms: Matlab

This file creates an interactive GUI for navigating and plotting Simscape simulation data. You can navigate the simscape.logging.Node object using a tree browser, and the data is plotted for you automatically. This makes it easier to plot the different physical quantities in your network without...


Platforms: Matlab

These files can be used to simulate a sound source moving in a reverberant environment and generate the corresponding samples of audio data received at one or more microphones. In addition, the user can define the desired level of environmental reverberation time in a simple and accurate manner....


Platforms: Matlab

This function finds the velocity of a 2-dimensional planar wave from at least 2 sensors, by specifying its location (x,y) or (lon,lat) and its respective arrival time.It returns the speed and direction (or tracking if coordinates were given):>> [VEL,DIR] =...


Platforms: Matlab

This model extends the "f14" model which is a demo in Simulink to include a GUI and simple sensor failure handling.MathWorks products required to run the model:MATLABSimulinkStateflowTo use model:1. Open aerogaugef14.mdl. The GUI, "aerogaugegui", will open automatically.2. Click "Start Sim" on...


Platforms: Matlab

PHP tool to display graphs and stats based on temperature readings stored in MySQL from 1-wire or any source of data. Also supports alarms, mobile access, and logging data from digitemp. Works in any browser.Features of DTGraph - Digitemp/MySQL Graphing Tool:- Provides scripts to record...


Platforms: PHP

The oscmex project provides a library of functions for MATLAB that enable the sending and receiving of Open Sound Control (OSC) formatted messages between a MATLAB process and other OSC-enabled endpoints on a network. oscmex is primarily used in experimental prototypes characterized by use of...


Platforms: Mac

Wmsensormon is a doc app for WindowMaker that utilizes lm_sensors to monitor CPU temp, sys temp, fan speeds, and cpu voltage. It offers configurable warnings for over heating, and the sensors displayed are adjustible by the user with command line param


Platforms: *nix

ZBar is an open source software suite for reading bar codes from various sources, such as video streams, image files and raw intensity sensors. It supports many popular symbologies (types of bar codes) including EAN-13/UPC-A, UPC-E, EAN-8, Code 128, Code 39, Interleaved 2 of 5 and QR Code....


Platforms: *nix

Superkaramba ?*A* lm_sensors ?*A* hddtemp ?*A* p7zip (for opening archive) ?*A* kwrite (for notes, you can use any other editor) lm_sensors: ?*A* You can install lm_sensors with "emerge -Dva lm_sensors" or "apt-get install lm_sensors" or something else as root. ?*A* Configure sensors with...


Platforms: *nix

WaVeSim (Water Vehicle Simulator) is a simulation environment to test water vehicles' on-board software. It simulates surface and underwater vehicles' dynamics and acoustic signal propagation. Virtual sensors and 3D visualization system are available.


Platforms: *nix

The Gauge project uses code from TzClock to display a speedometer type gauge for various different values. At the moment these values are, CPU use, sensors and weather.


Platforms: *nix

This module contains lowlevel-routines for the communication with the ELV Weatherstation WS2000 PC connected to a serial port. Following functions are implemented: open_ws ($port) opens the serial port and checks initial response, returns 1 on success, 0 on failure send_ws ($cmd,$par) send a...


Platforms: *nix

XWii is a driver application built on top of the Wiiuse library .It interprets signals from the Nintendo Wii Remote into X11 keyboard and mouse input, allowing you to control all the programs on your computer with the wiimote. What you need to get started: * A bluetooth adapter that works under...


Platforms: *nix