Nvidia Nforce Networking Controller

MCE Controller enables programmatic control of the user interface via a TCP/IP connection. To put it simply, MCE Controller, allows you to simulate a press of any button on the MCE IR remote control by sending a text command to a TCP/IP port on the MCE machine. For example if MCE Controller...

SkaDate - Fully customizable social networking software with stable platform, clean design, solid architecture, overwhelming number of features, delighting design templates, and unheard customer support. This community site software package gets constantly upgraded thus we keep it stable and make...

Control your layout with the easy-to-use Big Bear Rail controller program. Operates in conjunction with your hand-held controllers so that two people or more can operate your layout. This program controls all your routes, turnouts, multi-aspect signals and most important, your locomotives. The...


Platforms: Windows, Other

Chipmunk AV Controller is a .NET application capable of controlling audio visual equipment, home cinemas and performing general automation tasks. Chipmunk enables the easy creation of macros and commands to control devices via plugins. Chipmunk can also receive incoming events from equipment....


Platforms: Windows

Nvidia Drivers Update Utility For Windows 7 64 bit updates your Windows 7 x64 (64 bit) drivers for Nvidia Laptops automatically. It will scan your Windows 7 first then download and install 64 bit Nvidia official drivers to let your Nvidia Laptop work properly. The Nvidia Drivers Update Utility...


Platforms: Windows

Most of the time we use Simulink to simulate a PID controller. But this files run it as a Matlab code.Extract the files to the working directory and just run the file PID_ctrl_call.m.You can vary the PID tuning parameters in the file pid_ctrl.m and see what will happen.


Platforms: Matlab

This is the demo file for video demo:http://www.mathworks.com/products/demos/sl...tor-video-demo/and "Seth on Simulink" blog post "PID Control Made Easy":http://blogs.mathworks.com/seth/The demo shows the new PID Controller block in Simulink and new PID Tuner in Simulink Control...


Platforms: Matlab

It's a servo controller for six servo motors. It can be used to control a antropomorphic arm with six motors. For a correct execution, it must select the motors following this table: #servo - char to use for the motor selection 1 a 2 b 3 c 4 d 5 e 6 fThe microcontroller must use the same char. It...


Platforms: Matlab

This technique is used in many control application and here i used it to tune the PID controller


Platforms: Matlab

This simulation illustrates the effects of the fixed-pointcomputations on the closed-loop precision for a 16-bits PID controller.The rounding mode, the point where the truncations take place and theformat width for the internal variable have a significant action on theclosed-loop permanent...


Platforms: Matlab

This file illustrates the effect of a properly designed proportional integral controller on the performance of Electrohydraulic servoactuators. The description of construction, operation and mathematical modeling of the Electrohydraulic servoactuator and steps of design of the PI controller are...


Platforms: Matlab

1) Std 2 in 1 out Fuzzy Controller ,2)semi-active suspension


Platforms: Matlab

Designing a Controller and obtaining the Controller Function by rootlocuse method


Platforms: Matlab

This script can be used to control motors connected to Roboteq motor controller. Right now the code is for controllers which are accessed over a local tcp/ip network. Replace the ip address with yours. That should be enough to run the motors.


Platforms: Matlab

This is a general purpose controller that I have built using the Fuzzy Logic Rules. You don't need to have any mathematical background in fuzzy logic to run this model.You don't need to have fuzzy logic toolbox to run it aswell.It contains both linear and a nonlinear examples. It also has a read...


Platforms: Matlab

Digital version of Fractional-Order PID Controller (DFOC) of the form:C(s) = K + Ti/s^m + Td*s^d for given sampling period Ts [sec].For more details and help write:>> help DFOC


Platforms: Matlab

This code uses gui to demonstrate the step response for DC Motor Position system with PID controller which can be edited by three sliders. The edit texts can be edited by user, after editing press plot pushbutton to plot the response of new current system. Pushbutton (Reset) returns to the...


Platforms: Matlab

PHPOpenMvc is web development framework PMVC (PHP Model View Controller).


Platforms: PHP

Prsaar Social Networking Platform is now renamed to Colourpark.


Platforms: PHP

nVidia Solaris Display Driver is the OpenGL nVidia support for graphic cards on Solaris operating system. Install: Type "sh NVIDIA-Solaris-x86-180.44.run" to install the driver, then edit your X config file as appropriate.


Platforms: *nix