Linksys Firmware

The Linksys X2000 is a high-speed ADSL gateway that can be set up for both cable and DSL connection. This article will show you the product features and specifications of the Linksys X2000.

Aiming at solution for typical firmware malfunction of Maxtor 541DX (2B020H1 2B015H1 2B010H1), which may manifest itself as follows: 1. HDD is not identified or identified by its factory alias "Maxtor Athena"; 2. HDD starts the motor and then hangs.

PSP Firmware is a free firmware updating for the Sony PSP console. Obviously it is exclusively for owners of this console. The model for this program is the PSP-1001 K.IMPORTANT NOTE: Do not update your PSP system via this firmware if your console is different to PSP-1001 K.Check the author`s...


Platforms: Windows

OpenPCD is a free and open RFID reader reference design platform. The OpenPCD firmware is software that runs in OpenPCDs AT91SAM7 ARM controller, and connects the RFID reader hardware (CL RC632 ASIC) with the Host PC via USB. The Firmware includes a custom USB device stack and drivers for the...


Platforms: *nix

Wireless-G is the upcoming 54Mbps wireless networking standard that's almost five times as fast as the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country +¦ but since they share the same 2.4GHz radio band, Wireless-G devices...


Platforms: Mac

Link Logger is the leading professional firewall logging tool for routers running DD-WRT, Tomato, etc firmware (eg Linksys WRT54G/GS/GL, WRT160N, etc). Link Logger helps you monitor your internet traffic including where, when and how your users are using the internet and what malicious traffic is...


Platforms: Windows

This free version can only restore typical firmware malfunction of Maxtor 541DX series HDDs but not for others.If you need to restore other series of Maxtor HDD, you can purchase our professional version Maxtor Firmware Repairer PRO.


Platforms: Windows

This free version can only restore typical firmware malfunction of Maxtor 541DX series HDDs but not for others.If you need to restore other series of Maxtor HDD, you can purchase our professional version Maxtor Firmware Repairer PRO.


Platforms: Windows

When you set a Firmware password, it prevents others from starting up the computer from a volume other than the one you have chosen as the startup disk (chosen in the Startup Disk preference panel within the System Preferences.) Once security is enabled, you cannot startup from other devices such...


Platforms: Mac

This firmware update is for customers using Mac OS X version 10.2 (Jaguar) or later with an Apple Cinema HD Display and a Power Mac G4 with one of the following NVIDIA graphics cards: GeForce2 MX, GeForce2 MX TwinView, GeForce3, or GeForce4 MX. These cards require the update to support the high...


Platforms: Mac

LED Cinema Display Firmware Update addresses intermittent audio issues some users have experienced while using the 27-inch LED Cinema Display. This is a different update from the LED Cinema Display Software Update 1.0 released in September 2010. The updater application will be installed in the...


Platforms: Mac

Linksys Cameras Viewer is an application where you can view your IP Linksys cameras on your MAC. No Java Or ActiveX is required. You can build unlimited number of cameras to view them. Linksys Cameras Viewer supports th


Platforms: Mac

This update is for specific iMac computers with an ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card installed, running Mac OS X 10.5.2 or later. It updates the ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card firmware in the iMac to improve system stability. This...


Platforms: Mac

This update is recommended for all Mac Pro (Mid 2010) models and addresses the following issues: * Resolves an issue that prevented the firmware password prompt from being displayed * Resolves an issue that prevented the Boot Picker from being presented if Ethernet is connected to a network...


Platforms: Mac

This update includes changes to the Lights-Out Management environment of the Xserve (Early 2008). It addresses issues that cause frequent power supply and fan notifications to be sent. This update is strongly recommended for all Xserve (Early 2008) systems. The Xserve Lights-Out Management...


Platforms: Mac

This update fixes several issues to improve the stability of Xserve computers. To complete the firmware update process, perform the following steps: 1) Locate Xserve EFI Firmware Update.app in /Applications/Utilities and double click on it. 2) Follow the onscreen instructions. If you will be...


Platforms: Mac

This update fixes intermittent system freeze issues for iMac computers with ATI Radeon HD 4850 graphics and fixes wake-from-sleep issues in Boot Camp. To complete the firmware update process, please follow the instructions in the updater application (/Applications/Utilities/iMac EFI Firmware...


Platforms: Mac

Apple Mac mini EFI Firmware Updater includes fixes that enhance the stability of Lion Recovery from an Internet connection, and resolve issues with Apple Thunderbolt Display compatibility and Thunderbolt Target Disk Mode performance on Mac Mini (mid 2011) models.


Platforms: Mac

Apple MacBook Air EFI Firmware Update includes fixes that enhance the stability of Mac OS X 10.7 Recovery from an Internet connection, and resolve issues with Apple Thunderbolt Display compatibility and Thunderbolt Target Disk Mode performance.


Platforms: Mac

Thunderbolt Display Firmware Update improves the stability of the Apple Thunderbolt Display. The updater application will be installed in the Utilities folder inside the Application folder and will be launched automatically when you close this installer. Please follow the instructions in the...


Platforms: Mac