Netflow Sensor

In many practical signal processing problems, the objective is to estimate from measurements a set of constant parameters upon which the received signals depend.For example, high-resolution direction-of-arrival (DOA) estimation is important in many sensor systems such as radar, sonar, electronic...

We would like to rise water temperature with a heater. Oulet temperature must be equal to the set point temperature (80dlT-C). Proportional (P), Proportional-Integral (PI) and Proportional-Integral-Derivative (PID) control are used and the respective results are compared. Inlet water temperature...

We would like to rise water temperature with a heater. Oulet temperature must be equal to the set point temperature (80dlT-C). Proportional-Integral-Derivative (PID) control is used. Inlet water temperature is equal to 20dlT-C. Water flow is equal to 10 m3/hr. Tank volume is equal to 100 m3....


Platforms: Matlab

Function target_image_gen use Vx, Vy and Vz to create a movie simulation of a targets aproach. I edit this demo to have differents movies to test a target tracking system I made in simulink.Function target_gen creates a target (11,11) based on value x.If x


Platforms: Matlab

When a person writes across a board, he/she positions his/her arm in a comfortable writing configuration by moving his/her body rather than reaching out the arm.The same situation happens in many case such as people transporting a heavy object cooperatively. Therefore, when a mobile manipulator...


Platforms: Matlab

Identifies the National Instruments NI-USB6008 DAQ and collects the data from the sensor through the DAQ. In this example, it collects 10 seconds worth of data from a pressure transducer and outputs the mean for each time the function is called.These functions were used in an Instrumentation lab...


Platforms: Matlab

Vernier SensorDAQ (www.vernier.com/sensordaq) is a USB data-acquisition interface. It can be used to gather data from Vernier sensors (www.vernier.com/sensors) and also includes terminals for analog and digital I/O.This support package extends the capabilites of Data Acquisition Toolbox (R2011b...


Platforms: Matlab

This is the starter kit for the Spring 2010 MATLAB Programming Contest, April 28-May 5 2010. For more information see the rules:My Webpage


Platforms: Matlab

This is a MATLABdlT« instrument driver for use with v2.0 of the Instrument Control Toolboxd-OC?D? and higher. It supports the Rohde & SchwarzdlT« NRT-Zxx sensors for the NRT power reflection meter.It is a MATLAB VXIplug&play instrument driver that requires the Rohde & Schwarz rsnrtz...


Platforms: Matlab

This model extends the "f14" model which is a demo in Simulink to include a GUI and simple sensor failure handling.MathWorks products required to run the model:MATLABSimulinkStateflowTo use model:1. Open aerogaugef14.mdl. The GUI, "aerogaugegui", will open automatically.2. Click "Start Sim" on...


Platforms: Matlab

NfSen is a graphical web based front end for the nfdump netflow tools. NfSen allows you to: *Display your netflow data: Flows, Packets and Bytes using RRD (Round Robin Database). *Easily navigate through the netflow data. *Process the netflow data within the specified time span. *Create...


Platforms: PHP

YASeMI (Yet Another Security Monitoring Interface) consists of a Web interface that can be of aid to SysAdmins and Security Admins, in detecting possible anomaly or intrusion behaviour in their network, based on Netflow data their routers emit.


Platforms: PHP

This color matching tool is ideal for digital SLR camera users looking to match colors between their monitors and photo prints. With the EasyPIX software you can match the monitor???*a*?s color and brightness with that of the photo paper and then create a monitor profile with the bundled EX1...


Platforms: Mac

gnusb is an open source USB-Sensor Box. gnusb is a combined hardware/software project to provide a platform upon which users can build their own USB input/output devices, primary for connecting Max/MSP and puredata to the outside world via sensors and digital i/o. It is built around an ATMEL...


Platforms: Mac

This circuit implements a 4-bit dual-code to Gray-code converter. Note that only one bit changes from one code word to the next in the Gray code. One common use for the Gray-code is in position or angle-encoders, because the position (rotation) error due to misalignment is at most one bit. There...


Platforms: Mac

XSensors project is designed to display all the related information from motherboard sensors. This information is gathered via lm_sensors, the software drivers that retrieves the sensor information from the hardware.


Platforms: *nix

Brick Remote is a Gnome application to control the LEGO RCX brick. It utilizes LNP to communicate with the RCX. It allows to control the three motor outputs and to monitor the three sensor inputs. It requires brickOS on the RCX and comes with a small


Platforms: *nix

A c++ user-mode Linux driver for the Boltwood Cloud Sensor II (a weather station designed for astronomers). Features . Better support for memory dumps . Changes to compile with gcc 4.4


Platforms: *nix

Stager is a system for aggregating and presenting network statistics. Stager is generic and can be customized to present and process any kind of network statistics. The backend collects data and stores reports in a database, automatically handling the aggregation of hourly statistics into days,...


Platforms: *nix

check_openmanage is an intelligent plugin. It will by itself discover which hardware components are present in the server and monitor them. It does this because it assumes that most systems administrators are lazy, and are not interested in configuring the plugin to match different server models,...


Platforms: *nix